Built-in refrigerator: types, advantages, characteristics

The increasing popularity of decoration kitchen studio with built-in appliances offers refined cuisine make the interior, without flaws and unnecessary things stand out, often breaking design.

Overall part

refrigerators the standard version is no different from embedded. This embodiment also functional, contains the same characteristics.

The external facade is made in a simple style and has nothing superfluous. Sizes and dimensions are the same values ​​as most of width 50-58 cm and a depth of 50-55 cm. Height - 80 cm and up to two meters.

The wall thickness is increased at the rate of increase of the thermal insulation. Tightness embedding (one orifice for cooling the compressor and the discharge of accumulated hot a pair of air when operating the motor-compressor) provides technologically thickening pledged insulation.

climate class

Devices assigned to the class that says about the desired use of the device installed in the climatic environmental conditions for trouble-free operation. Classification helps determine which model is suitable for use, taking into account the peculiarities of the climate where they live.

Subtropical subnormal class of said temperature range with tolerances (+ 10 ° to + 38 °). Manufacturers and assign multiple classes to one product. Proper operation in the respective temperature conditions - guarantee continuous operation.

The volume of the chamber

Forms of execution:

• dual-chamber;
• single chamber.

refrigerator - a full-featured device that will keep food in the kitchen frozen and chilled. The classic version - a camera for freezing and refrigerating compartment.

Single chamber embodiment is used for a specific purpose - only cooling or freezing.

Types location freezer compartment:

• vertical upper location ( "top") refers to a standard embodiment. Priority affects the energy savings. freezer in the upper part of the housing will save up to 10% of electricity. The chamber volume reaches 200 L;
• Vertical Bottom placement referred to as "combi". The volume of such a freezer - up to 300 liters;
• lateral location Side-by-Side provides the volume to 400 liters.

Manufactured refrigerators with one common door and separate doors on both chambers.

subtleties embed

The first option is total isolation of facade made of wood or MDF. The only thing that can give the location of the refrigerator - is technologically provided for ventilation, which is located at the bottom of the built-in appliances.

Fully integrated version merges with the general background of the kitchen-studio, which looks stylish and no notable objects in the interior.

The second type - semi-recessed. In this case, the front part of the equipment is not closed facade, but remains open and accessible for manipulation and settings. semi-recessed panel unit is performed with a display and a set of indicators corresponding for internal (processes occurring within the chambers) and the external equipment status.

A method hanging doors

Apply two ways hanging doors on the frame embedded refrigerator. The first is carried out by rails (Method similar to the structure and the principle of horizontal sliding drawers and shelves of cabinets furniture set), which slide between themselves. The disadvantage - the gap formed in this embodiment, facilitates the accumulation of dust.

The opening of the door is carried out at 90 degrees, which creates discomfort in use.

The second way - is hinging the doors of the refrigerator. The front facade due hinge moves in synchronism with the door of the refrigerator. Such variant attaching opening angle of 110 ° -115 ° is more acceptable. You should also take into account the direction of opening the doors and take care of the correct execution of the facade panels.

It is important to make the necessary measurements that require care and thoroughness. It is better to entrust this time of professional installers built-in furniture. Cabinet doors should match the size of a refrigerator.

Producing furniture manufacturer can build on the provided cooling equipment size by making a niche and a pallet on the nominal size.

compressor type

Determines the operation of the mechanism.

• linear (discrete);
• inverter.

Standard - discrete type, operates on the principle of injecting the desired temperature in the chambers (predetermined program) operating at full capacity, and then switches off. The workflow includes permanent cyclical on and off.

Increased noise level. As for the noise level in the current model, its value is 40 dB.

The inverter operates at a different specificity, without pauses due to fluctuations in the intensity of operation depending on the temperature of the refrigerating and freezing chamber and maintain the desired values. He is more durable because they do not, there are constant motor racing.

Such a compressor is less prone to wear parts and virtually noiseless. Automatic control of temperature parameters saves electricity consumption.

species:

• With one;
• one compressor.

In the refrigerator with one compressor is impossible to defrost on the camera separately. The power consumption of such a model more economical. Dual-circuit cooling is assigned to class A and A +.

Refrigeration equipment with a compressor on each camera allows you to defrost both the freezing and refrigerating separately. The cost of such a model is 20-30% higher than the model with a single compressor.

When installing the refrigerator should not forget about ventilation openings. According to the construction and mode of operation of the compressor, it is necessary to provide a supply of cold air and discharge of hot. To do this, make special openings with a grid at the bottom of the front and rear parts of the facade.

For temperature normalization mode corresponds valve provided for controlling air flow.

There are three types of defrosting:

• manual defrost It is receding into the past, as the last day of refrigeration equipment. Defrost by forcibly turning off the refrigerator provides quarterly or semi-annual manual defrosting mode depending on the operating conditions. The price of this type of defrosting wins, but loses the practicality and labor. This method will not work when embedded embodiment, as the front panels are afraid of water, it may start to collapse MDF.
• System No Fost positioning itself as picky to use, it does not give the user the hassle of maintenance. Cold air is circulated through the chambers, preventing build up on the walls and ineyu ice due to a heating element arranged above the compressor. The water flowing down in a special container evaporates by heat emanating compressor. The fan that drives the air in a circle creates additional noise, even though he dies under the thickness of the panels. Products with this type of cooling should be stored in tight packing.

• drip method It can be found in modern refrigeration systems. Automatic system operates on the principle of the accumulation of ice on the cooling element cooling chambers, forming ice. In automatic disabling the compressor (less intensive operation) starts to melt accumulated ice and water, draining, evaporates due to heat generated by the compressor.

How to use

Refrigerators manufactured electronic service panel in the form of a touch display and electromechanical control. The first model is more practical due to the intricacies of the internal mode settings.

Panel located at the top, - from a combination of programs necessary for independent control of the freezing and refrigerating compartments.

Electromechanical control consists of compressor power regulator. One control for each camera if they are independent.

Energy consumption

energy efficiency labeling is divided into classes. The letter A +++ is the minimum allowable power consumption. Each star after the letter means a reduction in energy consumption by 10%.

Additional features and characteristics

• humidity level control to maintain product freshness for a long time;
• antibacterial coating inside the chamber will not allow bacteria and fungi to multiply if the product inside is damaged;
• shelves tempered glass is stronger and more reliable;
• sound alarm, warning of the door is open, the temperature drops and reboot.

Pros embeddable refrigerator

Advantages:

• economically separate, permanently working on a kind of aggregates. Thickening of the insulation class and energy consumption makes this device attractive;
• little noise. The inverter compressor (in some models), panels of wood or MDF provide noise reduction;
• embedded unit merges with the interior without disturbing the harmony of design solutions.