Laying tiles, in principle, is not an easy task, but diagonally - and even baffles many. Meanwhile, it is precisely this arrangement that looks especially impressive and allows you to break the space, expanding the boundaries and pushing the walls apart. Those who decide to do this for the first time and with their own hands should familiarize themselves with simple recommendations that will greatly simplify the work.
Read in the article
- 1 Why diagonally?
- 2 The nuances of marking and calculations for diagonal masonry
- 3 Preparing the substrate for diagonal tiling
Why diagonally?
It is expensive to order diagonal tiling. It seems that the tiles are the same, and all the materials, and the floor or wall are no different, but more expensive. And not at all because it is much more difficult to do it. And simply because of the unusual request. The costs are mostly waiting for the owner because tile trims are difficult to use somewhere and there will be more of them than usual.
So why is it worth starting this type of masonry? Are there other reasons other than the striking look of the diagonal layout? The most important advantage is an excellent opportunity to divert attention from the flaws in the geometry of the room. Uneven walls, lack of parallels - all this can be skillfully hidden behind the diagonal layout. And even if you doubt your abilities, keep in mind that the flaws in laying tiles in a diagonal arrangement are almost invisible.
The nuances of marking and calculations for diagonal masonry
For diagonal tiling, you need to draw up a drawing. If this is not necessary for simple installation, then for this option a beginner cannot do without a drawing.
It is very simple to make a diagram: draw a diagonal layout on a scale, then transfer the dimensions of the room to tracing paper and combine the two drawings, choosing the places for cutting the tiles as economically as possible. Fix this scheme and just make the calculation taking into account this alignment.
When calculating the material consumption, take into account that if the tile is not cut exactly in half, then it counts as one. Plus, when calculating, you should definitely add about 20 percent of the total amount of material in case of failure during pruning, transportation and for subsequent repairs.
A little advice: when you buy tiles, immediately agree in the store about the possible return of marriage and surplus material. Most large retail outlets agree to such agreements.
And one more small nuance that may not be known to a beginner: the heavier and thicker the tile, the greater the consumption of glue and grout material. Take this into account.
Preparing the substrate for diagonal tiling
Of course, the base for laying must be perfectly flat. To do this, remove the old coating, fill in all cracks and defects and grind the wall.
It is better to use a cord for marking. Marking can be made from corners or from the center of the surface. It is more convenient to mark from the corner in a small area, if you are not going to use tiles of different colors. When marking from the center, first determine the center point of the surface and then beat off the diagonal lines that will divide the right angles in half. In this case, the first tile is placed in the center of the intersection of the marking lines.
Masonry from the center is more convenient and simpler, but you need to prepare for the fact that as you approach the edges you you will have to adjust your initial cutting plans, so take your time to cut the tiles in advance.
Practicing the styling process in this short video:
In any laying of tiles, ordinary or diagonal, leisurely diligence and accuracy are the key to success. And the devil is not so terrible as they say, as he is painted. So diagonal styling is quite within the power of a novice home craftsman - there would be a desire. And let the thought warm you that you will save significant money if you decide to do it yourself.
Have you ever laid tiles diagonally? Share your experience in the comments!
extremely understandable. Russophobe.
and should be impressed or not by the attitude to their country and their people.
Roma, when I meet the likes of you, I think, it seems that he gets smarter to read and use inte ...
It is necessary to mount with hands that do not grow out of the ass. So that the pipes do not bend from the spacing ...
Such a sophisticated lock that one can immediately understand the arrogant character of a person who wants to b ...
if the author has the opportunity to cut off his bar exactly at forty-five, why is this ...
speaks a lot, but not understand what it is about... an interpreter is needed for his manner of speaking ...
Mania of genius. And in fact, he only needs babos. Zhirik in a crooked mirror.
Whatever it is, our civil servants with a billion look much more disgusting ...
Adheres to the principle of reasonable sufficiency, but the apartment is not impressive.
Stripping the aluminum layer is applicable when the aluminum layer is close to the outer poly ...
The compensatory "donut" should be on every floor, and not just at the neighbor's. As …
No one is eternal. Lafa will end anyway.
All the same, no one is eternal.
A muddy personality. Between the dismembered Sokolov and the muddunk Solovyov.