Review of the top 10 mattresses Ormatek: the pros and cons of what to buy, rating

Sleep is essential to man no less than the air, food and water. A wrong or uncomfortable bed not provide recreation, and eventually may even do harm. Quality mattress Ormatek from the company will help you to avoid such problems.

Options

Dimensions:

• For adults. The minimum size - 80 x190 cm, the maximum - 200 x 200 cm.
• For children. Minimum size - 60 x 120 cm, maximum - 120 x 200 cm.

Operation sides. Presented mattresses are used with two or one side.
The materials used in the manufacture of:

• Ormafoam. Unnatural material, foam. It used as the main filler, or acts as the protective box around the block with springs. It contains the minimum number of agents capable of causing allergic reactions.
• Coir - coir. The mixture mezhplodnika coconut palm fiber and latex. Due Koyré mattresses acquire rigidity, comparable with the board. Material durable, breathable, with antibacterial action.

• natural latex. The material extracted from the rubber tree. It has elasticity and flexibility. Withstand high loads, while not losing the original shape. Mattresses are characterized by high wear resistance and softness.
• Memorix. The high-tech foam of polyurethane, which is endowed with "its own memory." It has a high elasticity; It resists the body; repeats the contour of the spine, giving it the correct position.
• Hollcon. The non-woven material made from polyester fibers. Finer yarns interwoven form a springy structure with a high level of elasticity.

• HollconWool. A compound of polyester synthetic fibers and wool. Able to recover quickly after a long load. It has disinfectant and anti-inflammatory properties.
• Bi-Cocos (coconut-Bi) - coconut fiber and polyester. The first - natural, eco-friendly. The latter are needed for bonding material. Bi-products of coconut durable, strong, do not crumble possess orthopedic properties.
• spunbond. Durable artificial material based on polypropylene. It is used as a spacer between the upper layers and soft blocks.

Thin and lightweight spunbond uniformly distributes the pressure between the spring and prevents the upper layers from abrasion fillers pressure springs.

• thermofelt. The material is made by mixing natural and synthetic fibers, and pressing at high temperature. Is required to reduce the amortization soft layers. Positive effect on the anatomical properties of the product.
• Volume felts. Created from natural cotton and synthetic fibers. The mattresses used to preserve the elasticity and stiffness.
• Carpet. A pile fabric of synthetic fibers. Used as a single-sided mattresses lower layer. Saves parameters is not stretched.
• Polyurethane foam. Artificial high quality material with addition antiprolezhnevyh additives. Numerous scientific studies have proven the complete safety for human health and hygienically clean foam.

Types of springs:

• SmartSpring. Thanks to the springs of the same height, but with a different length of wire in the mattress has a stiffness of zoning. In this case, the sharp transitions between the sections there.
• SmartSpring Hard. A stronger version SmartSpring.
• 4D Matrix. In this technology springs arranged adjacent to one another. They are connected only in the central part, and therefore each "keg" is able to independently take the load or not to participate in it.
• 4D Smart. Cases with springs are connected centrally in the longitudinal rows chetyrehsantimetrovym seam.
• EVS. The springs are arranged independently of each - in a separate pouch of fabric, because of which the spine is well supported and the load is distributed evenly over the mattress.
• The block consists of springs of different stiffness in one bunk disposed independently operating elements 1020. Different wire diameter.
• Traditional block with metal springs, intertwined with each other.

The stiffness of the surface:

1 - too soft;

2 - mild;

3 - softer medium;

4 - average;

5 - stiffer medium;

6 - hard;

7 - too hard.

Ormatek Flex

Basic but robust and unpretentious product.

Characteristics:

Type - springless.

Material:

• Foam block ormafoam (in Super Big - high density).
• Memorix (in Flex Memo models).

The rigidity of the bilateral sides of the mattress:

• 4/4;
• 5/5;
• 6/6;
• 7/7.

Maximum load: 120-150 kg.

Pros:

• Product life - 25 years (with the additional purchase of a protective cover to the sides).
• quality construction mattress pad.

Minuses:

• There are low-quality model, which obviously comes from the "chemical" smell. Detect odor just will not work, t. To. The product is tightly packed. When airing the smell goes away in 2-3 days.
• The warranty period without buying a mattress cover is reduced to 1.5 years.
• On average, it comes into disrepair after 3-5 years.

Ormatek Dream

Affordable models with different types of spring units.

The series consists of 13 types of products:

• Lux;
• eco;
• Concept;
• Support (side);
• Memo;
• max;
• Max Roll;
• Memo 4D Matrix;
• Mix;
• Mix Roll;
• Lux 4D Matrix;
• Max 4D Matrix;
• Mix 4D Matrix.

