Description Motor boat ALTAI 320L manufactured by TONAR Group of Companies is a lightweight version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Orange / White;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motor boat ALTAI 320L manufactured by TONAR Group of Companies is a lightweight version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motor boat ALTAI 320L manufactured by TONAR Group of Companies is a lightweight version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Green;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motor boat ALTAI 320L manufactured by TONAR Group of Companies is a lightweight version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Orange / Black;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motor boat ALTAI 320L manufactured by TONAR Group of Companies is a lightweight version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour White gray;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI 340L manufactured by TONAR Group of Companies is a light version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Green;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI 340L manufactured by TONAR Group of Companies is a light version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI 340L manufactured by TONAR Group of Companies is a light version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour White gray;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI 340L manufactured by TONAR Group of Companies is a light version of ALTAI series boats. The robust construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments ensure your safety on the water. The increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 4-5 seconds. The boat has a hard floor made of waterproof plywood 9 mm thick, which is easily assembled using special aluminum profiles and two stringers. The rough surface of the floor allows you to stand firmly in the boat. The boat and the floor are packed compactly in one bag, which allows the boat to be transported in the trunk of any car. The transom, floor and cans are made of special moisture-resistant plywood that does not absorb moisture at all. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Orange / Black;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 113x71x36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI A320 is a lightweight version of boats of the ALTAI series produced by TONAR Group of Companies. Reliable construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments and an inflatable bottom guarantee your safety on water. A low pressure inflatable bottom with increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 3.5 seconds. The boat has improved stability, which is rightly appreciated by spinning anglers who often fish while standing. The weight of the complete set is only 35 kg. It is compactly packed in one bag, which allows you to transport the boat in the trunk of any car. The transom and cans are made of special moisture-resistant plywood that absolutely does not absorb moisture. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Green;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 1.3x0.71x0.36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI A320 is a lightweight version of boats of the ALTAI series produced by TONAR Group of Companies. Reliable construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments and an inflatable bottom guarantee your safety on water. A low pressure inflatable bottom with increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 3.5 seconds. The boat has improved stability, which is rightly appreciated by spinning anglers who often fish while standing. The weight of the complete set is only 35 kg. It is compactly packed in one bag, which allows you to transport the boat in the trunk of any car. The transom and cans are made of special moisture-resistant plywood that absolutely does not absorb moisture. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Orange / Black;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 1.3x0.71x0.36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI A320 is a lightweight version of boats of the ALTAI series produced by TONAR Group of Companies. Reliable construction is made of five-layer reinforced PVC with a density of 900 g / m2, three sealed compartments and an inflatable bottom guarantee your safety on water. A low pressure inflatable bottom with increased deadweight provides exceptional boat handling. The boat smoothly passes the wave and enters the planing mode in 3.5 seconds. The boat has improved stability, which is rightly appreciated by spinning anglers who often fish while standing. The weight of the complete set is only 35 kg. It is compactly packed in one bag, which allows you to transport the boat in the trunk of any car. The transom and cans are made of special moisture-resistant plywood that absolutely does not absorb moisture. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Boat equipment Foot pump 5 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 3,2;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 900;
