Usually a 25-kilogram bundle of tile glue is very inexpensive. If you made a mistake with the choice, then a big disorder does not have to happen - it will not greatly affect your budget. But if you glue the tile on an ongoing basis? What then? After all, in that case you must stock up with a large batch of glue. If it suddenly turns out that it has bad coupling properties, then it will be a real financial disaster. And there will be a lot of time to re-tile the tiles. Not to mention the fact that delivering a heavy dry mix is not the easiest thing to do. That's why it's better to buy the perfect product right away, even if it costs a little more. Let's find out which tile adhesive is the best.
Contents:
- Tile glue which company choose
- Best tile glue
- What tile glue to buy
Tile glue of which company to choose
Now good tile glue has learned to do in many countries of the world. Including good copies from domestic producers. If you want to calculate the total number of companies producing tile glue, you can not do it. The fact is that some of them supply products only to the nearest cities. Few companies operate nationwide. And only abroad, tile glue is supplied only by the elite, whose products have already won many awards and positive reviews.
In Russia, the most popular tile glue under the following brands:
1. KNAUF
2. Bergauf
3. Ivsil
4. Ceresit
5. Unis
But in stores it is easy to meet the products of some other companies. And not necessarily it will be of poor quality - the competition in this market is very high.
Best tile adhesive
Eunice 2000
The manufacturer of this tile adhesive is so confident in their product that it even provides a 15-year warranty! Recently, this is indicated on the box with glue, right next to the manufacturer's logo. This product is designed for gluing mosaic and tile, as well as porcelain stoneware and natural stone. Work can be done not only indoors, but also outside. Dry glue easily tolerates even severe frosts. The material consumption is from 3.75 to 5 kg per square meter, depending on the severity of the tiles and climatic conditions.
Advantages:
- The solution is viable for three hours;
- Suitable for absolutely any tile;
- Not afraid of water, no subzero temperatures;
- The bond strength reaches 1 MPa;
- You can even out differences up to 15 mm;
- Fast drying.
Disadvantages:
- The work rate should be high.
Litoflex K80
First of all, this glutinous mixture was created for work with porcelain stoneware. But it is regularly bought and for gluing wall tiles. The product is considered professional, as it has high adhesion rates. Affect the glue can not either high or low temperatures. This allows you to recommend a glutinous mixture for the arrangement of warm floors, it is also possible to use it when laying tiles on a tile. Buyers note the high elasticity of the product, so that the solution can be applied in a thin layer, achieving a low flow rate.
Advantages:
- Minimum glue consumption;
- Not afraid of high or too low temperatures;
- Successfully holds even heavy ceramic granite;
- Available in different sizes.
Disadvantages:
- Too high cost.
Cesesit CM-11
Packing with this tile adhesive is not striking in beauty. But the product made by Henkel has excellent coupling properties. That's why it is used not only by ordinary people who decided to make repairs in their apartment, but also professionals engaged in finishing work for many years. The creators tried to make their glue universal. In this regard, he can not withstand a particularly heavy tile - this must be taken into account. But if the weight of the tile does not exceed the threshold value, then it will remain forever, because the adhesion of the product is equal to 1.0 MPa. At the same time, it is possible to glue the tiles even on the most flat surface.
Advantages:
- Optimal price tag;
- Fast enough to grasp;
- High adhesion;
- Can be used on uneven surfaces;
- Ideal for interior decoration.
Disadvantages:
- Not the best option for heavy porcelain stoneware;
- For exterior finishing works is not suitable.
KNAUF Fliesen
If you read the reviews of people involved in finishing work on a professional basis, it will give the impression that KNAUF Fliesen is an ideal glue. The dry mix from the German manufacturer is easy to induce, and it is extremely difficult to find fault with the quality of the work. This glue is equally good at laying tiles on the floor and on the walls. Also, the role of the surface is not important.
The adhesive dries slowly enough. But it goes to him even in a plus, as it is possible to have time to clear seams, to wipe them and if necessary to level a tile. The creators recommend applying their product in a layer of 0,7 mm. Even such a small amount of mass will reliably hold the tile, how severe it would not be. It turns out that a 25 kg package is enough for facing a very large room!
Advantages:
- Glue consumption can be called minimal;
- You can carry out works "under the comb";
- Slow drying allows you to clean and wipe the seams;
- Relatively low cost;
- Ideal for floor and wall tiles;
- No serious temperature changes are feared.