Characteristics:

Models in this series - the spring.

Used independent from each other spring units of four types:

• SmartSpring;
• SmartSpring Hard;
• 4D Matrix;
• EVS500 (512 springs on the location of the person).

materials

• Volumetric felt.
• Hollcon Wool (mixture of wool and synthetic material).
• Used on the perimeter of the mattress in the form of a duct, to maintain the design of the springs.
• Coir.
• Spunbond. Artificial material used as a gasket for improving the wear resistance soft layer.
• Thermofelt.
• Carpet (one-sided model Support). It serves as the lower layer to prevent degradation.
• Latex.
• Memorix foam block.

stiffness options:

• 1/1;
• 2/2;
• 3/3;
• 4 (model Dream Support);
• 6/6;
• 7/7.

Pros:

• The increased thickness of the wire springs so the mattress has received additional properties - has become more rigid and elastic.
• Coir - hypoallergenic natural product that possesses antibacterial properties.

Minuses:

This series does not provide "golden mean" the stiffness of the mattress - either hard or soft.

Ormatek Optima

The series stands out a variety of models and used spring blocks.

It consists of 12 species:

• Classic;
• Effect;
• Great;
• Hard Cocos;
• Light;
• Lux;
• Lux Roll;
• Mix;
• Plus;
• Prim Roll;
• strong;
• Trust.

Characteristics:

The series includes a spring and springless models.

The first spring units are used:

• EVS. Spirals are separated from each other and are in own cloth covers.
• Bonnell. Standard Classic unit interconnected springs.

Material:

• Coir;
• ormafoam (plus two layer strip of the perimeter);
• spunbond;
• thermofelt;
• natural latex.

In these models, there are different stiffness surfaces:

• 3/3
• 4/4
• 6/6

Mixed:

• 4/5 (Great model);
• 5/6 (model Effekt).

Allowable rate of weight - 130 kg.

Pros:

• Tight Jacquard cover.
• With proper and careful use of the model of the classic spring will serve at least 10 years.

Minuses :

• Relative to other models in the series, a mattress with springs Bonnell soft.
• Product Warranty of dependent spring assembly for use in a mattress topper kit, which has side walls, is 5 years, and not 25 as the rest.

Ormatek Kids

The series is designed for use by children and adolescents. Despite the age limit, it has a great choice in terms of models and units.

Characteristics

Kids' Ormatek "mattresses produced spring and springless.

In spring models use blocks:

• EVS500 with independent springs in individual covers.
• 4D Smart - each coil separately located in a fabric cover 4 is connected-cm suture.

Material:

• Coir, impregnated with latex;
• thermofelt;
• spandbond;
• foam ormafoam (used as a base layer, and an additional band for fastening the mattress perimeter);
• Latex (used as an independent layer);
• hollkon.

Stiffness Kids series is divided into the same two-way:

• 4/4
• 6/6

mixed:

• 6/4 (model Comfort, Double)

and one-sided:

• 4 (Dream model, Health)

The load capacity is 50-100 kg, depending on the model.

Pros:

• According to the manufacturer, the series is made of natural materials.
• Hollkon retains heat, carries multiple cleaning and washing without losing shape.
• Moisture absorption is low. Mattresses from it hypoallergenic, antistatic; with antibacterial action; do not absorb odors, quickly restore the form.

Minuses:

• This category includes all the same question about the naturalness and the negative impact on the younger body. Not all natural - a synonym for efficiency.
• Adults should not sit on the edge - the material crumbles.

Ormatek Millenium

In this collection, only two models, but they are worthy of special attention:

• Millenium;
• Millenium 4D.

Characteristics:

Material:

• Ormafoam - upper and lower layer in the form of a box.
• Spandbond - in two layers in contact with the spring unit.
• The compressed coconut coir is used as the lower layer. Because of this, one side of the mattress get tougher.

Severity level for models - mixed:

• 3/5;
• 4/6.

On this series of load capacity up to 125 kg.

Pros:

• Good holds weight.
• Option stiffness change.

Minuses:

- high price

Ormatek ECO

Series combines "green" concepts and "frugality".

It includes 9 types of products:

• Larda;
• Larda Eco;
• Eco-Flex;
• rista;
• Kleran;
• Larido;
• Larido-Roll;
• Pliana;
• Pliana-Roll.

Characteristics:

springs:

• Bonnell (block with dependent springs Traditional).
• EVS (autonomously arranged spirally enclosed in fabric covers).

Material:

• polyurethane;
• spunbond;
• thermofelt;
• coir.

Rigidity of the party:

• 4/4;
• 5/5;
• 6/6.

Load capacity in these kinds of: 90-115 kg.