Boat packing size 1.3x0.71x0.36;
Carrying capacity 450;
Maximum motor power 15;
Passenger capacity 3;
Cockpit length 2,17;
Cockpit width 0,75;
Description Motorboat ALTAI S340 manufactured by TONAR Group of Companies is designed for fishing, hunting and active recreation on the water. The boat was specially designed for operation on large rivers and reservoirs. Due to the increased deadweight, it holds the wave well, is easily controllable, quickly enters the speedboat and has high maneuverability. The boat has an increased cockpit capacity without losing its speed qualities. The increased diameter of the side allows the operation of powerful and heavy engines. Splash guards on the transom are standard. The boat has a hard floor made of waterproof plywood, which can be easily assembled using special aluminum profiles. The fastening of two cans to the cylinders on the boat is made according to the lyctro-liquefaction technology, due to which they can be adjusted along the length of the boat. The drain valve, built into the transom, allows water to be removed while the boat is moving under the engine, which significantly increases the comfort during operation. To protect the keel from cuts and abrasions, a PVC profile is installed on the boat, and it also protects the stringers from the bottom, the lower edge of the transom and the lower part of the boules. In the manufacture of the boat, a five-layer reinforced PVC material 1100g / m2 is used. produced by leading companies, as well as the best components on the market.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour White;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3 + keel;
Bead diameter 0,47;
Density of PVC balloon 1100;
Carrying capacity 500;
Maximum motor power 18;
Passenger capacity 5;
Cockpit length 2,35;
Cockpit width 0,75;
Description Motorboat ALTAI S340 manufactured by TONAR Group of Companies is designed for fishing, hunting and active recreation on the water. The boat was specially designed for operation on large rivers and reservoirs. Due to the increased deadweight, it holds the wave well, is easily controllable, quickly enters the speedboat and has high maneuverability. The boat has an increased cockpit capacity without losing its speed qualities. The increased diameter of the side allows the operation of powerful and heavy engines. Splash guards on the transom are standard. The boat has a hard floor made of waterproof plywood, which can be easily assembled using special aluminum profiles. The fastening of two cans to the cylinders on the boat is made according to the lyctro-liquefaction technology, due to which they can be adjusted along the length of the boat. The drain valve, built into the transom, allows water to be removed while the boat is moving under the engine, which significantly increases the comfort during operation. To protect the keel from cuts and abrasions, a PVC profile is installed on the boat, and it also protects the stringers from the bottom, the lower edge of the transom and the lower part of the boules. In the manufacture of the boat, a five-layer reinforced PVC material 1100g / m2 is used. produced by leading companies, as well as the best components on the market.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour White;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3 + keel;
Bead diameter 0,47;
Density of PVC balloon 1100;
Carrying capacity 500;
Maximum motor power 18;
Passenger capacity 5;
Cockpit length 2,35;
Cockpit width 0,75;
Description Motorboat ALTAI A340 produced by TONAR Group of Companies with an inflatable low pressure bottom is intended for fishing, hunting and active recreation on the water. The boat was specially designed for operation on large rivers and reservoirs. The inflatable bottom increases the total air volume in the boat and, as a result, increases the buoyancy of the boat. Thanks to the modified design of the inflatable bottom and an increase in the deadweight, the germination rate on the wave improves, and the boat easily goes to planing, confidently holds the course and develops speed well. The overall thickness of the NDND has been increased, and therefore there is no need to pump the bottom to the maximum values. The stationary transom made of 25 mm thick moisture-resistant plywood is protected by a special U-shaped profile along the upper edge. The spoiler, located at the bottom of the boat bottom, not only stabilizes the water separation from the transom, preventing splashing behind the stern during planing of the boat, but also protects the bottom from damage. The increased diameter of the side (0.47 m) allows the operation of powerful and heavy engines. To protect the keel from cuts and abrasions, a PVC profile is installed on the boat, and the lower part of the boules is also protected by it. In the manufacture of the boat, a five-layer reinforced PVC material 1100g / m2 is used, as