How to clean the seams between the tiles in the bathroom?

Tile is the most common coating for walls in the bathroom, kitchen and toilet. This is due to high quality characteristics, long life and incredible beauty, which can be created with the help of such material. The main disadvantage of tile coating is that, over time, the seams between the tiles darken.

Dark seams between tiles are a sign that dust, dirt or a fungus has formed in the gap between the base material. Today we will talk with you about such an urgent problem and learn how to clean the seams between the tiles in the bathroom.

to the contents ↑

Why do the seams between the tiles darken?

After laying the tile, the appearance is quite attractive. However, time passes and the seams between the tiles begin to darken, then even the most expensive and beautiful work will not please the eye. Darkening of the seams between the base material is a natural process that can not be prevented. Knowing certain rules and tips, you can eliminate this deficiency or reduce it several times.

Natural causes of staining of seams:

• increased humidity in the bathroom;
• the interaction of steam and chemical compounds in soap products evaporates into the air;
• in the kitchen the gap darkens due to drops of fat, food and debris that is inevitable in this part of the house;
• contamination of seams in the hallway is caused by the dust and dirt that we bring from the street on the shoes.

In addition to the above items, darkening of gaps between tiles can occur with unnatural causes associated with improper installation of tiles.

Technological reasons for the color change of the joint between the tiles:

• did not use a special primer during installation, which prevents the appearance of mold and fungus;
• powder for grouting joints was not additionally protected by a special liquid, therefore it quickly gets dirty;
• , before cleaning the gaps, the adhesive residues were not cleaned;
• indoors there is no ventilation or heating system is off;
• does not care for the tiled surface and there is simply dirt stuck between the seams.

In order to solve the problem as rarely as possible, how to clean your seams between the tiles in the bathroom, you need to regularly clean up these surfaces. Even the minimal amount of dust and dirt that formed in the gap between the tiles serves as an excellent breeding ground for the fungus. Especially it concerns working surfaces near a sink, a washstand and in a bathroom.

Important! It is recommended to wipe the surfaces once every few days against soiling and soapy water. It will not take you more than ten minutes, but you will be less likely to encounter the problem of stitching.

to the contents ↑

Clearing the gaps between the tiles on the floor

During cleaning, each landlady pays the main attention to the surface, but do not pay attention to the seams between the tiles. However, this is not entirely correct, since after several such cleaning, you will notice a darkening of the gaps between the tiles and immediately you will have a question, how to clean the seams between the tiles in the bathroom? Below we give you some tips for each part of the house.

We remove the floor in the bathroom

To clean the dirt and dust on the floor in the bathroom, you will need to use an ordinary soap solution and a toothbrush. Of course, you can use other - chlorine, antibacterial, funds that will allow you to cope with this shortcoming.

Important! If you have mold or fungus on the floor, then you will need to release the seams from the old grout and apply a new one. Preliminary it is necessary to primer all surfaces. With this simple method you will protect your gender from the appearance of this shortcoming and as less as possible will think about how to wipe the seams between the tiles in the bathroom

My seams on the floor in the kitchen

Cleaning the inter-part joints in the bathroom takes much less time and effort than in the kitchen. This is due to the fact that the kitchen is a more aggressive environment than the

bathroom. Here, most often the remains of food fall, spreading soot and fat.

To eliminate dirt in the gaps between the tiles, it is recommended to use a hard-nosed brush and special tools. To do this, you will need chlorine-containing or antibacterial liquids containing special substances. If you do not have it, then the soap solution can also cope with this problem. But you have to act more long and intensely.

We clean in the toilet

If you compare cleaning in the toilet and cleaning the interlacing seams in the bathroom, then you will not have much time and energy to clean the bathroom. This is due to the fact that the least amount of pollution we bring to this part of the house. There is no aggressive environment and we do not spend much time there.

In order to clean the gaps between the tiles in the toilet, you need to have a soapy solution and a sponge. Literally in five minutes you will be able to clean the entire surface that is needed.

