Furnace for a bath with your own hands made of metal - drawings

click fraud protection
Contents:
  • Advantages of
  • How to make a sauna stove?

A good bath is a means for conducting health procedures and rest. It's doubly nice if the bathhouse is in the country or in the garden. For a home steam room, the best option is an oven with electric heating. At the dachas the metal ovens were well proven. Such devices are available for free sale, they can be made to order from masters or independently. Let's consider in this article, how the oven for a bath is made by own hands from metal - drawings and algorithm of work.

to the contents ↑

Advantages of

The advantages of metal sauna furnaces include:

  • The ability to write a product in the interior as it is convenient for the owner.
  • Light weight, durability. This makes it possible to transport the device even in the car trunk.
  • The design of the furnace makes it possible to improve it with minimal costs of materials and money.

The production of a metal oven for a bath with your own hands begins - drawings and design. We must determine the size and geometry of the product, choose the place where it will stand. In this case, it is necessary, first of all, to take into account own ideas about convenience and the need for heating( it is clear that without compromising safety).Drawings can be downloaded from the Internet, improving them for their needs.

Important! The productivity of the product is determined from such considerations: for one cubic meter of the room of a steam room - 1 kg of wood fuel.

to the contents ↑

How to make a sauna stove?

No special types of metal are needed for this. It will take only ordinary sheet metal and pipes. The design is thought-out and uncomplicated, so it's quite possible to assemble it with your own hand.

Important! The oven for a bath of metal can easily heat a fifteen-room room steam room.

Device

The product consists of such parts:

  • At the bottom of the housing is a furnace, designed for 15 kg of firewood.
  • A heater with a hole for laying stone and water supply.
  • Hot water tank. The water is heated through the wall of the chimney. The top removable cover allows easy maintenance and cleaning of the tank. Water can be topped up or by means of a special tap built into the boiler wall.

Important! The heater and the water tank are separated by a chamber for storing soot. It is necessary to provide this chamber with a closing window to periodically clean out the soot accumulated there.

Preparing the

Before starting work, check the integrity of the pipes. It is important that there are no cracks on them so that they are not deformed. Using a sandblaster, clean the pipes of rust and oxide layer.

Important! If there is no sandblaster, you can use a special brush for metal. Do not use chemicals based on phosphoric acid.

Materials for work

So, you need:

  • Metal sheet with a thickness of 5 mm, with dimensions of 600x3500 mm.
  • Welding equipment.
  • Water tap.
  • Fittings for the manufacture of an opening door.

In addition, metal pipes will be needed:

  • A 1.0 m section with a diameter of 108 mm - to divert gases from the furnace.
  • 4 pieces with a diameter of 60 mm - for heating the heater.

Important! The advantage of the proposed design is its safety. The biggest risk when operating a sauna stove is carbon monoxide poisoning. In this model, this risk is minimized, because the seams will be a little.

Operation procedure:

  • Mark the pipe according to the dimensions.
  • Cut out six circles of sheet metal with a diameter of 500 mm.

Important! For this purpose, you can use an angle grinder or gas welding. Two of these six circles will go to the top and bottom of the bottom of the furnace.

  • Mark the location of the top of the furnace. Using the chalk, mark the positions of the heater, the furnace door and the ash pan.

Important! Cut out the holes with the utmost care, using the "bulgarian".Rectangular pieces of metal sheet will be used to make doors.

  • Weld to the door of the hinge.
  • In a metal circle designed for the top of the furnace, cut out 4 holes with diameters of 6 cm, weld the pieces of pipes for heating the heater.
  • At the ends of the heat pipes, install a round piece for the heater and weld. It turned out two metal circles, connected by 4 pipes.
  • Place the furnace body vertically, place the resulting workpiece inward. Using electric welding, weld the upper part of the round-shaped furnace into place. The welding should be of the best quality.
  • Turn over the stove. In the same way, weld the round top of the intermediate chamber.
  • Weld the grates and the bottom of the water tank. For the production of the bars, one of the round blanks can be used by drilling 10 mm holes in it at a distance of 1.5-2.0 cm.

Important! There is also a more preferable option: the purchase of a ready-made cast iron grate with the appropriate dimensions. Bolts and metal strips are used for fixing the bars.

  • Make the top cover for the hot water tank in such a way that it can be easily removed. To fix it, you can use fixatives. Chimney seal with a special ring.
  • The final stage of manufacturing is the installation of doors on the stove, ash pan and furnace. The window, intended for cleaning soot in the intermediate chamber, it is desirable to fix with bolts with a sealing gasket.

Finishing and installation

For coloring the best option will be silicone paint, capable of withstanding high( up to 250 degrees) temperature. For painting the walls, paints with a base of powder aluminum are best.

Important! Install the oven on a fireproof base. To avoid burns, it is advisable to use a removable casing of heat-insulating material.

Everything's ready! Now you have a detailed step-by-step algorithm for creating a stove for a bath with your own hands made of metal. Use it, after having thought everything over, drawing up a detailed drawing, then the result of the work will be good.