🔧 tips for polypropylene pipes: the rating models and criteria

If you have to perform the installation communication systems, Then you need a soldering iron for polypropylene pipes. We have prepared for you a list of the best models, based on a positive consumer reviews. We suggest you get to know the criteria that should be guided in choosing the optimal device.

The device and principle of operation

Design soldering may differ. Typically, they consist of:

• housingWithstands high temperatures. On it are indicators to help you determine that the device is ready for use;
• heaterHaving a characteristic shape. In some models, this cone-shaped plate, in others - a cylindrical rod. The plates fitting holes provided for different nozzles. The dimensions depend on the required capacity;
• thermostatAllowing the temperature change process;
• standsWhich can be specific and universal. Depending on the model, a soldering iron stand with cross carried, U-section, rectangular. The latter type is preferred;
• orificeWhich may be homutovidnymi or have a cylindrical shape. Due flat and smooth surface, it becomes possible to stabilize the process and ensure optimum heating rate. Special non-stick coating prevents sintering of the softened plastic.

Attention! Compound polypropylene pipes is usually performed by heating to 260 ° C temperature.

Principle of operation welding machine It requires softening material soldered parts and their subsequent connection. For this purpose, the mandrel wear member with socket and trimmed pipe slips in the bore of the sleeve, preheated to a certain temperature. After waiting for the right time, the elements removed and combined.

Attention! To get quality compound, the surface should be uniformly connected elements to heat up.

Selection Criteria: focus on the performance of the soldering iron for polypropylene pipes

To ensure a tight connection polypropylene tubes certain sizeYou need to use a soldering iron with suitable characteristics. We offer to meet the criteria that may influence the choice of a suitable model. Focusing on them, you will gain a better model.

Power

Performance soldering iron and its ability to directly depend on the given technical specifications. Choosing a suitable option, you should, first of all, start with what you plan to solder pipe. It is believed that the power of Soldering iron for home use It must be 10 times greater than the diameter soldered elements.

For device home systems usually take the pipe diameter of 63 mm. On this basis, for domestic use, you can select the instrument power 0.5-0.6 kW. Given the proposed range of manufacturers, can be safely choose soldering polypropylene tubes with a power of 0.8 kW.

Comment

Andrew Feofanov

recruitment specialist tool "VseInstrumenty.ru"

Ask a Question

«The greater the capacity of the device, the faster it will come to operation. "

Nozzles and tips for additional functionality polypropylene tubes

Depending on the configuration of the heater, two types of nozzles may be included in the package:

• cylinder, closed on one side, if the heater is flat. Fixing occurs as a clamp, using bolted connection;
• Mandrel and sleeve, if the cylindrical heater.

The presence of additional nozzles optimizes time on welding of polypropylene pipes of different diameters. Their number has a serious impact on the cost of the soldering iron. The larger the diameter of the nozzle, the more will have to pay.

Attention! If you do not plan to solder pipes of large size, buy a soldering iron with a large number of nozzles is not justified financially.

In addition to size, you should pay attention to the nozzle material. Preferred products with non-stick coating.

The delivery of some models include additional features that extend the functionality of the soldering. Besides conventional tool, this may be, for example, cutter required when working on the device aqueduct polypropylene tubesAs well as equipment by other devices.

Leading manufacturers soldering polypropylene tubes

Current models can be found in the directory:

• Candan. Turkish manufacturer offers quality products at an affordable price;
• Valtek. Russian-Italian company offers reliable device;
• REMS. Soldering irons are durable heating element and the possibility of fine adjustment processing temperature;
• Gerat Weld. The Chinese manufacturer offers available soldering irons with an average power of 1.5 kW, ideal for home use;
• Rrorab. Chinese equipment is low cost. At the same supplied with gloves, wrench, tape measure and screwdriver;
• Aquaprom. Domestic manufacturer offers household soldering irons with different technical characteristics;
• Bosch. In the catalog of the German manufacturer presented high-quality tool for both beginners and professionals;
• Rotorica. Household and professional use soldering irons with digital thermostats and nozzles, coated with Teflon;
• Electromash. Domestic manufacturer was able to combine price and quality.

Soldering iron for polypropylene pipes - a rating of the best models

With a large variety of models offered by leading manufacturers, it is difficult to choose a soldering iron with optimum properties. We are focusing on the reviews of real customers accounted to you list of the best devices.

For novice installers

If you're new to mount heating system or water, do not chase a powerful device. For you, the best option would be soldering with a simple configuration, and limited functionality. We offer to meet with the rating of these models to make it easier to decide which option is best.