Important! After the installation of tiles it is very important to see that the remnants of the glue are removed, since the dirt will appear in this place very quickly, and removing these "spots" will be problematic. In order to eliminate this drawback, you will need to:

• remove the entire grout;
• clean the interlit seams from the old adhesive layer using sandpaper or a special tool;
• re-apply the grout.

Only then you can get rid of the darkening of these places.

to the contents ↑

Ways of cleaning interlacing seams from contaminants

There are several methods for deciding how to clean joints between tiles in a bathroom. It is chemical, folk and mechanical. Let's take a closer look at each of them.

Chemical method

As it is not difficult to guess by the name of this chapter, the chemical method is to use a product that contains various chemicals. The modern market provides a huge variety of different means to combat this shortcoming. It is enough to go to any hardware store - you will be offered at once 5-6 trademarks in the fight against dirt and mold, which is present in the gaps between ceramic products.

When choosing a product based on chemicals, it is worth paying attention to the environment in which you can apply, and the composition. So:

• For the bathroom, get liquids that contain bleach or bleach.
• For the kitchen - prefer alkaline solution or oxygen bleach.

All these products, regardless of destination, are sold in the form of sprays, powders and liquids.

Important! On sale there is also a special pencil, which is able to repair the shortcomings of the seams. However, in terms of its qualitative characteristics, it does not occupy a high position, since it is not able to cope even with an average degree of contamination. It is more used to eliminate small specks, rather than for mold and fungus.

Mechanical method

Mechanical methods include abrasive substances and powders, which need to clean interliter seams in the bathroom. To perform this action, you will need a piece of sandpaper or a flexible polishing wheel. With the help of these two tools, you can clean the gap by removing the layer of grout, which is affected by the mold or fungus.

to content ↑

Popular ways to fight mold and other contaminants in the joints between

tile Let's look at a few options that have proved to be the best improvised tools in fighting mold and polluting tile clearances.

Using soda and hydrogen peroxide

The first way is to use soda and hydrogen peroxide. To perform this action, you need:

1. Take 50 ml of hydroperite, ¾ cup of ordinary baking soda.
2. All this mixed with one tablespoon of any dishwashing detergent.
3. Apply on the gaps between the tiles with a brush. You can not even rub it.
4. Leaving this remedy for 15 minutes.
5. After that, having cleared it, you will see that all the seams have become snow-white.

Mixture of vinegar and soda

The second method involves the use of soda, vinegar and water in two stages:

1. In the first stage, you need to mix three parts of soda and one part of the water. After that, you apply with the help of a brush with a rigid nap this means on the gaps between ceramic products.
2. In the second step, you mix vinegar with water in equal parts, pour into a spray gun and spray onto the first layer. Leave for 10-15 minutes. At the end of this time you will see that soda and vinegar have done their work and cleared all the gaps.

Citric acid and soda

To create this folk remedy, you will need:

• 200 ml of water;
• ⅓ a glass of lemon ordinary acid;
• 100 ml of vinegar;
• ½ cup of baking soda.

To clean the interlacing seams in the bathroom, mix all these ingredients, rub into the gaps and leave for 20-30 minutes. After that, simply wipe the place with acid with water.

Important! This tool perfectly copes with dirt, soap divorce and rust.

to the contents ↑

Tips for the cleanliness of the joints

In order to think as little as possible about how to clean the seams between the tiles in the bathroom, you must follow certain rules and advice. Despite the fact that the tile material is the most durable, reliable and durable, it is worthwhile to look after it regularly and do not forget about the gaps between the elements of monolithic coating.

Tips for tile:

• If your tile covering has a glossy texture, then you should abandon various abrasive substances, brushes with a metal or hard pile.
• Some acid-containing substances adversely affect ceramic products. That's why you first need to try the product on an invisible site, and only then apply to the entire surface of the
• . Wash the tile is specially designed means that eliminate dust, dirt, limescale and mold of a small degree.
• For the care of matte surfaces made of ceramics it is worthwhile to acquire special gel-like agents that favorably influence the surface, while giving it greater shine.

Adhering to our advice and knowing how to clean the seams between the tiles in the bathroom, your ceramic surface will always shine and have perfect purity! Accordingly - is in the kitchen or bath will be much nicer, and the feeling of comfort in your home - stable.