- Backpack "Cat"
- Backpack for a boy with a machine
- Denim rucksack for a girl
- Nyusha backpack
Nowadays a backpack is absolutely necessary for every inhabitant of the planet. Unsurprisingly, in fact for walking it is necessary to take a lot of things, and in a handbag it simply will not fit. Children's needs are not an exception, because even for an ordinary walk, we often take a lot of things. Our article will help you - here you will learn how to sew a children's backpack with your own hands. Pattern and review of the necessary materials, tools - everything will be considered as thoroughly as possible.
back to content ↑Kitty backpack
In order to make such a useful and original accessory for your child, you must stock up on the following items:
- A dense material of pleasant color.
- A fabric to be used as a lining.
- A small piece of lace.
- Lightning.
- Buttons and colored threads for decoration.
Take an album sheet of plain paper. The size of the product will be as follows:
- Width - 20 cm.
- Length - 30 cm.
Important! Dimensions can be different. It all depends on how old your child is.
Patterns
Now it is necessary to make a pattern of the backpack base, the seal and the fish in its paws.
Next, you need to lay out the patterns on the fabric:
- Backrest - one piece of base fabric and lining fabric.
- The front part - the situation is the same( you need to cut through the fastener line).
- The upper straps are two parts, the dimensions of which are 7 by 43 cm.
- The bottom straps are two pieces each, however, their dimensions will be 7 by 25 cm.
- 1 pocket having a size of 17 by 13 cm.
- The fish is any size.
- Four paws - dimensions are also determined according to your desires.
Master work execution class
You can sew a backpack for a girl with your own hands with patterns as follows:
- Sew the paws of the seal. To do this, make cuts, turn them out, then put the sintepon inside the "bag", then stitch or embroider the cat's fingers.
- Stretch the straps by turning them and stitching them with decorative seams on the sides. At the edges of the straps fastened rivets.
Important! It is necessary to sew one edge of each strap - this is necessary in order to prevent the fabric from splashing.
- Make a pocket. To do this, bend the edges of the prepared fish and sew it to the pocket with a zigzag seam. Further, the edges of the pocket are treated with the same seam.
- Decorate the top edge of the pocket. To do this, you need to sew a prepared lace to it.
- Embroider on the pocket of the cat's paws, with which he holds a fish.
- Sew a pocket to the bottom of the front of a non-finished product, embroider the rest of the paws of the kitten, not forgetting to pay special attention to the fingers.
- Go to the design of the face - to embroider his eyes and tendrils.
- The zipper needs to be swept between the top and bottom of the front, then stitch it.
- Attach the prepared paw to the cat.
- Connect the front and back of the backpack with safety pins.
- Stitch and cut in places where the seam is rounded.
- To finish with the tailoring of a children's backpack bag with your own hands, it is necessary to make a lining. To do this, it must be stitched and left 1 cm for the inside of the backpack pocket.
- Unscrew the finished cat and insert the lining into it, then bend it and pin it to the zipper inside.
- Manually sew it to the fastener using a hidden seam.
- Next on the upper straps, you need to make 3 loops, and on the lower straps sew on two decorative buttons.
The work is finished.
to the contents ↑Backpack for a boy with a machine
Before you start to sew an accessory for your little son, you need to come up with a detailed sketch, which will take into account it and your wishes.
The process of manufacturing a backpack for a boy with his own hands is as follows:
- Making a paper pattern. Measure your baby's back and count on paper. Consider the option where the bottom turns rounded, and the top will narrow( and there may be tucks on it).
- Fold the fabric with a pattern downwards, trace the pattern obtained earlier.
- Circle and cut the workpiece, leaving 1 cm to the allowances.
- Sew all desired decor elements.
- Seal with dublerin - this is necessary to ensure that the product has become negligent.
- Flash stitching.
Make 2 rectangles 7 by 4.5 cm in size. Fold them in half with a pattern inside, stitch along the edge, then unscrew and iron. As a result - it turns out 2 hlyastiki in order to fix the straps of the children's backpack with their own hands for the boy.
- Proceed to staple the two main parts of the backpack - measure the identical distance from the top of the bag to the wrist and pin it with English pins. It is necessary to connect both parts in such a way that the darts turn out to be as one continuous, then execute the seams.
Important! Sew all with the hoodies.
- You must always process the top of the backpack with an overlock or zigzag.
- Bend and sweep the top.
- Cut rectangles measuring 25 by 7 cm( 2 pieces), process their edges.
- Fold in half facing up, process the bottom.
