CONTENT
- 1 Sputnik "Tricolor" - what is it
- 2 Antenna connection and adjustment of "Tricolor TV" on their own
- 3 Missing channels to the "Tricolor TV": how to set up the receiver
- 4 How to set up the TV guide on "Tricolor TV": several reasons and tips
- 5 How to update the "Tricolor": some nuances
- 6 Summarize
Sputnik "Tricolor" - what is it
The first question that occurs to him that bought the plate - to set up a satellite "Tricolor TV"? After all, this does not exist. Quite simply, it is called «Eutelsat». His position over Europe - 36˚V.D. Above the Ural, Siberian and Far Eastern District - 56˚V.D.
ry pleasure to watch for the St.Sputnik «Eutelsat 36B" - a high-power transmitter with five steerable beams and seventy transpondorami. In addition to Russia, Ukraine and CIS countries, it broadcasts to Central Africa, Europe, the Middle East and Central Asia, which highlighted 27 of 70 transpondorov. About configuring plates "Tricolor TV" on the satellite alone today we'll talk.
Antenna connection and adjustment of "Tricolor TV" on their own
some tools (hammer, screwdriver, wrench 10) will need to prepare for connection and setup as well as:
- choose a location for the installation;
- install and connect the plate;
- configure the receiver;
- adjust the settings of satellite TV;
- register receiver "Tricolor".
As such, the acquired satellite, but you can ask the dealer to have collected it at the point of sale
ATTENTION!(Click to see)
Assembly and installation of the antenna requires utmost care. In the case of incorrect installation is possible equipment malfunction or failure. The manufacturer or supplier, in this case in performing warranty repair fails.
Setting the "Tricolor TV" satellite dish
First of all choose a place, paying attention to the way directed similar plates from the neighbors. Installing the antenna in the same direction. The main task - to provide a clear view towards the satellite. Here it is necessary to introduce a line that connects the dish and satellite. It should not be interrupted by anything, for example, high-rise buildings, the forest belt. If this happens, the plate should be raised higher. In this case, you should know that even glass will distort the signal. Best would be to set the plate on the roof or the outer wall of the building.
You must correctly position the equipment when installing, otherwise good signal reception is not guaranteed
How to connect the "Tricolor" to the TV yourself
In this work, the difficulties will arise. We just need to clearly follow the instructions supplied with the antenna. In general, the following steps:
- connection cable to the TV;
- switch the TV;
- Activation LNB-supply (follow the prompts to the Start menu);
- press «EXIT» to exit automatic search.
Listeners may differ in appearance, but the logo on the "ease" will always
Setting the "Tricolor" receiver: the nuances of the job
After complete connection, you must go to the "Settings" menu where the PIN-code is entered (default "0000"), then you need to provide the following information:
- "antenna" − 1;
- "frequency" − 12226;
- «Eutelsat W4 satellite" - Eutelsatseasat;
- «FEC» − ¾;
- "polarization" - left;
- "Flux rate" − 27500.
request the PIN-code page
Next, you will need the help of a second person, who will monitor the signal strength display on two scales, while the first is to slowly move the first plate to the left-right (lower scale), and after finding the maximum level - up and down (upper indicator on The TV screen). After finding the maximum level of fixed plate. For detailed instructions on how to set up the antenna "Tricolor TV" on their own, can be obtained around the clock customer support at the telephone number listed in the documentation.
It looks like a signal strength indication on the TV screen
The device for adjustment of satellite dishes "Tricolor": how to use it
Setting the "Tricolor TV" with a special instrument called a "satfinder", is simpler and does not require the help of a second person. With the optional cable length indicator is connected close to the antenna, and its scale displayed signal strength indicators, similar to those that appear on the screen when you set up TV.
IMPORTANT!(Click to see)
When working with «SatFinder» receiver must be enabled. Only in this case the LED will work (from the receiver receives the voltage of 18 V)
SatFinder - this priborchik will easily adjust the antenna direction and catch the best signal
The only drawback of the device can be called a cost, which is quite high. How about running such equipment can be found in a very short video clip.
As recorded satellite dish "Tricolor TV"
After full adjustment of the antenna and fix all the bindings on the screen should appear an information channel. If not, you should click on RC "0" button. Now you can turn off the TV, but the receiver must be left enabled.