well as the best components on the market. The boat is supplied with a standard set of accessories: a 5L foot pump, 2 oars with paddle holders in the oarlock, 2 hard seats, bag for storage and transportation, repair kit and operation manual (passport). Characteristics of the boat ALTAI A340: Length overall - 340 cm. The largest width is 169 cm. Cockpit length - 235 cm. Cockpit width - 75 cm. The diameter of the balloon is 47 cm. The pressure in the cylinders / bottom is 0.24 kgf. The number of inflatable elements - 3 + 1; Loading capacity - 500 kg. Passenger capacity - 5 people. Product weight in a set - 43 kg. Packing size - 113x71x36 cm. Maximum engine power - 15 HP The boat comes with a standard set of accessories: Foot pump 7 l. 2 paddles with paddle holders in the oarlock. 2 hard seats. Packing bag. Repair kit and operation manual (passport). Design features: The transom and cans are made of special moisture-resistant plywood, which absolutely does not absorb moisture. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Colour Green;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 1.3x0.71x0.36;
Carrying capacity 500;
Maximum motor power 15;
Passenger capacity 5;
Cockpit length 23,5;
Cockpit width 0,75;
Description Motorboat ALTAI A340 produced by TONAR Group of Companies with an inflatable low pressure bottom is intended for fishing, hunting and active recreation on the water. The boat was specially designed for operation on large rivers and reservoirs. The inflatable bottom increases the total air volume in the boat and, as a result, increases the buoyancy of the boat. Thanks to the modified design of the inflatable bottom and an increase in the deadweight, the germination rate on the wave improves, and the boat easily goes to planing, confidently holds the course and develops speed well. The overall thickness of the NDND has been increased, and therefore there is no need to pump the bottom to the maximum values. The stationary transom made of 25 mm thick moisture-resistant plywood is protected by a special U-shaped profile along the upper edge. The spoiler, located at the bottom of the boat bottom, not only stabilizes the water separation from the transom, preventing splashing behind the stern during planing of the boat, but also protects the bottom from damage. The increased diameter of the side (0.47 m) allows the operation of powerful and heavy engines. To protect the keel from cuts and abrasions, a PVC profile is installed on the boat, and the lower part of the boules is also protected by it. In the manufacture of the boat, a five-layer reinforced PVC material 1100g / m2 is used, as well as the best components on the market. The boat is supplied with a standard set of accessories: a 5L foot pump, 2 oars with paddle holders in the oarlock, 2 hard seats, bag for storage and transportation, repair kit and operation manual (passport). Characteristics of the boat ALTAI A340: Length overall - 340 cm. The largest width is 169 cm. Cockpit length - 235 cm. Cockpit width - 75 cm. The diameter of the balloon is 47 cm. The pressure in the cylinders / bottom is 0.24 kgf. The number of inflatable elements - 3 + 1; Loading capacity - 500 kg. Passenger capacity - 5 people. Product weight in a set - 43 kg. Packing size - 113x71x36 cm. Maximum engine power - 15 HP The boat comes with a standard set of accessories: Foot pump 7 l. 2 paddles with paddle holders in the oarlock. 2 hard seats. Packing bag. Repair kit and operation manual (passport). Design features: The transom and cans are made of special moisture-resistant plywood, which absolutely does not absorb moisture. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Colour Grey;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 1.3x0.71x0.36;
Carrying capacity 500;
Maximum motor power 15;
Passenger capacity 5;
Cockpit length 23,5;
Cockpit width 0,75;
Description Motorboat ALTAI A340 produced by TONAR Group of Companies with an inflatable low pressure bottom is intended for fishing, hunting and active recreation on the water. The boat was specially designed for operation on large rivers and reservoirs. The inflatable bottom increases the total air volume in the boat and, as a result, increases the buoyancy of the boat. Thanks to the modified design of the inflatable bottom and an increase in the deadweight, the germination rate on the wave improves, and the boat easily goes to planing, confidently holds the course and develops speed well. The overall thickness of the NDND has been increased, and therefore there is no need to pump the bottom to the maximum values. The stationary transom made of 25 mm thick moisture-resistant plywood is protected by a special U-shaped profile along the upper edge. The spoiler, located at the bottom of the boat bottom, not only stabilizes the water separation from the transom, preventing splashing behind the stern during planing of the boat, but also protects the bottom from damage. The increased diameter of the side (0.47 m) allows the operation of powerful and