Dressing their own hands: drawings and diagrams, photos examples

Convenient storage space for personal belongings easiest way to create yourself. This approach eliminates the multiple adjustments and approvals. It allows you to personally monitor all the important process steps. It simplifies the presence of a variety of accessories in the respective market segment. This article describes what a quality wardrobe with his hands. Drawings and diagrams, photos and additional materials will help to realize the most complex ideas with no errors and unnecessary costs. Even when the decision to give the order to execute the art, this information will be useful at all stages of the project from the wording of the job prior to acceptance assembled structure.

Rules for the organization of storage, the main provisions

Storing clothes and shoes, accessories and jewelry should think about taking into account individual abilities and needs. A young couple planning frequent travel, it makes no sense to think about Creating a full dressing room. It may be enough to set the cabinets. difficulties arise with a lack of spaceWhen the allocation of a separate room is simply impossible.

To find suitable housing furniture possible after the preparation of the list of requirements to find personal profile store on the Internet. This article describes in detail the creative process of the implementation of unique projects with production of component parts.

The following are the basic rules and the important nuances that need to be taken into account for the quality organization Storage items:

• Dressing room with his hands can be installed in a separate room or allocated for this part of the passage of the room, loggia, balcony.
• The corresponding amount should be used maximally. Mounted design with floor-to-ceiling windows.
• It is necessary to leave the passages sufficient for convenient use.
• For each type of things create a suitable storage location, taking into account the size, weight requirements ventilation.
• Provide conditions suitable for fitting: space, lighting.
• Visible parts create with improved aesthetic characteristics.

Note! The cost estimate based on initial investment, expected life, the cost of installation of furniture components, building and finishing works.

Preparation of project documentation dressing room: layout with dimensions, drawings

This diagram shows the dimensions of a dressing room, the parameters of the individual elements. Author of the project was able to organize the storage space in the corners. He established guides for racks at different heights to provide a comfortable accommodation a long cloak and short jackets. Even without a thorough study of the market it is clear that a similar structure can be assembled from standard boxes, shelvesAnd other low-cost standard component parts.

However, there is insufficient data for a full-fledged project:

• No entrance. Meanwhile usual Door at wall, or sliding design It will be expensive. It is necessary to carefully consider the relevant parts.
• The documentation necessary to add information about the finish. Here, for example, does not provide the rear wall of the furniture. Therefore, the side plane of the room is necessary to cover layer washable paintsOr other not easily soiled material resistant to mechanical stress.
• No artificial scheme lighting. When equipped with an ironing board will need to install sockets power supply 220V.

The project should be considered together in order not to miss the really important details. Once found a suitable photo dressing room with his hands, drawings and diagrams can be charged to prepare the professionals. They are well aware of the range of accessories. They have specialized software to create volumetric models, which are convenient for careful study of objects from different angles. Of course, the relevant services are provided for free with the purchase of the components in the appropriate store.

In a well-prepared project should have the following components:

• Drawing design set in a particular part of the apartment (house).
• The list with the size, price and other parameters of the individual components.
• data on doors, Wiring, ventilation, Construction and finishing works.

Related article:

At some point, all this ceases to be placed in a traditional wardrobe. There is a logical question: is not needed Walk-in closet? Planning with the size, types of wardrobes, lighting features, and many other nuances - in this material.

What can be set dressing with their hands: drawings and diagrams, photos of typical structures

Useful for the preparation of a preliminary study on the well-established practice of engineering solutions. Note that in the dressing room hall can be supplemented by a similar design intended to bedroom, nursery. Allowed the use of different combinations, creating a unique modifications taking into account the architectural features of a particular property.

Corner walk-in closets in the hallway

It should be noted that at the entrance to the residential facility should be given increased attention to the appearance of the interior mind. Sliding door system has the necessary functionality and aesthetic characteristics. To not load in a closed volume wet stuff, it is recommended to establish close hanger. To remove moisture accurately use "Warm floor"So as not to dry up shoes made of genuine leather.

The latest project for equipping a relatively small hallway. After removing the partition, the passage and increase the free space. It is useful for fitting. To simplify this procedure, binding on the door often set mirror with the top illumination.

Linear type of dressing rooms and cupboards

This example shows that the author of the project was able to put a large structure without overlap window opening. The advantage of this solution is the integrity of the power frame, high strength, resistance to corrosion.

Such solutions are used in equipment niches for mounting multiple functional parts between columns. If necessary, cover the front sliding doors.

parallel type

The same solution is used in wide aisles. To create the impression of greater volume used bright colors for decoration. The rooms especially carefully develop without windows backlight.

Built of the dressing room with his hands can be perfectly combined with the architectural elements. In an exact calculation and it will be qualitatively assembly visually align the planar surfaces of the room. Typical furniture, with right angles on the contrary - selects the smallest irregularities.

L-shaped

The figure shows an example of the protruding column, which had sheathing panels. In a standard embodiment, the recess is used for its intended purpose. Since access to the far side is difficult, there are placed infrequently used items

U-shaped

Note the absence of wide gaps. Unlike standard cabinets, architectural parts used here as separate walls. Dressing room with his hands can be built precisely in the room complex shape. During the operation offset possible. Acceptable application of solid loads (with proper calculation of supports and shelves).

