Is it possible to cut wood grinder? You can, but right

We must start with the fact that, in any case, it is better to operate a tool that is specifically designed for a particular operation that you need to make. All other shifts are justified only in exceptional cases where the necessary tools for some reason was not on hand. This also applies to the question whether it is possible to saw wood grinder. In this article we will look at Housechief of the nuances of this process and the opinion of experts.

What can be done at all Bulgarian

Angle grinder, in common Bulgarian, is able to perform many operations.

The more powerful engine - the more professional class of device. For convenience, quality models are equipped with handles that allow you to securely fix the tool during operation. Domestic models are powered by a conventional network. For professional tools require three-phase power supply of 380 V.

What operations are performed Bulgarian:

• cutting;
• polished;
• grinding;
• sharpening.

LBM can work with different materials: concrete, metal, wood, brick and ceramics, stone, plastics.

For the convenience of grinders can be permanently fastened with a special fixture on the work surface. Some models are equipped with adjustable drive speed.

What is the danger of working grinder

Any power tool is potentially dangerous, especially for those who ignore safety measures and protection at work. What is dangerous in Bulgarian:

• LBM nozzles rotate at very high speed: more than 10,000 revolutions per minute;
• most of the rotating disk is not protected by a cover;
• when cutting material is often formed small splinters and sawdust, which scatter at a high speed from side to side;
• powerful device is quite difficult to hold in your hands, especially if the material for cutting is a complex structure.

Tip! Choosing nozzles for Bulgarians, pay attention to their condition: they must not have any defects. Any unevenness or a chipping may cause sudden fracture of the material during operation.

Tip! If you do not have experience with the LBM, did not seek to acquire powerful professional models. It is better to take the appliance to a disk with a diameter up to 125 mm.

Why Bulgarian is difficult to process wood

First of all, it should be noted that the high disk rotation speed is different from the circular saw blade grinder. And even the existence of compensatory ring, which comes bundled with the disk does not solve the problem completely. But if your angle grinders have variable speed, this part makes it easier.

But the main difficulty is not in it, and in the structure of the wood itself, often heterogeneous and knotty. In addition multidirectional fiber is present in a tree resin, there may be pellets or ingrown wire that you just will not notice. In general, the tree - a material unpredictable. During operation, you can meet with an unexpected obstacle, and as a result, a jerk that can knock out of the hand tool and send it to a dangerous vector.

If your intention is to saw grinder tree on the site, you have to keep it in a horizontal position. This will make the grip uncomfortable and increase the risk of injury.

Important! Strongly recommended to saw wood tool with no adjustment of speed rate and is not intended for this purpose nozzles.

What tips can be used to work with wood

As has been said, not every head is suitable for this task. Do not risk using the wild are not designed to work with wood. Possible variations of nozzles are shown below.

Chain drive or the cutter

This embodiment has a nozzle device which enables even when biting chain mechanism rotate it, eliminating the probability of sudden jerk.

In principle, you can cut the chain drive, if it has a diameter of 23 cm, the only cost will be a lot of such attachment.

Saw blade with a small number of teeth

Please note that on the surface of the disc manufacturer does the information on the maximum number of allowable speed.

These discs, in addition to wood, coping well with aerated concrete blocks.

Disks of tungsten carbide

These nozzles are relatively new and have become very popular. The reason is that they are easy to handle with small metallic inclusions at high speeds.

Note! Great demand Rotarex discs that can be used for cutting wood.

In addition, in fact, drives for wood, for angle grinders have other tips.

Nozzles for grinding wood

Once the machine is called a grinding, polishing it with her there should be no problems. For this purpose, working with wood using a nozzle holder, which is molded abrasive wheel with grain from big to small.

Things to remember when working with grinder on wood

Most importantly, what sin many, in any case, do not remove the protective cover, as you would not want to see the cut. disk damage can occur at any time, and the pieces will fly not only the operator, but also in others, and with such incredible speed that no one had time to react.

What is more important:

• you need to check the strength of fixing the protective cover;
• check the integrity of the drive, eliminating the ones that are chipped or cracked;
• grinders should be kept so that the protective cover was part of the operator;
• starting work, check the tool is idling at a different speed. The instrument should be no vibration;
• before work should examine the tree for the presence of knots;
• hold fast to the grinder with both hands;
• from time to time to take a break, looking at the disc;
• if the grinder has jammed, immediately turn it off;
• choose when the stable position of the body;
• make sure that the cord does not come under the disc;
• move only with off tool.

As it is impossible to cut wood grinder

I repeat: it is impossible to cut wood and any other material without protective cover! At work do not apply pressure to the grinder with a great effort. Never make the direction of rotation of the disk onto itself - only on themselves.

Do not cut the trunk, if the thickness exceeds half the radius of the circle. Do not work if other people, especially children, are near you. Do not touch the nozzle immediately after use, is heated from the cutting and friction metal can cause serious burns.

Finally, a small video on our topic, which will help you understand the basics of working with this tool:

What conclusion can be drawn from all the above? Is it possible to cut wood grinder? You can, but it is better to take for this saw. Just for the reason that the risk is quite large. If you own a confident this tool - it will rescue you in a desperate situation. Have you tried to saw grinder? Share your experiences in the comments!