heavy engines. To protect the keel from cuts and abrasions, a PVC profile is installed on the boat, and the lower part of the boules is also protected by it. In the manufacture of the boat, a five-layer reinforced PVC material 1100g / m2 is used, as well as the best components on the market. The boat is supplied with a standard set of accessories: a 5L foot pump, 2 oars with paddle holders in the oarlock, 2 hard seats, bag for storage and transportation, repair kit and operation manual (passport). Characteristics of the boat ALTAI A340: Length overall - 340 cm. The largest width is 169 cm. Cockpit length - 235 cm. Cockpit width - 75 cm. The diameter of the balloon is 47 cm. The pressure in the cylinders / bottom is 0.24 kgf. The number of inflatable elements - 3 + 1; Loading capacity - 500 kg. Passenger capacity - 5 people. Product weight in a set - 43 kg. Packing size - 113x71x36 cm. Maximum engine power - 15 HP The boat comes with a standard set of accessories: Foot pump 7 l. 2 paddles with paddle holders in the oarlock. 2 hard seats. Packing bag. Repair kit and operation manual (passport). Design features: The transom and cans are made of special moisture-resistant plywood, which absolutely does not absorb moisture. The lyktros-likpaz system allows you to place them in the cockpit of the boat at your discretion. The boats made of polypropylene are fixed in reliable washers and provide maximum load when attaching an anchor rope and additional equipment to them. The boat is equipped with two rigid handles on the boat's boules and a handle-eye in the bow, which allow you to carry the boat without injuring your hand, as well as to tow the boat. In addition, there is a skipper handle that allows you to safely steer the boat. Folding aluminum oars with paddles made of durable plastic with an additional lock that allows you to install the oar on the oarlock. Oar holders are installed on the sides of the boat, which securely fix the oars during movement. Splash guards, located from the transom to the boules, prevent water from entering the cockpit. The special design of the flange allows not only to protect the boat from the sides during mooring, but also to fix the hooks of additional equipment, for example, bow and parking awnings. The drain valve will allow you to quickly drain water from the cockpit while driving.;
Colour White gray;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3+1;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 1.3x0.71x0.36;
Carrying capacity 500;
Maximum motor power 15;
Passenger capacity 5;
Cockpit length 23,5;
Cockpit width 0,75;
Description The boat ALTAI S360 was specially developed by the TONAR Group of Companies for operation on large rivers and reservoirs. Due to the increased deadweight, it holds the wave well, is easily controllable, quickly enters the speedboat and has high maneuverability. The boat has an increased cockpit capacity without losing its speed qualities. The increased diameter of the side allows the operation of powerful and heavy engines. Splash guard on transom included as standard.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour White;
Body material PVC;
Length 3,6;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3 + keel;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 113x71x36;
Packing size payol 106x67x15;
Carrying capacity 550;
Maximum motor power 15;
Passenger capacity 5;
Cockpit length 2,5;
Cockpit width 0,75;
Description The boat ALTAI S360 was specially developed by the TONAR Group of Companies for operation on large rivers and reservoirs. Due to the increased deadweight, it holds the wave well, is easily controllable, quickly enters the speedboat and has high maneuverability. The boat has an increased cockpit capacity without losing its speed qualities. The increased diameter of the side allows the operation of powerful and heavy engines. Splash guard on transom included as standard.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 3,6;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3 + keel;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 113x71x36;
Packing size payol 106x67x15;
Carrying capacity 550;
Maximum motor power 15;
Passenger capacity 5;
Cockpit length 2,5;
Cockpit width 0,75;
Description The boat ALTAI S360 was specially developed by the TONAR Group of Companies for operation on large rivers and reservoirs. Due to the increased deadweight, it holds the wave well, is easily controllable, quickly enters the speedboat and has high maneuverability. The boat has an increased cockpit capacity without losing its speed qualities. The increased diameter of the side allows the operation of powerful and heavy engines. Splash guard on transom included as standard.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Green;
Body material PVC;
Length 3,6;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3 + keel;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 113x71x36;
Packing size payol 106x67x15;
Carrying capacity 550;
Maximum motor power 15;
