How to get rid of a creaky bed in 5 minutes

Squeaky sofa or bed Is a serious problem that gets on your nerves and prevents you from getting a good night's sleep. If you are already seriously thinking about buying a new bed, do not rush to make a final decision. In fact, you can get rid of the squeak, and it will not be difficult at all. First, get your pliers and lubricating oil ready, and we'll go over the types of squeak and how to get rid of it.

How to eliminate the creak of a metal frame

If your bed or sofa has a metal frame, then parts of it may begin to creak due to loosening. Any backlash will inevitably produce unpleasant sounds if parts are under stress.

PHOTO: son-divan.ru

How to do it: First remove the trim to get to the squeaky spot, and then lubricate all joints. The best option is a silicone-based liquid lubricant in the form of a spray. This will take you to the most inaccessible places.

Retighten all bolts after lubrication. This can be done with pliers or a wrench if you have a tool of the right size. To determine the degree of tightening required, pay attention to the risks marked on the metal frame.

In addition to metal parts, the plastic parts that come into contact with the metal should be sprayed with grease. Remove excess grease with a soft cloth. All that remains is to assemble the trim and enjoy a restful sleep.

Wooden frame creak: how to get rid of it

Upholstered furniture may well have a wooden frame. If the connections in it are fixed with glue, it should not creak, since the connection area is large and PVA perfectly fixes the tree. But if screws and metal corners were used for fastening, a creak will appear unambiguously. It is possible to tighten the screws, but this will be a solution for a short time. Replacing screws with bolts will be more effective.

PHOTO: sovkusom.ru

Another reason for the skip of the timber frame is a crack in the beam. This is usually due to desiccation. wood. It is necessary either to replace this part of the frame, or, if this is problematic, to repair the beam by tightening it with bolts or reinforcing it with pieces of plywood with PVA glue.

Drying of the wooden frame can be prevented by generously lubricating the parts with glycerine grease. You need to wait until the glycerin is absorbed, and then assemble the skin. Such a procedure will help restore even a very dry base. But remember that only glycerin is suitable for this purpose - no other lubricant is suitable.

What to do if springs creak

Spring blocks are divided into two types: independent and dependent. Independents, in principle, do not creak, unless they completely rust. But the dependent construction begins to creak after a couple of months.

PHOTO: hoyz.ru

Getting rid of the squeak in the dependent block is the hardest part, but it can be done. You will need to remove the casing and lay a foam pad between the base and the spring block. If some of the springs are deformed, they need to be corrected by bending them with pliers. Pay attention to the ties that connect the springs - they should also be tightened. Between the springs it is necessary to put foam rubber or synthetic winterizer, but so as not to interfere with them being pressed under load. All these manipulations should eliminate the creak, but it is better to check everything before returning the skin to its place.

Sometimes the springs need serious repairs. How to do it - in this video:

As you can see, getting rid of the squeak is not that difficult. Just a few minutes - and you can toss and turn on your bed without the risk of waking everyone at home. The main thing is to find the place of the squeak and handle it correctly.

Have you ever had to solve such a problem? Share your experience in the comments!