To be objective, it must be noted disadvantages embedded designs:

• They are designed for stationary use in a particular location. Dismantling and transfer to another site is difficult or completely impractical.
• Perfect docking of all units and rooms obtained from experienced professionals. Creating high-quality wardrobe with his hands will cause certain difficulties.
• Fixing elements of construction spoils room wall. This item is not too important, since it is assumed stationary continuous operation.

Walk-in closet in the bedroom

With such a layout design can be studied from various points, the width check passes, ensure no interference with the door open.

Such solutions are well suited to private premises. This embodiment involves the following advantages:

• a quick search of things;
• Free access;
• good ventilation;
• democratic component costs;
• easy installation.

Note! Such details, unlike the built-in furniture, it is possible without further difficulty to move around the room, move to other locations.

This project is not provided for construction, special finishing.

The device is a dressing room from the pantry in the Khrushchev

Below are the comments, which will be useful in refining the parameters of a dressing room small size of the project:

• Top shelf (1) may not be needed, if the bottom is supposed to put the box.
• The support (2) shall be designed for the future workload. With a large weight of things you need to install the enhanced console elements fixtures.
• For lifting heavy objects to great heights (3) can be applied lifter, but it complicates the design.
• It is easier and cheaper to use a ladder. Her skis, fishing rods and other long objects are placed in a special wide slit (4).
• The dimensions of this space (5) is set in view of specific dimensions of the art.

Requirements for separate parts of the structure

The floor in the dressing room with his hands do not have to do from traffic jamsIf there is supposed to complete the fitting room area. Sharp Heels damage quickly enough durable flooring. It is better to choose more resistant to mechanical stress option. You should not choose too bright types of decorative finishes to minimize the distorting external influence. This approach simplifies the formation harmonious way during the selection of the individual components wear. Suitable surface should not be slippery. In some situations it is useful to system installation "warm floor".

Similarly, in terms of function, convenience and future operation of the project chosen by the other components of the dressing room with his hands.

Features power skeleton

The supporting part of the structure is created from different materials, with different types of finishes. This table lists the parameters of the distinctive popular options:

Definition with the appropriate details due to a complex of factors, specifically earmarked. So to ensure transparency in visible places set of glass parts, plastic. Inside - lattice structures.

Choosing the doors to dressing room

The easiest way, if there is enough space. Using a standard web to swing the system should not be considered in detail. Below are other engineering solutions with the comments about the benefits, features and shortcomings.

Storage system of things in the dressing room

In such surfaces inserted hooks, rods, shelves. If necessary, you can quickly change the location to remove unnecessary and add the necessary functional elements in the dressing room with his hands.

They are rigidly attached to the wall with fixing the width of the distance. However, shelves can be mounted at different levels as required. The corresponding transformation of any user to quickly perform without additional fasteners.

Console mounting (1) provides versatility, easy access. Designs with a support on the floor (2) are characterized by high strength. They are designed for storing heavy items. Mobile modules (3) are fitted with wheels.

Clothes storage system

This is content for cabinets and wardrobe provides storage of things in the right conditions, simplifies operation. Special standard elements are used individually and in various combinations. They are suitable for large projects and a relatively simple alteration of their hands a small wardrobe out of the closet:

• standard universal shelf (1);
• closed box (2);
• rod with hangers for long (3) and shorter (4) of things;
• transparent shelves (5), which does not hinder the review of objects under them;
• basket with perforations (6) for better ventilation;
• drawers (7);
• Trouser holders (8);
• the lower pad (9) - the most durable, you can place heavy things.

shoe storage system

shoe store in a position at a slight slant. For models with long tops establish appropriate size niche. It is better to make the support of several bars to facilitate ventilation.

Proper lighting dressing room

Criteria for quality of engineering systems:

• sufficient brightness;
• the natural range of the luminous flux, does not distort the colors of things;
• can be mounted in tight spaces.

In this project, the classic incandescent lamps are well consistent with the overall style, design and sconces chandelier. They create light in a wide spectrum close to natural. Good visibility in the niches can be achieved with the use of fuel-efficient LED lighting.

Requirement dressing room ventilation

To improve the efficiency set compulsory systemWith an electric fan in the duct.

Where to purchase components and complete sets of prices, the current state of the market

Photo	Brand / model	Dimensions, cm	price, rub.	notes
	PAX / GS 450	53,5×117×40	7200-8650	Includes dressing room has racks, rails, shelves, crossbars, fasteners and plugs for mechanical parts.
	- / Miolla	88×160×45	2480-4500	Inexpensive dismountable structure with a cover of nonwoven material. It is not difficult to gather his own hands for a few minutes.
	- / Orlando 1	210×250×50	18200-21300	This kit dressing room manufacturer of the pantograph. This furniture lifter facilitates the raising and lowering heavy or large items.
	Elfa / Comfort 1	—	64200-67800	Kit to equip a dressing room with his hands.
	Tatkraft / Saturn	84-121,5×42,5×113-198	2280-3650	Universal rack on wheels.
	Amethyst / GR128S.300CP	6,2×30	70-120	Clothes hanger 128 mm retractable L300 GR128S.300CP

On an individual design project of dressing rooms made to order domestic and international profile of the company. This process is no different from the usual furniture manufacturing.

How to make your own hands dressing room

Implementation of the project consists of the following steps:

• selection of a suitable location, size specification;
• definition of function and design a dressing room;
• preparation of project documentation package (drawings, shopping list);
• purchase of products, delivery, installation and commissioning;
• execution of construction and finishing operations.

At each stage, you can seek help from professionals.

Design projects wardrobe rooms, a photo with comments