Passenger capacity 5;
Cockpit length 2,5;
Cockpit width 0,75;
Description Motorboat ALTAI S340 of the Rock Line series is a boat with additional armor of the bottom, cylinders and keel a special PVC profile, which will even more reliably protect the boat from various damages and prolong its life exploitation. The boat was specially designed for operation on large rivers and reservoirs. Due to the increased deadweight, it holds the wave well, is easily controllable, quickly enters the speedboat and has high maneuverability. The boat has an increased cockpit capacity without losing its speed qualities.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 3,4;
Brand name Altai;
Width 1,69;
Number of inflatable compartments 3 + keel;
Bead diameter 0,47;
Density of PVC balloon 1100;
Boat packing size 113x71x36;
Packing size payol 106x67x15;
Carrying capacity 500;
Maximum motor power 15;
Passenger capacity 5;
Density of PVC boat bottom 1200;
Cockpit length 2,35;
Cockpit width 0,75;
Description The high seaworthiness of the ALTAI 400 boat produced by the TONAR Group of Companies is ensured by the increased diameter of the cylinders, the shape of the bottom and keelson. The increased deadlift not only allows the wave to pass gently, but also provides almost instant access to the speedboat. The significant usable cockpit area and its large volume make it possible to comfortably accommodate a company of 5 fishermen for various types of fishing, both cast and trolling. The boat can also be used for outdoor activities and entertainment. Recommended sailing areas: bays, large lakes and rivers.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 4;
Brand name Altai;
Width 1,9;
Number of inflatable compartments 3 + keel;
Bead diameter 0,5;
Density of PVC balloon 1100;
Boat packing size 130x80x36;
Packing size payol 110x96x15;
Carrying capacity 700;
Maximum motor power 30;
Passenger capacity 5;
Density of PVC boat bottom 1200;
Cockpit length 3,02;
Cockpit width 0,9;
Description The high seaworthiness of the ALTAI 400 boat produced by the TONAR Group of Companies is ensured by the increased diameter of the cylinders, the shape of the bottom and keelson. The increased deadlift not only allows the wave to pass gently, but also provides almost instant access to the speedboat. The significant usable cockpit area and its large volume make it possible to comfortably accommodate a company of 5 fishermen for various types of fishing, both cast and trolling. The boat can also be used for outdoor activities and entertainment. Recommended sailing areas: bays, large lakes and rivers.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Green;
Body material PVC;
Length 4;
Brand name Altai;
Width 1,9;
Number of inflatable compartments 3 + keel;
Bead diameter 0,5;
Density of PVC balloon 1100;
Boat packing size 130x80x36;
Packing size payol 110x96x15;
Carrying capacity 700;
Maximum motor power 30;
Passenger capacity 5;
Density of PVC boat bottom 1200;
Cockpit length 3,02;
Cockpit width 0,9;
Description The boat Altai 380 JET (F) was developed by the TONAR Group of Companies for the use of engines with a water jet nozzle for mountain and shallow rivers and reservoirs. The inflatable low-pressure bottom is equipped with a waterway tunnel (depth 9 cm), which will help pass shallow areas without unloading the boat. The enlarged cockpit will allow you to place all the necessary equipment and supplies, and a large carrying capacity and capacity, in combination with compact packaging, make Altai inflatable boats the most convenient in operation and transportation. Thanks to the use of a bulwark (an additional inflatable balloon), the depth of the cockpit increases, and it also serves as an additional protection against splashes while driving. Variable cylinder diameters from 42 cm at the bow to 47 cm at the stern and improved geometry at the rear of the cylinders not only significantly improves the visibility necessary for maneuvering on shallow winding mountain rivers, but also speeds up the boat's entry into the mode planing.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Gray / White;
Body material PVC;
Length 3,8;
Brand name Altai;
Width 1,79;
Bead diameter 0,47;
Density of PVC balloon 1100;
Carrying capacity 650;
Maximum motor power 30;
Cockpit length 2,68;
Cockpit width 0,85;
Description The inflatable boat ALTAI 400 R-line is a 5-seater motor boat manufactured by the TONAR Group of Companies made of PVC fabric with a rigid flooring made of moisture-resistant plywood. Additional armor of the bottom, cylinders and keel with a special PVC profile even more reliably protects the boat from various damages, which will extend its service life. Recommended sailing areas: bays, large lakes and rivers.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Half-book (5 sections of rigid flooring) 1 pc. Stringer 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Grey;
Body material PVC;
Length 4,05;
Brand name Altai;
Width 1,9;
Number of inflatable compartments 3 + keel;
Bead diameter 0,5;
