Decorating the bathroom plastic panels 100 photos and instructions

Plastic panels - a great choice for a budget repair bathrooms. This material is presented to a wide variety of colors, textures and prints, and externally looks quite presentable. The main plus finishing the toilet plastic panels - the ability to get a nice room with a small investment. In addition, the material is easy to install and allows you to save on the services of a specialist. If desired, the process of lining it is possible to perform with his own hands.

Advantages and disadvantages of PVC panels

The plastic panel has the shape of an elongated rectangle. It consists of two sheets of PVC, coupled webs, which also act as stiffening ribs. Due to this, the void formed within the panel, which provides it with light weight. Thanks to this material is easy to transport and install. But this is not its only advantage, in addition can be identified such as:

• an extensive range of applications. In addition to direct destination - the walls and ceiling panels are actively using to create window slopes, screens for the bath, as formwork for non-standard steps - what fancy enough master;
• many color options, designs, patterns and textures. If desired, you can apply any image using photo printing for a specific order. The possibilities are endless panel design;
• easy maintenance - smooth surface is easily cleaned with a damp cloth. If necessary, you can use dishwashing detergent. The only difficulty - cleaning joints. But if you have purchased a high-quality seamless panels, this problem will not affect you.

Disadvantages:

• low resistance to UV - eventually plastic material may turn yellow;
• poor resistance to mechanical stress - pierce and penetrate the lining is very simple;
• during combustion of the material evolves toxic substance.

variety of material

Plastic panels are different in several ways:

• depending on their application. Manufactures products for walls and ceilings. Wall slats are more durable, so it is resistant to shocks. Furthermore, they are less flexible than the ceiling analogues, which is very important, because after mounting in the vertical position may lead lining. The fact that their manufacture uses thicker and hard plastic. The thickness of the ribs in such a product approaches 1 mm, which also affects an increase in the stability of the material;
• size - the width of the plastic can be 125, 250 or 380 mm. The optimum average, but with wide slats to work much more convenient. panels length often ranges from 2.4 to 3m. The thickness of the product to a ceiling can be from 6 - 10 mm and the wall - from 10 to 12 mm. If desired set point on the ceiling panel lighting is preferable to choose a thickness greater than 8 mm. Thinner will show through and through them will be visible crate;
• in texture - laminated or simple. The former are more resistant to damage and dirt. It is provided with a protective film. This material belongs to the highest class, most of it can be purchased only in the decoration studios. In terms of durability may well compete with the tile.

Tips and advice on choosing

When choosing plastic panels should first pay attention to the composition of products. Material for qualitative lamellae contains chlorine, hydrogen, and carbon. Sometimes part of the associated lead, performs the stabilizing function. Such panels during the fire with a large heat is not recovered in the air toxics.

Recommend purchasing panels from hard plastic - they are deprived of the ability to ignite, in addition, They have excellent soundproofing characteristics and high resistance to temperature.

Visual inspection will give enough information about the quality of the material. Inspect slats on the subject:

• uniformity of dyeing;
• the presence of black spots on the surface;
• of equal width;
• Zero Defects - surges, waves, chipped, uneven;
• locks integrity.

If you choose a product in the online store, and you can not view it on their own, get their information from the reviews of customers of the company.

To test the strength of the material, press down on the plastic. If there was only a small dent, satisfactory quality panels. Significant deformation and the cracks indicate that such panels do not possess sufficient strength and will last long.

Compliance with style and design

In choosing the material for finishing the bathrooms need to take into account the general stylistic direction of the house or apartment. plastic will look alien in the classical interiors. The same can be said about the country, the Art Deco Provence. In these styles is better to use a plaster, natural wood or tile. But in the modern style - minimalism, modern, high-tech plastic is quite acceptable, and is used very actively.

The design of the slats - a wide color palette, a variety of patterns and images, including 3D, imitation tile, stone, natural wood, mosaics - offers a vast field for the realization of the most creative design ideas. Modern manufacturers try to take into account all the latest trends of interior art.

Color variety of panels

If monochrome lining seems boring to you, you can add additional colors to the interior. They can be as close and differ only in saturation and color depth and contrast. Always advantageous to look a combination of representatives of the bright palette of calm tones neutral range - white, gray, sand, black, beige. It looks great silver mirror or blotches.

Past everything else and have a purely practical use. The skillful combination of colors allows you to visually adjust the shape and size of the premises. Narrow walls will look wider if you put plastic contrasting horizontal stripes, dark walls, decorated with white accessories, visually "retreat" back and add an apartment sanitary volume. At the same time lighter shades visually increase the room.

Receiving shades combination can be used not only for wall decoration, but also to isolate individual zones. You can select a zone with a toilet, sink or shower hygienic.

