Sooner or later every motorist has a question about replacing disks. It is completely unimportant whether this is a measure or simply a desire to improve your car, the choice should be made the very best. After all, the safety of the machine's operation largely depends on the discs. Most drivers prefer stamped discs, popularly called "stamps", and this is a very wise decision. These discs are quite durable, functional, convenient to install and are not so expensive. It is in connection with their popularity that our site decided to create a rating of the best producers of stamped discs, so that every newcomer in this path could make a worthy choice. The material presented below is completely based on customer feedback, so you can have no doubt about its objectivity.
The best producers of pressed discs
KFZ
One of the largest companies for the production of pressed discs in Europe. It is part of a large holding company, whose production is based in such countries as Austria, Switzerland, Germany, Czech Republic, Spain and Brazil.
The manufacturer represents the steel punching discs on the market of their services for many years. A large number of world-famous automotive companies order stamped disks for basic assembly of their cars from KFZ.Such brands as Toyota, VW, Alfa Romeo are regular partners of the company. Established production in 35 plants located around the world, allows the brand to have a huge audience.
Innovative production technologies and the use of high quality metal help to achieve a high level of strength of the finished product. Also, KFZ punched discs have excellent design and reasonable prices.
Fully certified products are presented in more than 500 sizes. The selection of disks can be carried out completely on any machine. In Russia, the most common "stamps" have the dimensions of R13-R16.Annually, a high level of sales and excellent product reviews are guaranteed to add the manufacturer to the "white list".
Advantages:
- highest reliability;
- light weight, an average of 15-25% lower than that of other manufacturers;
- thanks to 3-layer coating technology, high resistance to corrosion processes is available;
- attractive design;
- wide range and variety of models;
- reasonable prices.
Disadvantages:
- , many buyers note that the ends of surfaces are highly susceptible to oxidation.
Dotz
Pedantic Germans managed to establish production of some of the best stamped discs in the world, produced under the DOTZ brand. Initially, the company produced products under three fundamentally different brands( besides DOTZ, there were AEZ and ENZO), but later united them into a single Alcar group, and now, mainly, it produces goods from the first.
The most common products of the company in Europe, where most of the manufacturing plants are located. Disks of their production belong to the class of elite and semi-elite, as a result of which the price for them is not small. Unlike the previous brand, it supplies discs to automakers for equipping them with far from basic equipment sets.
Young people, the so-called new school, work at the head office of Germany to create "stamps".This gives tangible results, now, in addition to excellent quality, all the disks have an excellent design. Mostly the goods are aimed at fans of fast races and tuners. But buying them even for everyday driving, it's more likely that your children will be thinking about buying new ones( this is not an exaggeration).
Quite a wide range and variety of products provides the manufacturer with millions of customers annually.
Advantages:
- excellent quality and reliability;
- high level of corrosion protection;
- guaranteed operation safety;
- ideal surface treatment of the disk, no chips, scratches, cracks, etc.;
- a large number of kinds of design;
- wide assortment.
Disadvantages:
- high price;
- a large number of counterfeits on the market.
Mefro
Another manufacturer that started its activity in Germany. The first large-scale appearance of stamped disks for cars in the market was in 1997 in Russia. The company immediately managed to establish itself as an excellent brand. To date, the main factories for the production of products are in Germany, France, Turkey, Argentina, Russia, China, South Korea.
Disks from this brand are sold everywhere due to their availability. Just think about the production of this company annually equipped with about 25 million different machines, with a financial turnover of more than 400 million euros. Such figures speak much about the prestige of the organization.
Excellent corrosion protection, strong production steel, durability and low prices attract more and more new customers to the manufacturer. It is also worth noting the versatility and diversity of production. In the range of products from Mefro you can find disks for tractors, trucks, caravans, motorcycles and cars.
Advantages:
- excellent quality and strength of products;
- is a good anti-corrosion treatment;
- no complaints about safety use was revealed;
- wide and diverse assortment;
- low prices.
Disadvantages:
- despite the cheapness of the drives from Mefro, the market is just full of substandard counterfeits.
TZSK
The most eminent Russian manufacturer of pressed discs. Togliatti Steel Wheel Plant( TZSK) rightfully occupies leading positions in sales on the Russian car market. At the moment the company does not seek to enter the international market, since since 2004 it has been successfully working with clients in Russia.
The company cooperates and delivers discs to such world famous manufacturers as Ford, Renault, VW, AvtoVaz and Izh-Auto. The production takes place at a single factory with a total area of about 12,000 m2, to which all the necessary resources are available on its own railway tracks and communications, which makes it possible to produce a product that fully meets all European standards.
Annually about 1,5 million wheels leave the assembly line, that for the market of one country one of the best results in the world. The size of the discs varies from 13 to 16 inches. The assortment allows you to choose "punchings" to the 15 most common brands of cars in the CIS.Low prices and excellent quality allowed the manufacturer to rally around him a lot of customers.
Advantages:
- high quality of execution, thanks to the completion of all work on production in one place;
- these discs are the easiest in our rating;
- safety in operation;
- low cost;
- wide assortment, and selection to a certain brand of cars.
Disadvantages:
- low quality paint, after a couple of seasons it will begin to peel;
- many Chinese fakes.
Trebl
An Asian company that produces steel stamping discs. More than 70-80% of the products are exported to all points of the world: North America, Australia, Asia, Europe. On the Russian market the manufacturer since 2008, after the opening of the plant near St. Petersburg. Also stamped Trebl disks are delivered for basic complete sets in large autoconcerns( Ford, GW, VW).
The company values its reputation, therefore, in production, all, without exception, discs are tested for quality( beat, imbalance, etc.).The company is ready to offer high-quality disks at reasonable prices. The variety and breadth of the assortment will make it possible to choose the necessary products absolutely for every customer who is represented, as well as for cars, trucks, and passenger transport.
All the goods of the manufacturer have passed full certification according to the European standard ISO 16949 and in the State Standard of the Russian Federation. The main advantage of the company, consider the wide variety of options for different brands of cars, sometimes only it can find the option of replacing the original foreign-made drive, since other plants do not produce them.
Advantages:
- good quality and durability;
- guarantees the absence of beats, imbalances and other operational defects;
- great choice;
- reasonable prices.
Disadvantages:
- weak corrosion protection.
Which manufacturer's stamped discs to choose
1. If you just need reliable disks for everyday use of the car, then it's worth choosing among Mefro, TZSK and Trebl."Stamps" of these manufacturers have about the same resource of strength and budgetary pricing. In the case of non-aggressive use, they will quietly serve you within 5-10 years. Yes, due to their low cost, they have some drawbacks, but they are mostly of a cosmetic nature and can be easily eliminated with their own hands, literally for "kopecks."
2. But it should be understood that if you are set on aggressive driving or even racing, the stamped discs should be of the best quality. In our rating, these include KFZ and Dotz. Disks from these enterprises have proved themselves, as one of the most durable, reliable and beautifully designed. But for such a quality will have to pay a considerable amount, of course, it all depends on your capabilities. You can say one thing, these CDs are worth it and will truly serve you for more than a decade.