Pros:

• To produce the standard cover used jacquard or sheeting.
• EVS unit evenly distributes the weight.
• Mattresses with coir - antibacterial, suitable for people prone to reactions to allergens.

Minuses:

• Mattresses made of such materials are not long, 3-5 years.
• EVS springs are not suitable for people with more weight, or problems with the vertebrae.
• Series reported as "eco-friendly", but at the same time on the company's website and in shops indicated that the natural ingredients - low.

Ormatek Season

The series consists of three models with options for installation of spring units.

Seven types:

• max;
• Max 4D Matrix;
• Mix;
• Mix 4D Matrix;
• Prim;
• Prim Roll;
• Prim 4D Matrix.

Characteristics:

springs

• SmartSpring (mattress with different hardness zones);
• SmartSpring Hard (reinforced springs same height, but with different lengths of wire);
• 4D Matrix (springs located adjacent to one another).

Material:

• ormafoam (box);
• latex;
• cpanbond;
• coir.

Hardness (mixed in all models):

• 4/3;
• 5/3;
• 5/4;
• 6/5.

Border load capacity: 150-160 kg.

Pros:

• The product from the upper and lower sides of the natural latex is present, which, among other advantages, has good ventilation.
• Mattress with natural fillers

Minuses:

• Bend at the edges.
• Unpleasant smell, which can not evaporate within a week.
• Strange crunch.

Ormatek Premium

A small series (three models) deserves attention by the use of reinforced coil unit.

Characteristics:

Autonomous spirals of different thickness and rigidity. One sleeping space contains more than 1,000 independent spirals.

Material:

• coir;
• spunbond;
• natural latex;
• foam ormafoam (a box).

Rigidity:

• 2/2;
• mixed;
• 4/3;
• 6/5.

The weight limit: 150-160 kg.

• Models of mattresses of this series distinguishes ensure uniform elastic support over the entire surface, which ensures comfortable use in any position of the body.
• Suitable for people with a weight above the average.

• The high level of naturalness components
• The manufacturer gives a guarantee of 25 years, if you purchase the mattress special protective case with boards.
• Unit with self-running springs not give warps and waves.

Minuses

• Severity level weaker than claimed by the manufacturer.
• Not recommended for people with allergies.

Ormatek Softy plus

This series consists of one model of mattress-topper. This is not traditional, and the thin mattress without springs, to the main or top for smoothing the sitting (or other rough) surface.

Characteristics:

• Basis, it is also springless unit - foam ormafoam.
• Stiffness: 4/4.
• Maximum weight: 190 kg.
• Thickness - 6 cm.

Pros:

• Due to a cover of layers quilted products connected to the foam block, which prevents their misalignment.
• Convenient, comfortable, inexpensive.
• Qualitative tailoring.

Minuses:

• Repulsive smell of a new, just unpacked products.
• by weight of limitation.

Ormatek Profit Line

Here are collected the spring model of medium hardness, which are suitable for most people of average weight.

The series includes 6 products:

• Phoebe;
• Eriya;
• Eriya roll;
• Melia;
• anniversary;
• Clio.

Characteristics:

Material:

• spunbond;
• latex;
• coir;
• ormafoam (as the primary layer and box);
• Bi-coconut (a layer for imparting additional rigidity product).

Stiffness series Profit Line is considered optimal soft:

• 3/3,
• 4/4,
• 5/5,
• Mixed: 3/4.

The maximum weight allowable in these models - 110 kg.

Pros:

• Qualitatively made.
• There are options with springs without them.
• Well keep their shape, are not pressed through.

Minuses

• After a while, there is the effect of "waves", if next to sit or lay down person.
• The smell lasts 3-5 days steadily, and airing in the street does not help.

Which is better to buy

If you have - a supporter of environmentally friendly materials, the acceptable solution would be a series of "ECO". Look closely at the models "Lardy", "Eco-Flex", "Kleran", they more than other positive reviews.

Among the models with spring in the lead the following series:

• Millenium;
• Premium;
• Profit Line;
• Season.

The first two series also belong to the top models.

If the choice of springless mattresses, positive reviews are to the series:

• Flex;
• Optima.

If the plan is worth the purchase of children's mattress vote "Ormatek" model of the respective series. Softy Plus is ideal for those who do not plan to change in the near future sofa on bedOr in the case of combined relaxation / sleep area.

Stiffness: the first and second articles with average or above-average degree.

By weight person: Based on the person's weight indicators, the smaller it is, the lower should be the stiffness of the product.

By age: Children suitable mattress of medium hardness (with spring or without - an individual choice).

Older people are not recommended to use mattresses with the severity level above the average. Otherwise it may cause discomfort in the back (ache, pain) and problems with blood circulation.