Combinations of colors are appropriate in any style. The main thing - to choose the right color, which is destined to become companions. For example, such:

• blue - looks great next to a white, black, blue, turquoise - this is the perfect design for a toilet in a Mediterranean style;
• Brown - combines well with yellow, sand, beige - these colors are characteristic of classical decoration;
• red shades can emphasize the white, black or cream colors. Such combinations are suitable for modern styles - high-tech, pop art;
• Metallic - a shade of gray in combination with any shades ideal for the minimalist and loft;
• green - combined with gold and brown colors suitable for styles that are attracted to nature.

The combination of multiple colors can be arranged in a checkerboard pattern, outline the geometric shapes, diagonal - the possibilities for experimentation are extremely wide. Options bathrooms design with panels of different colors are shown in the photo.

Calculating the number of

In order to properly determine the amount of materials needed, measure the room and the walls define an area that you want to oblitsevat. This number should be divided into one area of ​​the slats. So we know the required amount of material. But such a calculation is a rough, more accurate results can be obtained if we make the same operation for each wall separately. Do not forget to subtract the area of ​​the door opening, and a window if necessary.

The resulting number should be rounded up and add to the result of 10-15%. Margin will pruning, accidental damage and the possible need for replacement.

mounting options

When installing panels using two methods. Elements of fix or glue, or on the crate. Let us consider each of these methods in detail.

Using adhesive

The easiest way, which take the minimum amount of time and effort - stick panels with liquid nails. In this case, the material is fixed directly to the wall, saving maximum space. And this is a significant bonus for such a small room as the toilet. The only condition - the base must be as smooth. Permitted irregularities up to 5 mm. Otherwise, to achieve full adhesion to the wall it will be impossible. Lamella in this place will cave in and very quickly come unstuck.

Choosing a similar technology, you need to take into account the climate in the room. Excessive moisture will inevitably lead to the emergence of the fungus. Due to the constant contact with the wall condensation will form under the plastic, which simply can not evaporate due to the waterproof material.

This method has another drawback. In the subsequent repair of the lining will be very difficult to remove from the wall.

If you have straight walls and you do not plan in the near future to change the finish, the method of installation of panels with glue will be the best choice for you.

installation process is carried out in several stages.

1. Cooking ground. Clean the wall of dirt, dust, adhesive residues, old wallpaper, fatty spots.
2. Apply the adhesive composition of the stripes on the back of the product.
3. Putting a panel on the right section of the wall, firmly but gently press it and hold a few seconds.

Choose adhesive compositions which provide maximum adhesion of a base to furnish material. The best choice would be the sealant "liquid nails".

With crate

If the toilet uneven walls, it is necessary first to prepare the frame-crate, and have it be fixed panel using screws, or staples klyaymerov.

As a material suitable for the frame timbers or metal profile. The first option is more convenient, since it is well withstands any fasteners which are used for mounting the slats. While only screws suitable for plating a metal profile.

furring elements need to be fixed at a distance of 35-40 cm. They are fixed with dowels or screws - depending on what is selected for this material.

Next, mount the panel on the frame. This can be done through:

• small studs - driven into the groove under the tongue of Technology. The disadvantage of this method is complicated and the risk of damage to dismantle the sipe hammer;
• Professional stapler staples. Fast and convenient way - but it will only fit if the crate is made of wood;
• clamps - fastening elements in the form of clips, securely locking the panel even in the new building, which is to shrink;
• screws - suitable for every frame.

After the material for the crates and sewings is selected, you can proceed to the installation, which is carried out in several stages:

• install the rack on the wall;
• mount fittings for processing external and internal corners, the finishing elements;
• We set the panel, inserting each of them into the mounting groove narrower shelf, after which is fixed to the lath via the wide flange;
• the final panel is placed between the previous and the final module with little effort.

The panels should be installed vertically and the most tightly, preventing distortion.

Step by step instructions finishing the toilet with their own hands

Before attempting to install the panels, read the step by step directions.

Materials and tools

For finishing the toilet with plastic panels have to be reserved:

• material for the frame - it is desirable to give preference to rail or metal sheets with a section of 20x50 mm. Slim profile allows for maximum space saving toilet or shared bathrooms. Counting the number of strips you need to take into account the ceiling frame and a decorative box, masking the pipe;
• dowels for fixing the profile bar or - valve must be long enough to enter the walls 50-60 mm. The number of fasteners is determined depending on the frame size with the step in which they are located;
• screws for wood or metal 15-20 mm or a small cloves or staple gun with staples 10-12 mm;
• sealant "Liquid nails", or tile adhesive - in the case of smooth walls;
• means for processing wooden construction parts from decay and insects;
• primer for processing the ceiling and walls - strengthens the substrate strength, improves adhesion of the adhesive to the wall. If you select part with antiseptic properties, it is possible to reduce the possibility of formation of fungus.