Resanta ASPT-1000 65/54: Rating 5/5

Chinese solder attracts an affordable cost. Suitable for soldering pipe the transverse dimensions of 20-63 mm, which is optimal for everyday use. The process temperature may vary in the range 50 ° C-300 ° C at a maximum power of 1 kW.

The package includes a carrying case with a key, screwdriver, Stand and instruction. On connecting to the network and reaching the selected temperature indicators show special. Protective coating extends the life of nozzles, but the quality of the surface of some users has come under criticism.

Feedback on the model 1000 ASPT Resanta

Resanta ASPT-1000 65/54

ENKOR ASP-1500 / 20-63: Rating 4/5

Relatively simple design of the soldering iron makes it popular among novice masters. It allows heat polypropylene elements soldered to 300ºC. It allows the simultaneous use of the three nozzles of different sizes. The degree of heating can be adjusted by a thermostat. The maximum power of 1.5 kW.

Review model ENKOR ASP-1500 / 20-63:

ENKOR TSA-1500 / 20-63

BRIMA TG-171: rating 4.8 / 5

Soldering is ideal for installation of various systems of polypropylene pipe. Iron has affordable price and compact size. Characterized by reliability and versatility. Suitable compounds for polypropylene elements with transverse dimensions 20-63 mm. There are three seating holes. At a power of 0.75 kW unit provides fast access to the operating temperature. Complete with case and an additional tool. A sufficiently accurate degree of heat control.

BRIMA TG-171

CALIBER NEA-900T PROMOTION: rate 4.5 / 5

The simple design concept at an affordable cost makes the device relevant to novice installers. Characterized by reliable operation. The heater has xiphoides form. Allows simultaneous heating elements of two different sizes to a maximum temperature of 300 ° C. There is no possibility of adjusting the degree of heating. It comes with six attachments, and carrying case.

Feedback on the model CALIBER SVA-900T PROMO:

CALIBER SVA-900T PROMOTION

ELITECH LUT 800: rate 4.5 / 5

A budget option. It comes with six nozzles sizes, whose parameters vary in the range of 20-63 mm. Power unit 0.8 kW is sufficient to heat the polypropylene to 300 ° C. After warming up to operating temperature, the device cools sufficiently rapidly. It allows you to create a sturdy, flat seams. Stand machine, some users find uncomfortable.

ELITECH SPT 800

With the features and operation of model compounds procedure polypropylene pipes is possible to understand by looking the following video:

for professionals

For professional use requires soldering with broader functionality, sufficient capacity and the degree of reliability. We offer to meet with a rating of soldering, recommended for professionals.

Dytron SP-4a 650W TraceWeld Mini blue: Rating 5/5

The model is equipped with a cylindrical Tan. The manufacturer has developed it specifically for professional use. Drum head. Power 0.65 kW. Temperature control is performed by a processor in an automatic mode. Can welding pipes with diameter 16-63 mm. The package includes a pipe cutter, carrying case and other tools. On nozzle coated Teflon coating.

Review model Dytron SP-4a 650W TraceWeld Mini blue:

Dytron SP-4a 650W TraceWeld Mini blue

KERN WELDER R63E: Rating 5/5

A popular option, wherein the simplicity of embodiment and high quality welding. Metal housing. Suitable for professional use. Supplied with six nozzles with Teflon pipe joint with transverse dimensions 20-63 mm. The simultaneous use of two nozzles.

Review model KERN WELDER R63E:

DYTRON POLYS P-4A 1200 W: Rating 5/5

Professional Model Czech production is ergonomic and high quality. Integrated microprocessor allows sufficiently precise control of processing temperature in a predetermined range. The margin of error is only 1,5ºS. Heater disk type with a capacity of 1.2 kW. The apparatus is supplied with nozzles with a diameter of 40-90 mm. It can be operated inside and outside the building.

DYTRON POLYS P-4A 1200 W

WELLNER WR-63: Rating 4.5 / 5

Powered by a 220 V network It provides heating to the maximum temperature 279ºS at minimum 200 ° C. The built-in thermostat ensures precision heating with a deviation of 3 ° C. The minimum diameter of the elements to be connected at maximum 20 mm to 63 mm. Product weight is 9 kg, dimensions 370 mm × 120 mm × 50 mm. Complete with six nozzles. It can be used to form strong welds.

WELLNER WR-63

Wester DWM 1500: rate 4.7 / 5

Heats polypropylene tube to 300 ° C. It has a capacity of 1.5 kW. Heats xiphoides form. The temperature change is performed using the thermostat. The basic package includes 6 nozzles. Acceptable pipe joint with transverse dimensions of 20 to 63 mm. Provided cutter.

Wester DWM review the 1500 model:

Wester DWM 1500

Share in the comments how you use soldering, and how are you satisfied its functionality.