Disadvantages:
- None.
Keraflex Maxi
If you are going to make a large-format tiling, then you will need something special. The usual glue will not withstand so much gravity. But this tile can keep Keraflex Maxi from the company MAPEI.This glue is expensive, but it is plastic and convenient to work with, and it will be able to hold absolutely any construction materials. Slipping during laying is almost completely eliminated. As the creators say, their creation does not have any restrictions in the spheres of application.
Advantages:
- Ideally holds a very large tile on the vertical surface;
- Easy breeding;
- The adhesive is ductile, so it is easy to use;
- No pre-leveling of walls is required.
Disadvantages:
- The purchase will not be cheap.
Bolars WallFix Keramik
This adhesive differs from many competitors in that it comes in a plastic bucket. Its volume can be completely different - you can choose the amount of glue that is needed for the facing of a particular room. The product is acrylic, it is suitable for work with any tile and mosaic, the water absorption of which exceeds 3%.The surface can also be almost anything - the creators themselves mention cement plaster, concrete, screeds, plasterboard and gypsum plaster. The glue is not afraid of a strong temperature change, so it can be used to install a "warm floor" system. But the operating temperature should not go to minus, therefore the product is intended only for internal works.
Pluses:
- Holds almost any tile;
- Convenient packaging;
- Easy application;
- Environmentally safe;
- Adjustment time reaches half an hour.
Disadvantages:
- Does not stand the minus temperatures;
- Very high price tag;
- Increased consumption;
- Dry completely after a week.
Glims WhiteFix
If you are engaged in finishing a rich room, then it is possible that you will use natural stone. For its gluing it is impossible to apply ordinary tile glue, as its coupling properties simply will not suffice. Instead of it it is necessary to buy more expensive glue Glims WhiteFix. It is primarily designed specifically for working with natural stone. This product is delivered in the usual paper packaging, in which 25 kg of dry mix will be mixed.
The product is made in Russia. If the solution of ordinary tile glue is in working condition 2-3 hours, then with Glims WhiteFix it is possible to interact for up to four hours. And this is important, because working with a thin stone can take a lot of time. Also, this glue can be used for laying ceramic and glass mosaic, translucent luxury tiles and some other materials. Use the product is allowed not only indoors, but also outside. This opens up opportunities for finishing pools, balconies, terraces and other facilities. As it is easy to guess, glue is absolutely not afraid of water, therefore it can be used for facing the shower room.
Pluses:
- Retains even natural and artificial stone;
- Not afraid of frost or water;
- Optimal correction time;
- Drying time does not exceed 24 hours;
- The expense can not be called large.
Disadvantages:
- To many people it seems too expensive.
What tile glue to buy
1. If you are ready to work at a high rate, then you should think about buying Eunice 2000. In fact, this is an ideal tile adhesive. It dries quickly, then holding even the heaviest tile. But this is also a disadvantage - if you delay, you can not do anything with seams.
2. Litoflex K80 is ideal for facade cladding. When using it, you will be sure that the granite or tile will not fall off even if there are terrible frosts in your region. Absence of fear of a strong temperature change makes this mass a good choice also for laying warm floors.
3. Cesesit CM-11 must be purchased under two conditions. First, you are going to glue the tile for the first time. Secondly, the case will take place indoors, and not on the street. Also this glue will perfectly cope with its task in the event that the surface is not very even.
4. If you have the opportunity to purchase KNAUF Fliesen, then please use it. This tile adhesive does not have any serious drawbacks. It has a low consumption, the dried mass is not afraid of high or low temperatures, while the work can be carried out even in a room with uneven walls. It's amazing that packing with such glue is not worth any cosmic money!
5. Keraflex Maxi is the best heavy tile. This dry mixture is easily diluted, after which it can be applied even on an uneven surface. Its only drawback is the cost - 25 kg will cost four times more expensive than a similar volume of glue, which has less coupling properties.
6. If you need acrylic tile adhesive, you can purchase Bolars WallFix Keramik. As expected, this product is supplied in a plastic bucket. It has a high adhesion, but at subzero temperatures, the properties of the adhesive are significantly reduced. Therefore, this product is not intended for outdoor use.
7. In case of work with natural or artificial stone, you will have to buy Glims WhiteFix. This glue costs more than most other options, but it provides ideal coupling properties. The dried out solution is able to withstand both minus temperatures, and all sorts of splashes, and other troubles.
