What can be done from old leather boots?

Every woman has such things that are worn "to holes".That is, we are so in love with this thing that we do not want to set it aside. Most often this applies to leather boots. Of course, on the one hand - the socks are already worn out, the appearance of the solid "C-grade", but on the other - the bootlegs look like a new thing. Then the question arises: what can be done from old leather boots? Today we will deal with this topic and find the best solution.

to the contents ↑

Doing a clutch of old boots

One of the most common variations of what can be made from old boots is the manufacture of a clutch that will come out to you at a very low cost.

Several attempts - and you will design a trendy clutch!

We create:

• At the initial stage, you need to properly cut the future clutch. The basic rectangle should be at you the size of 37 sm, width and 21 sm in height.
• On each side it is necessary that there is an allowance, with which you can subsequently fold and sew. The allowance is somewhere between 10 and 15 cm on each side.
• All dimensions are pretty rough, as the bootleg size can be different. The size of your future clutch depends on this.
• With the help of sharp scissors or a writing knife, it is necessary to cut the bootleg on the shoes.

Important! We draw your attention to the fact that you do not need to sew a zipper, as you have it. It will be located at the top of the clutch.

• After you cut out the workpiece, you just add up, as suggested. Next, using a special glue and a sewing machine, you design yourself in a short time a unique clutch.

Important! If on the outside you have small defects, you can paste on them crystals, beads, brooch from various materials. In this issue of your imagination, there is where to turn. A great solution is to paste felt floss on the leather blank. A large number of Western actresses go with similar clutches.

to the contents ↑

We make warm insoles for children's shoes

When deciding what to make of old boots with your own hands, you can make not only products for your own use, but also take care of your children and the manufacturer warm quality insole for winter shoes. In this case, you will be sure that the baby's legs will not get wet, they will always be warm and dry.

The instruction on manufacturing of insoles for footwear from old boots:

• At the first stage it is necessary for you to cut off the bootleg. With the help of sharp scissors you will perform this operation. The bottom of the shoe immediately thrown into the trash. It will not be useful to us any more.
• Now we remove from the shoes a native insole, we put it on our leather workpieces.
• Next, use soap, chalk, pencil or marker to circle the insole and cut out new products for shoes from the workpiece.

Important! We draw your attention to the fact that you need to cut out not only the fur part, but also the leather one.

• After completing the previous operation, you will get two leather insoles and two fur insoles.
• Now with the help of the glue "Moment" it is necessary to connect the two insoles together.
• After they have dried, it is worth sticking them inside the shoes. Do this in such a way that the fur part is on top.

Important! In this way, we decided what can be done from old boots - warmed up winter shoes, while saving a lot of money. If you have a large bootleg, then you can make insole not only for a small leg, but for an adult. Try it, experiment and you will succeed!

to the contents ↑

Making a bag of old boots

The most common solution is sewing a bag of old boots with your own hands. Now we will tell you how to make an accessory for a fashionable woman of high quality, beautiful and individual.

Important! The main rule in making a bag of boots with your own hands is the use of quality materials. That is, you can take more than one pair of old shoes, and two. They can be of contrasting color. From this new product will be even more beautiful.

In Action:

• You will need two pieces 26 cm by 26 cm for manufacturing. These will be the future walls of the bag.
• Also three parts that will serve as side parts and bottom and their dimensions are 10 cm by 26 cm.

Important! When making such an accessory, you can not use the part intended for the bottom, then you will have an accessory without a bottom. In this case, at the bottom, you just need to patch the seam and connect the parts.

• After you have cut out all the details, you need to lay out the details on the table and think through all the nuances of the future product. If your shades do not match, decompose and think about how you will stitch them. In contrasting accessories, chess is the perfect solution.

Important! It is recommended to glue all parts before sewing the parts. So it will be easier for you to make a bag of old boots with your own hands.

As you can see, there are several options for what can be made from old leather boots. In any case, do not throw out a leather product, because any quality thing can give a second life!