- Sweep and then sew the strips to the almost ready-made accessory.
- To continue the work it remains to attach the harnesses. Their length is calculated from the growth of your child, the width is 5-6 cm.
- Sew the rectangles around the edge, turn them inside out, iron.
- Pull the edges of the gloves inside and stitch along the edge.
- Sew the finished straps in a circle, then tie the ends into knots.
Children's backpack for the boy from 2 years with his own hands is ready.
to the table of contents ↑Denim backpack for the girl
Jeans fabric accessories are very original and practical, and children's backpacks are no exception. Also it is worth noting that the hand-sewn backpack will always be original and unique.
You can sew such an accessory by following the algorithm proposed below:
- Prepare the two lower legs of jeans trousers.
- Align them to the top.
- Open the legs and smooth.
- Align the resulting canvases so that the seam is in the center. Superfluous need to be cut so that the width was 35 cm, and the length is 32 cm.
- Take the finishing fabric and threads that will fit into this fabric.
- Decorate the front of the accessory with decorative stitches if desired.
- Connect the two canvases face down, leaving a hole to extend the cord into it.
Important! For pens of an almost sewn baby backpack for a girl it's better to take a thick cord 4 m long( the color depends on the design of the accessory).
- Take the fabric for finishing and find the strips 14 by 37 cm. Turn the edges, stitch, fold the strips in half.
- Attach finishing material to the top of the accessory.
- Insert the cord.
- Fasten the cord at the back of the rucksack, thread it in the hole, secure it to the underside.
Backpack is ready!
to the contents ↑Nyusha backpack
This section will describe in detail how to sew a children's toy backpack.
For further work you need to stock up with the following materials:
- Fleece white and three tones of pink.
- Calico.
- A piece of any black material.
- Foamed polyethylene - this is necessary in order for the accessory to hold a shape( such material can be found in shops for construction).
- Two-meter belt tape.
- Adjusters for belts - 2 pieces.
- Castle.
- Hollofayber - is needed in order to stuff the handles and legs.
- Sharp scissors.
- Threads that match the color.
- Sewing machine.
In order to sew a children's backpack for a girl, it is necessary to perform the following actions:
- To cut out the handles, legs and face of the cartoon character, print it on the printer.
- Draw a circle with a diameter of 25 cm, make two pieces from the lightest shade of a pink fleece, leaving 1 cm to the allowances.
- Cut the same circles from polyethylene and coarse calico.
- Start manufacturing parts of Nyusha's face. Eyes are best made from white fleece, eyelids and hair - from dark pink, and the nose and hearts - from the middle tint. There is no need to leave allowances.
Important! It is better to draw all the details in advance with chalk - this is necessary to ensure that all the details are located exactly.
- Cut out a piece of black tissue pupils.
- Connect circles from all materials.
Important! Between fleece and polyethylene, you can put a sintepon, so that Nyusha's eyes and nose are bulky.
- Sew two parts of the backpack on the right.
- Sew to the Nyusha muzzle. All the details are sewn in a zigzag - to start better from the eyes, then continue with a nose and hearts.
Important! During the sewing of eyelids and hair, it is better to use dark pink threads, and pupils to use black.
- Zigzag stitching to embroider shine on the pupils, mouth, eyelashes and nostrils so that the picture on the sewn baby backpack for the girl was better visible.
- Cut a strip of 54 by 6 cm from three materials, where the fleece is light pink. Leave the allowances for 1 cm
- Connect the strips together, sew them around the edge of the sewing machine. If desired, you can cut out the continuation of the hearts and sew them with a zigzag stitch.
- To make two strips 26 by 2.5 cm from the darkest shade of fleece, as well as polyethylene and coarse calico, leaving the allowances on the seams.
- Sew them together along the edge.
- Attach the lock to the sewn strips.
- Cut the legs, pens, ears and plaits Nyushe, then sew them and unscrew them.
- Fill the pen and legs of the character using a holofiber.
- Sew these details to the backpack.
- Prepare the straps for the backpack. In the regulator you need to insert the belt tape, cut it for the loop.
Important! The edges of the loops can be bent on the machine, or burned with fire - this is necessary so that they do not dissolve.
- Sew the previously prepared stripes to the circle where the "muzzle" of the backpack is.
- Secure the straps on the back of the accessory, sew this part to the strip.
Important! If desired, you can sew a lining inside the accessory.
- Unscrew the "Nyusha".
A gift for your baby is ready!
From this article you learned a lot of ways how you can please yourself and your child by making him an interesting gift. Create and enjoy the work so that the result will make you happy!