Washing machine does not drain: what to do, the reasons, the options to solve the problem

Why is the washing machine does not drain: the main reasons

Often, the user himself is to blame for the fact that the washing machine does not drain the water, and the technique has nothing to do with it. For example, incorrectly selected program, with the machine will not drain, not to be crumpled linen. Before you suspect damage, it is necessary to start small and reread the instructions. If confirmed improperly installed programs, it is necessary to set the desired and restart the wash cycle. It is not uncommon kink the drain hose - This option is also worth checking out. Possible blockage of the hose, siphon or sewage system.

GOOD TO KNOW!(Click to see)

If the above problems have not been confirmed, it means that a fault in the machine. The typewriter machine can not drain water because:

• clogging of the filter installed on the drain;
• failure of the pump;
• failure programmer control module software failure;
• failure of the water level sensor (pressure switch).

Let's try to understand how it is possible to determine the cause of the failure.

Washing machine does not drain: determines the cause on the basis of

If there is no discharge can be observed two variants of the "behavior" of the unit - the water is drained until the end, or not at all is not discharged, but the machine is buzzing, as if producing plums. We will understand that it becomes the root cause of this.

The water is drained, but not to the end: the options to correct the situation

The reasons for this failure a few. Let's try to list them:

1. Clogged filter element. Often remain in the pockets of coins, pieces of paper that fall out when washing. Small pieces of tissue can also get into the filter. This problem is solved simply - unscrew the filter plug (usually at the bottom right), and clean element.
   

   Prepare capacity - from the opening to the filter is required to water will flow

2. Clogged drain hose. Disconnect the hose, clean, washed, set in place.
3. On the impeller or pump shaft thread tangled hair. If this happens, remove the pump and remove any foreign objects. And possible failure of the fan or the failure of the electric pump - in this case, the node will have to be replaced, however, before it should be self-drain of their machines.

IMPORTANT!(Click to see)

To learn how to do it, we'll talk at the end of this article, and now we shall understand the second malfunction.

Washing machine does not drain and buzzing: what to do

The reasons are the same as in the previous embodiment, however, there is one in which the fault is not a technique, but a man - overload. If the unit is designed for 3 kg, it is not worth it to ship all 5... equipment simply will not allow the engine to turn, while she will bask and can burn at all. Another reason that the washing machine does not drain and buzzing could be the failure of the control module firmware failure or burning-off of individual contacts. If DIY is no experience with the chips to go into the "brains" of the unit is not necessary.

The unit does not drain: Repair of washing machines with their own hands

Some problems can be fixed stiralki yourself, if you follow certain rules. Let's try to deal with the major problems that can confront the owner of a washing machine. Among them:

• failure of the pressure switch (water level sensor);
• wiring fault;
• electronics failure;
• failure of the pump;
• filter clogging or impeller pump;

What if the pressure switch has failed

To get started, make sure that the pressure switch is faulty. We will look at how to test it. To do this, first off the power wasps washing machine (SM), unscrew the back of the 2 screws that hold the top cover. Remove the top and see a round piece on the wall, to which the hose is suitable, and some wires. This is a pressure switch.

Now the expandable hose clamp, remove the hose from the union. Instead, it set the length of hose of the same diameter, hold the clamp and when the wind blows it. You should clearly hear one or three clicks, signaling that the pressure switch tripped. If it does not, it will have to be replaced.

Electronics failure: Is it possible solution to the problem without having to call a specialist

This problem is common to the ARC with a lot of functions. Exposed program without bringing the cycle to the end, he jumps to the other, with the result that the CM is stopped. Do not panic, we can solve this problem on their own. To begin, shut down the machine with a button and wait 15-20 seconds, then switch on again and load the desired program. If this does not work and the water was again left in the drum, the machine is fully disable (with buttons and from the network) and wait 5-10 minutes. Once again we turn on, will ship program and look forward to. In the case of recurrence of the problem can be said with certainty that the program crashes here at anything. In any case, if the CM is provided self-diagnostic mode, it should be included. By outputting the error code on the display it will report, why does not drain the washing machine. All error codes are available in the data sheet unit.

wiring damage: how to identify yourself

To identify this error, we need a multimeter. We find the pump and detachable from it wires. Next, we produce the same procedure to the terminals on the board. Expose the meter to the sound resistance - it will be easier, no need to look at the display. Prozvanivat individually wire, make replacement if necessary.

Failure of the pump: you can do without replacement

Thus, the washing machine does not drain because of the failure of the pump. Unfortunately, if the impeller is broken or faulty pump motor, without replacement will not be able to do. Another thing, if the shaft thread tangled hair. In this case, dismantle the pump, pulling the pre filter and clean the shaft from foreign objects. Their presence can be determined as follows. We take out the filter, you can see inside the impeller. We try to crank it. It should rotate easily, perhaps with a few jerks - is the norm. If the rotation is tight, then the shaft foreign objects. If you do not rotate, so the engine is jammed, and repair of this unit can not be. Will have to acquire a new one.