Toolbox varies depending on the method of installation and may consist of:

• perforating or electric drill;
• drills for wood or concrete;
• screwdriver;
• or jigsaw blade;
• a hammer;
• Scissors on metal;
• Construction of the knife;
• roulette and gon;
• pencil or marker;
• level with the pointer vertically and horizontally;
• staple gun;
• spatulas, roller, brush, construction dryer.

Preparing walls

Before starting the installation, you need to prepare the ground. With the wall surface is completely removed the old finish. After that, the wall must be clean and treat the antiseptic to prevent fungus. Then you need to fill in all the bumps and cracks with plaster or plaster and wait for drying material. If selected panels fit technology on the glue, you need to align the walls with plaster or drywall. For toilet expedient first method, since the frame together with the GCR "eat" fair amount of space. Before pasting on the wall - plastered or mounted plasterboard should be primed.

installation of lath

If you do not mind the loss of usable area, choose the method of attachment to the crate. This will provide an opportunity to hide unsightly communication and complement the design of facing the "pie" of heat and waterproofing materials. If the toilet is combined with a bath, indoor humidity is increased. Therefore, choose the best to create a frame of metal or plastic profiles. If you do decide to stop the election on a tree, cut the surface of the moisture barrier, antiseptic and fire compositions and finally - their color.

Installation steps:

1. We carry out the markup. The last rail - top and bottom will be located at a distance of 6-7 cm from the floor and ceiling. Ceiling mark up similarly. The carrier rail must be installed perpendicular lamellas, which can be positioned vertically, horizontally or diagonally. Step is 40-50 cm.
2. Mount frame using screws or dowels.
3. Wiring perform and display it in the planned location.
4. The frame intervals can put a heater.
5. We produce boxes in order to hide the pipe.
6. Mount the vapor barrier membrane.
7. Cut the panels and moldings according to the height of the room. During installation, prune and customize additional elements.

Mounting panels

Crate ready and it's time to start the installation of decorative panels. She performed in several steps:

• angular set and lateral moldings;
• fasten the start profile in the far corner of the front door;
• Plant in narrow sipe has a first shelf insert element starting from the lower corner;
• fix the panel by suitable fasteners - klyaymerov, staples, screws, observing step, able to provide rigidity;
• subsequent panels are installed the same way. During installation it must be ensured a perfect seal - joints should not be evident;
• windows and doors frame the starting corners;
• fasten the skirting boards that zadekoriruyut gap and give completeness of the external appearance of the room.

When installing panels suture manner or if the joints become visible due to uneven walls, the joints must be sealed with silicone.

Features panel installation on the ceiling

Get acquainted with the specifics of PVC panels mounted on the ceiling. The first and most fundamental, what will have to decide - the distance between the lining and the ceiling. When deciding, consider the type of lighting fixtures, which are to be installed. If the built-in lights, leave at least 10-15 cm. For paneled space is formed, which will hide all the wiring. location spotlights should be noted in pencil. After that, cut out the hole and install the sockets of fixtures.

Combining PVC panels with other surfacing materials

Another advantage of the plastic panels in their ability to be in harmony with other groups of finishing materials - paint, wallpaper, tiles, MDF panels, plaster. This material offers unlimited possibilities in the field of design in terms of the creation of various, sometimes unexpected combinations. The most common example for the toilet - where the lower part of the wall is covered with tiles and the top is decorated with plastic plates. Another option - the panel at the bottom and the top is plastered. The boundary between the materials can close the molding of polyurethane.

Caring for the paneled

How to properly care for the panels, which means you can use any form of cleaning may be used, depending on your veneer species. The panels are:

• laminated;
• simple.

Both of these materials are ideal for finishing the toilet. Keep in mind that the material without the laminated layer is better to absorb dirt and stains that can not be removed later. Therefore, get rid of the new contaminants should be as soon as they become available.

Clean the surface not having the protective film should be "dry", i.e. "dry" method. Use a vacuum cleaner or a dry cloth. If the stain could not remove, soak a cloth and treat pollution again.

Strongly rubbing surfaces exposed laminate should not be. Abrasions, may not be highly visible, but as soon as they get dirty, they immediately manifest.

Laminate coating are cleaned in the same way. However, the presence of the protective layer makes it possible to apply a large force to launder plastic. Grease stains, dried blots and stains can be rubbed away at any time, even if it's been a long time. You can use non-corrosive and non-abrasive detergent, if necessary. Avoid chlorine-containing compounds, as they can cause irreparable harm to the color panel. Allowed to use a homemade soap solution, dishwashing detergent, pulp prepared from water and baking soda - is applied to the spot for a few hours, then washed with warm water.

Care for the panels can be and with the help of the cleaning chemicals from the store. This may be as a solution, and aerosol.

conclusion

Installation of plastic panels with their own hands does not require much effort, with impressive results are guaranteed. Just a few hours you get a low-cost but highly spectacular water-resistant lining, which can rightly be proud of.

For more information about installing PVC panels look at the video.