Official website of the Tricolor, which should be recorded
So there is a new user registration
The most convenient way is to fill in the registration form on the website "Tricolor". The procedure is simple, deal with it by virtue of any novice user. To do this, you must have "at hand» ID number, number of the receiver model, serial number of the equipment, personal rooms with maps that are provided, passport details, mobile phone number (if there is, and home) and electronic mail. After entering the data press the button "Get the code", which come to a mobile phone as "SMS". This code is entered in the appropriate field. It remains to wait for "sms" with a login and password to access the Members Area. Now we can proceed to the activation of view.
The first SMS is entered in this field, and then comes the second with a login and password to the personal account
Turn on the TV, change channels until you see "scrambled channel", and wait. In this case, you can turn off the TV, but the receiver should work. Setting can last for 8 hours. If during this time the channels were not activated, you should call around the clock customer support (phone specified in the technical documentation).
GOOD TO KNOW! (Click to see)
In the event of a complete lack of skills using the Internet, you can ask for help in dealerships, which will perform all the necessary actions.
Through personal study, you can easily pay TV using any credit card
Missing channels to the "Tricolor TV": how to set up the receiver
Let us examine what to do if the channels were missing. As in this case, adjust the "Tricolor TV" on their own? Channel tuning should start with simpler solutions, one of which will appeal to the hotline service center, where a specialist will explain step by step what to do. Often, this problem occurs after the update. However, on their own, too, you can try to resolve the problem.
Manual channel search on "Tricolor TV"
The very first thing you should do before you configure the "Tricolor TV" on TV - is to reboot the receiver. Sometimes even a simple procedure results in the channels in order. If it does not, reset to factory settings via the main menu.
You can use the settings reset to the factory and run them again
If there is an inscription "site search" to follow the advice. It can be run in manual and in automatic mode, but it is better to start with the second option, leaving the first in case of no result. To do this, go to the manual mode and enter the parameters:
- "Network Search" - incl .;
- 'Frequency' - 12226;
- turn on the desired satellite ";
- "Speed" - 27500.
Now we can only follow the prompts on the screen, and then save the result.
In no case did not turn off the receiver before the full upgrade - it can lead to failure and equipment failure
HIGHLY IMPORTANT!(Click to see)
During the update, you can not turn off the receiver. If this happens, correct the problem on their own will not succeed. In this case, the receiver will have to bear the nearest service center and pay for the re-installation of the software.
When all channels are found, you need to save the information by clicking "Done"
Check the signal level, if the "Tricolor TV" is not working
When appears on the display "no signal" should start small. We check the quality and integrity of the cable connections. If everything is in order, perhaps, got off the antenna. We try to slowly turn the dish until until you see the image of any quality. Next, double click the red button on the remote control ( «F1» or «i»). You will see two, at which the scale and the need to focus (how to set up a plate of "Tricolor", mentioned above). You can also use the digital display, if it is available.
Error 0 at Tricolor TV.In a special publication of our portal, we describe in detail about how to resolve the fault yourself without difficulty.. You know that is a mistake on 0 Tricolor TV, decryption failure, and how to correct the mistake on 0 Tricolor TV: effective ways.
How to set up the TV guide on "Tricolor TV": several reasons and tips
It happens that the EPG stops working on some (or even all) of the channels. This is not only inconvenient for the user, but also can lead to a malfunction of the receiver or a complete failure, and therefore, it is necessary to correct the problem. There can be several. This happens at the wrong time setting on the receiver, the event of malfunction of the equipment or outdated firmware. As usual, you should start with the most simple - set the correct time, date and restart the receiver. If this does not work, reset to factory settings and re-enter the parameters. If this does not work, try to update the software may update came out. How to perform a third option, we will now discuss.
With the help of the program guide, you can learn about what a film that shows the currently
How to update the "Tricolor": some nuances
There are no complications. The main task - to connect the receiver to the Internet. To this end, the rear is a necessary connector.
If the update is available for your software, the TV screen will be prompted to update the software. It needs to be taken. After upgrading the receiver will restart automatically, and will continue to be invited to one more update. It should be remembered that the different versions are required for different models. On the table can be found below.
As you can see self-tuning and "Tricolor TV" connection, it can not be called difficult.
Summarize
Connect the antenna "Tricolor" yourself, you can save money the family budget on other essential needs. However, we should not overestimate its strength. And if the home worker has no doubt that he can still perform properly and carefully, it is better to seek help from professionals.
If there is any doubt in their abilities, it is better to seek help from professionals
We hope that outlined in this post, the information has been helpful to our dear readers. If you have any questions, Tehno.guru editorial team will be happy to answer them in the discussions below. If you have experience of similar work, please share it in the same place - it will be helpful to novice handyman. For a more complete disclosure topics offer watch the video "How to set up the antenna" Tricolor TV "" on their own.