HELPFUL INFORMATION!(Click to see)

Clogged filter or impeller pump: what actions to take

Clogged filters - it is generally not a problem. For cleaning it is necessary to unscrew the plug (located at the bottom of the SM and can be hidden by decorative hatches), pull out the filter to remove large debris and clean with it. But with a wound to the impeller thread a bit more complicated. There will have to remove the pump, and only then will be able to clean the impeller from hair and threads. However, this work is a virtue, even novice handyman. The main thing here - the care and accuracy.

It does not work plums in a washing machine for other reasons

If, after all the work carried out there is no change, and water and everything is not discharged, the problem is likely in the electronic module. Here independently perform repairs will fail if you do not have proper education. In this case, the only solution is to call the wizard in the house or take the SM service center.

HELPFUL INFORMATION!(Click to see)

Washing machine does not drain: what to do, the reasons for failures of units from different manufacturers

As is known, each manufacturer has its own peculiarities. Now we look at the most popular brands and will understand why different machines do not squeeze and does not drain.

LG washing machine does not drain: possible causes and "treatment"

See especially the brand LG is that rarely gets the garbage in the drain hose or remains in the nozzles. It all settles on the filter, and it's very good. If you have such a "helper", then the only thing to do - it's not lazy, often to clean the filter. Ideally, this is done after each wash.

Washing machine BOSH (BOSCH) does not drain: the nuances of the models of this brand

There is quite an interesting nuance, which is often overlooked. Pile and debris accumulate in the cap. Not in the filter, namely in the lid. It's pretty much a hindrance. But the most affected area of ​​the CM - pump. It often fails. And so do not wonder what if the washing machine does not drain. If pipes and hoses clean - a pump. Elektronika the firm BOSH very reliable and seldom breaks down.

Repair of washing machines Bosch with his hands.In a special publication of our portal, we describe in detail about how to repair the Bosch machine. You will learn why the broken washing machine Bosch, and when it needs repair, the main methods of diagnosis, or how exactly identify the problem, how to troubleshoot popular washing machines Bosch: a review of repairs on the example of several models.

Indesit washing machine does not drain: features brands, causes and solutions

This brand does not have significant differences from other brands, and so the actions are the same. However, there is an interesting brand Indesit "sore." After water injection it immediately begins to coalesce, i.e., washing machine drain constantly. The reasons for this may be several:

• incorrect connection to the sewer;
• breakage of the water inlet valve;
• pressure switch fault.

If the drain hose from stiralki connected to the siphon, it is raised above the floor to a certain height, and the first point can be omitted. If he goes directly to the floor, you can try to pick it up and throw in the sink. If the cycle is a "set-drain" continues, we go further.

the water inlet valve if it is not closed in time, there is a fracture, pressure switch gives the team an emergency, and the water is drained. The problem with the valve are best left to the professionals. Pressure switch: checking for it, we have already mentioned, however, the case can there be more complicated, and requires a pressure switch setting. This is also the case when it is better to trust the professionals.

Samsung washing machine does not drain: what are the pitfalls in this brand

What to do in the first place if stiralka Samsung does not drain? Apart from all the faults listed above, CM Samsung have a cunning mode. When installed on a "delicate wash" water is not discharged, so as not to damage things. Often it is this reason and baffles homemaker, especially if the SM bought recently. In everything else, by analogy with the previous marks.

As drained independently at the idle drain

It's pretty simple. Stock up capacity with low sides and plenty of dry cloth. Water poured through a filter plug. To do this, substitute the container, we lift the cap. As the filling plug wrap container, pour water and repeat the procedure. So to completely empty the CM.

How to prevent clogging of the filter: recommendation Tehno.guru edition

There are two simple rules:

1. As often as possible Clean and rinse filter.
2. Before you throw things to the laundry, check the pockets, pull out everything that there is. Buttons, coins, pieces of rags, paper - it does not get into the pump.

As you can see, the rules are simple, and execute them is quite simple.

Summarize

Nothing lasts forever, any equipment when something breaks down. The main thing - do not panic, and think clearly. It is always worth checking out the simple nodes independently, so as not to throw good money after bad. And if the problem in the electronics, then have nowhere to go, I will have to seek help from professionals.

We hope that the information presented in the current article has been helpful to our dear readers. Any questions, if they were, you can specify in the discussions below. Editorial Tehno.guru happy to answer them as soon as possible. There you can share your experience in the repair of washing machines, automatic machines, it would be useful to novice handyman. Write, communicate, ask questions. And we, on the existing good tradition, we offer a very instructive to see video on today's topic.