Density of PVC balloon 1100;
Boat packing size 130x75x31;
Packing size payol 110x96x15;
Carrying capacity 700;
Maximum motor power 30;
Passenger capacity 5;
Density of PVC boat bottom 1200;
Cockpit length 3,02;
Cockpit width 0,9;
Description When developing the design of the boat, such characteristics as the area of the usable space, the maximum load of the boat and the ease of operation were taken into account. The high seaworthiness of the boat is ensured by the increased diameter of the cylinders, the shape of the bottom and keelson. The increased deadlift and inflatable bottom not only allow the wave to pass gently, but also provide almost instant access to the speedboat. Recommended sailing areas: bays, large lakes and rivers. Characteristics of the boat ALTAI 400A produced by TONAR Group of Companies: Maximum length: 4.05 m. Maximum width: 1.90 m. Cockpit length: 3.02 m. Cockpit width: 0.90 m. Maximum cylinder diameter: 0.50 m. Weight of the item included: 58 kg. Carrying capacity: 700 kg. Passenger capacity: 5 people. Number of sealed compartments: 3 pcs. + keel. Transom type: stationary. Engine power: up to 30.0 HP Working pressure in the cylinder: 0.24 kgf / cm2. PVC fabric (five-layer): 1100/1200 g / m2. Packing dimensions: 130x80x36 cm. The boat is supplied with a standard set of accessories: Foot pump 7 l. 2 paddles with paddle holders in the oarlock. 2 hard seats. Packing bag. Repair kit and operation manual (passport). Design features: The inflatable low pressure bottom will provide ease of assembly, and is also an additional element of buoyancy and increases the safety of the boat, ensuring the unsinkability of the boat in case of breakdown of the side balloon. Reinforced rigidly glued transom made of moisture-resistant plywood (thickness - 35 mm) in conjunction with cylinders allows you to operate a boat with motors up to 30 hp. Interceptor located in the lower part of the boat's transom not only stabilizes the separation of water from the transom, preventing splashing behind the stern during planing of the boat, but also protects the lower end of the transom from damage. In the aft part of the boat, at the junction of the transom and the cylinders, there are splash guards installed, which additionally protect the cockpit from a passing wave and splashes from the running engine. The fastening of two cans to the cylinders on the boat is made according to the lyctro-liquefaction technology, thanks to which they can be freely adjusted along the length of the boat and allow passengers to sit comfortably. The drain valve, built into the transom, allows water to be removed while the boat is moving under the engine, which significantly increases the comfort during operation. For difficult operating conditions, the most vulnerable parts of the inflatable boat (keel, lower edge of the transom and the lower part of the boules) are protected by PVC profile protectors. A rib installed on the sides of the boat will protect the side when mooring. The conveniently positioned handles make it easy to carry these large boats when landing and launching. Leer belt made of durable polypropylene cord, located along the top of the board, ensures the safety of passengers during sharp maneuvers.;
Colour Grey;
Body material PVC;
Length 4;
Brand name Altai;
Width 1,9;
Number of inflatable compartments 3 + keel;
Bead diameter 0,5;
Density of PVC balloon 1100;
Boat packing size 1.3x0.8x0.36;
Carrying capacity 700;
Maximum motor power 30;
Passenger capacity 5;
Density of PVC boat bottom 1200;
Cockpit length 3,02;
Cockpit width 0,9;
Description The boat Altai 380 JET (F) was developed by the TONAR Group of Companies for the use of engines with a water jet nozzle for mountain and shallow rivers and reservoirs. The inflatable low-pressure bottom is equipped with a waterway tunnel (depth 9 cm), which will help pass shallow areas without unloading the boat. The enlarged cockpit will allow you to place all the necessary equipment and supplies, and a large carrying capacity and capacity, in combination with compact packaging, make Altai inflatable boats the most convenient in operation and transportation. Thanks to the use of a bulwark (an additional inflatable balloon), the depth of the cockpit increases, and it also serves as an additional protection against splashes while driving. Variable cylinder diameters from 42 cm at the bow to 47 cm at the stern and improved geometry at the rear of the cylinders not only significantly improves the visibility necessary for maneuvering on shallow winding mountain rivers, but also speeds up the boat's entry into the mode planing.;
Boat equipment Foot pump 7 l 1 pc. Paddles with paddle holders in the oarlock 2 pcs. Seat 2 pcs. Transport bag 1 pc. Repair kit 1 pc. Product passport and operation manual 1 pc.;
Colour Gray / White;
Body material PVC;
Length 3,8;
Brand name Altai;
Width 1,79;
Bead diameter 0,47+0,2;
Density of PVC balloon 1100;
Carrying capacity 650;
Maximum motor power 30;
Cockpit length 2,68;
Cockpit width 0,85;
