How to clean the hood in the kitchen of fat: the methods of internal and external care

Why do I need to clean the kitchen hood and the regularity of the procedure

The ventilation hood must be present in every home kitchen. Fasten it over a gas or electric stove. The apparatus has an important function in the room, drawing off noxious fumes and odors from cooking outside.

However, that device is working properly for a long time, it is necessary to monitor its cleanliness. Regularly wash filters, grilles, control elements and the body of fat and oil droplets. Unfortunately, modern women do not always have time for this, so they are faced with a problem when trying to clean up the kitchen hood. This is because the filters and the blades of the engine accumulates a large layer of fat for a long time, at which the dust settle. Such contamination is eliminated hard, it is recommended to thoroughly wash all the components of the appliance twice a month.

Preparatory work before removing the dirt on home extracts

Before you start to become a handling device and the cleaning of its parts, be sure to continue reading this article until the end, because you have a clear idea of ​​what the event should run, and take into account the errors that may result in pitiable. Returning to the preparatory process:

1. Prepare the necessary funds himself appliance into contact with water. To do this, be sure to unplug it from the outlet. Remove the components that are attached mechanically (decorative glass, grilles, knobs).
2. The pipe exiting through the wall on the street, too, requires treatment, remove it according to the instructions to the device. If the self does not work, ask a family member or contact the webmaster.
3. Removing the air filter, it also needs to be cleaned. If it is, detach parts, remove them, but remember the sequence of actions for the further installation.
4. hood housing do not try to pull out of the wall, it can be cleaned on the spot with soap, degreasing agents or national recipes, but more on that below.
5. Decide on the degree of contamination of the domestic appliance and select the desired method for eliminating fatty plaque. Perhaps you will help ordinary soap and water solution, or save the use of household chemicals.

Housekeeping tip!(Click to see)

Ways to clean up the hood in the kitchen grease and dust buildup

It would seem that the fat - is a hardy material, which can be deleted only by means of chemicals. However, successfully showed themselves and the means of the people, which were used even by our grandmothers for cleaning utensils.

Remove mild to moderate pollution: how to quickly clean the grille hood of fat

Weak pollution on the extracts can be determined by light droplets of oil and grease. They indicate that the substance had not yet congeal therefore be able to clean up the bars in a few simple steps, and after 1 hour you can again use the technique:

1. We take out the grid and from the device filters and put them in a container where they are completely submerged. If there is a large cup, use a bath, but it will need to carefully clean out the plaque residues.
2. Fill grilles and other removable parts of hot water and add liquid soap or dishwashing detergent (perfectly cope with such dirt Ferry). Well agitated liquid to a foam.
3. Take a metal brush average roughness and we clean each hole grids on both sides. If there is too narrow holes, use a cotton swab or needle.
4. Leave elements in water for 60 minutes, then rinse in room temperature water. Make sure that all traces of foam and soap to remove and dry the part.

Use soda solution and ammonia - effective "cure" for filters

That by this method was the effect, you must be sure to boil all grilles and exhaust filters from the fact that you will fill with hot water, the result is unlikely to be achieved. We immerse our grid in a metal bowl and fill it with water so that it covers the full details. Then pour a handful of baking soda and put it on an open fire. Wait for until the vehicle comes to a boil, and diminish fire, subject to languish for 30 minutes. Then all well laundered sponge, rinsed and dried.

Ammonia as addition to soda solution

If one procedure you are unable to clean exhaust parts from flying dirt, do not immediately run for the chemicals. The problem will help to cope ammonia. To this dilute alcohol in 0.5 l 3.5 l cold water. Then, well promachivaya all parts with a cloth hood, treat both sides. Leave in the water for 1.5-2 hours, after remove the remnants of dirt with a sponge and rinse under running water filters. Dried items can be put in place.

NOTE! (Click to see)

As wash filters kitchen hoods of fatty plaque using soap, vinegar and citric acid

Cope with fat bloom on lattices of household hoods to help three other people's money.

For those who lose heart: how to remove stubborn dirt on the hood

If you are unable to remove the blockage in any of these ways, then you have to use more serious means for removing stale fat. In this case, you need to acquire professional chemicals, coping with a long tube is clogged.

These formulations are sold in the form of a gel, granules or powder. Carefully examining the instructions in the selected substance, process removable hood panel and leave for several hours for effective removal. After a warm pressure of the water, remove the remnants of fat and dirty plaque using rigid side sponges.

Household chemicals for cleaning fat and plaque in extracts

If any contamination on the extractor hood, you can splurge and buy special detergents. They perfectly remove residues of grease and splashes of cooking. Such drugs can act as a powder or liquid formulations.

GOOD TO KNOW!(Click to see)

Overview of household chemicals: the efficient wash cutlery

Not always, "his grandmother's" recipes can help to effectively cope with the pollution. In this case, you should pay attention to industrial cleaning agents.

processing technology lattices drawing two means: a comparative analysis

This experiment was conducted revision Tehno.guruTo show readers real effective agent for treatment of large accumulations of fat.

Illustration	Description of the action
We take out grille with the hood and process a variety of means.
	Apply liberally funds for both the grid and leave for 15-30 minutes.
To the left of the lattice using a conventional children's gel for dishes, and the right caused lemon juice.
	When the time to start to clean the grid drawing mechanically. Using a metal brush or scraper.
You rinse both parts under running water so as not to leave coked particles of dirt.

As a result, we see that to deal effectively with this type of pollution baby dishwashing detergent "Eared nannies." According to experts, any composition with a degreasing formula will cope with such tasks much faster than people's ways.

How to wash the hood in the kitchen of the fat with the help of the steam machine or dishwasher

To clean the hood and its components of a deposit, you will have to remove them from the cap, then put into a container of the dishwasher. Then load the detergent: in this case will be effective Finish tablets. They not only cope with a thick layer of fat, but also eliminates the bad smell.

If your house has a steam generator, it is sufficient to remove the parts of the appliance and place it in the bathroom. Next, you need to handle a flood of steam grid. Then enough wash detergent and a sponge, and then rinsed in cold water.

The wash hood of fat on the outside: the rules for housing care

In addition to its regular wipe (about once a week or at the same time, how many times the dust in the house), you must More consider some tips that will help keep the operation of the kitchen appliance and attractive look much longer. Consider the experts' advice:

1. Do not apply with respect to the hood kitchen hood aggressive chemical compounds. For example, if your body household appliance enamel or stainless steel, it can oxidize and cause corrosion.
2. Should not be left damp after rubbing the hood, since it is connected to electricity can power breakdown, it is very unsafe.
3. If some part of the body (buttons, levers and switches) can not be removed, they should be cleaned with a soft cloth dampened with a detergent solution. In no case do not use knives, brushes, metal and other sharp objects. This would entail damage to the body structure.
4. Required wipe dust from the hoods on the outside and on the duct. This will protect the device from unnecessary accumulation of dirt (unhygienic kitchen) and prevent a short circuit (which so often is a simple dust).
5. If you experience for integrity and an attractive appearance of his hood, read the instructions than it can handle. Otherwise, use a microfiber wash in economic soap.

Dear readers of our site, waiting for you to review and comment on this article. We always welcome feedback and are ready to discuss the questions.