- Why this film is needed?
- What does the film consist of?
- How to clean plastic windows from old film mechanically?
- How to remove the film chemically?
- How to wash plastic windows?
Repair is over, new windows are on the windows, builders have brought openings in order. It would seem that you can safely wait for the winter to check whether the PVC windows are as good as they are said. But you absolutely do not think that you have got rid of all the problems. All windows are covered with a protective layer, and you will have to tear it apart. About how to remove the film from the plastic window, if it is not removed, we'll talk.
to the contents ↑Why this film is needed?
Why are the masters installing PVC windows not tearing this film off? The fact is that the installation of double-glazed windows repair usually does not end, but only begins. After that, repair the openings, and then the entire room. In addition, the glass can be scratched during transport and during installation. To avoid all these troubles, glue the protective material.
The instructions say that the protection must be removed from the plastic windows no later than ten days after installation. It is best to do so, because otherwise you will not have to take it off with a slight movement of your hand, but it's much more difficult to decide how to tear off the film from plastic windows.
Important! It is necessary to remove not only the film, but also the adhesive layer, which always remains on the profile.
to the contents ↑What does the film consist of?
Before thinking about how to remove the protective film from PVC windows, you need to know what you have to deal with. Then the methods of cleaning will be easier to pick up. The protective material has: an
- outer layer, which is usually removed without difficulty;
- inner layer;
- adhesive strip, which is tightly attached to the profile.
Important! The inner layer is so capricious that it melts even from the spring sun.
to the contents ↑How to clean plastic windows from old film mechanically?
For the mechanical cleaning method you will need:
- blade;
- knife;
- hairdryer;
- solvent for glue;
- soap solution;
- brush;
- scraper for cleaning ceramics.
Option 1
It's necessary to act very carefully to avoid scratching the profile. Protective material is easier to tear off if it is properly heated. To do this, you need a hairdryer - you can take and household, but it's better if there is an industrial one, which in some construction stores are rented. Having prepared everything you need, get to work to remove the film from the plastic windows:
- Warm the surface with a hairdryer so that the protection is swollen. In this case, the jet of hot air should not fall on the PVC profile - it can be extremely sensitive to high temperatures.
- Pull the edge of the film with a sharp object - it should separate easily.
- With a thinner, remove the adhesive strip.
Important! It should be removed with a knife or a blade evenly and quickly so that the material does not cool down. Otherwise, the result may turn out to be inverse, the film will not simply not be removed, but will become even more stuck.
Option 2
This method is good if the windows are on the shady side. Make a soapy solution, moisten the brush and centimeter after centimeter, rinse all the protective coating.
Important! A metal brush for this job can not be used.
Option 3
The film from the plastic windows can be removed using a conventional school eraser. True, the process is labor-intensive, so it's better to shoot small fragments, for example, after removing it with a knife.
Option 4
The construction scraper perfectly removes such a protective material for cleaning ceramic and glass surfaces. Buy this can be in the building store.
Important! The advantage of this method is that the scraper does not scratch the plastic.
to the contents ↑How to remove the film chemically?
This method is more sparing than mechanical. The danger that you will scratch your precious plastic is much less. In addition, even thoroughly adherent coating fragments can be removed with the help of solvents. There are many chemical ways to remove film from plastic windows, if it is not removed.
For the procedure are suitable:
- "Kosmofen";
- white spirit;
- is any other solvent.
Option 1
For the removal of protection, the special "Kosmofen" is simply ideal. You can buy it in the same company that put you PVC windows. There are several varieties of this drug. It is best to buy it from those who put the windows, because the relevant goods are picked up by a solid firm for the material from which the main products are made.
Option 2
Excellent tool for cleaning PVC material - white spirit. But remember that it does not dissolve the film, but separates it from the window. Therefore, you will need some sharp object, such as a blade or knife:
- Pry the edge of the protective coating.
- Pour in the resulting clearance of white spirit.
- Remove the film.
Option 3
You can try using a solvent. The method is not very reliable, but sometimes it gives good results. Not every solvent is suitable, and it is better to pre-test it somewhere in a subtle area.
to the contents ↑How to wash plastic windows?
After the protective coating is cleaned, the window is best washed. To clean the profile suitable soft detergents - do not forget to check the label at the hardware store. There are special means for washing such products, but those suitable for ceramic surfaces are also suitable.
Important! To wash is better not a rag, and a foam sponge.
Process Order:
- Erase dust from window sill and window frames.
- Make a detergent solution.
- Use a zigzag pattern to wash the glass.
- Wipe it with a soft cloth or paper.
Important! To give the glass shine, at the end wash with its aqueous solution of ammonia - just a few drops per 1 liter. If you wash the windows for the winter, then to prevent frost and snowiness of the window, rinse it with salt solution from the outside.
Now you have an idea of several ways how to remove film from plastic windows, if it is not removed. We hope you managed to find the right version and you managed to accomplish this task as quickly and conveniently as possible for you. Enjoy the comfort, warmth and silence in your home.
