Overview 8 kinds of best air spray guns: advantages, disadvantages, characteristics

Pneumatic airbrush - a tool used in carrying out painting work, applying primers, liquid rubber and other materials on a variety of surfaces.

Distribution of paint by compressed air, creating a spray cone while passing through the nozzle. For air compressor is used.

types

• high pressure (HP);
• high volume low pressure (HVLP);
• small volume of medium pressure (LVMP);
• small volume at low pressure (LVLP).

An important indicator of the effectiveness of each type is the percentage loss of spray material:

• HP - about 55%;
• HVLP - 35%;
• LVMP - less than 35%;
• LVLP - 20%.

The best gun for thick paint

HUBERTH R500 RP20500-14 for finishing the surface covering different types of paint materials (paint). The device is based on the use of technology LVLP. This allows:

• reduce the consumption of paint;
• create a soft and fine atomization;
• forming a minimum quantity of paint mist.

Structure finishing gun allows to smoothly adjust the flow of the working material to change the shape of the torch, and also ensures the inlet pressure change without sudden surges.

Pros:

• It is used in a wide range of coatings;
• smooth and accurate flow of paint to the work area;
• coating quality is ensured high quality nozzles, the air cap and the adjusting needle;
• the working part of the tool is made of stainless steel, which ensures that no corrosion;
• comfortable process control is provided with a trigger soft and smooth, low resistance, by pressing the trigger;
• change flare shape (round or flat) may provide a single hand;
• the large number of interchangeable sets;
• secure grip handle is provided with a relief surface;
• the presence of a "single" under all nuts key type;
• operating the coating process is characterized by low fire and explosion.

Minuses:

• the presence of the factory grease causes considerable loss of time in the preparation of devices for operation;
• fasteners planted with the large torque or glue - it causes a significant effort when loosening;
• the absence of clear and intelligible for beginners instruction manual.

Characteristics:

Equipment:

• packing box;
• spray gun (gun);
• instructions for use;
• additional nozzle Ø 1,4 mm.

Optional accessories:

• fitting adapter "Mom" or "Dad";
• extension hose.

HUBERTH R500 RP20500-14 product made in Germany (the birthplace of the brand). The manufacturer's warranty on the tool - 6 months.

The best gun for water-based paints

HMAC SB-71 018-2001 used to form coatings of liquid paints and anticorrosion mixtures. Paint applied to an air spray method. The tool is used in the following areas:

• engineering;
• construction;
• Automotive industry;
• living conditions.

Thanks to successful design solutions for coloring device is versatile features:

• deposition of different coatings;
• formation anticorrosive coatings;
• wood preservation;
• Canned products;
• disinfection and decontamination;
• applying decorative mineral aggregate;
• work with stencils.

Air Cap allows you to create different kinds of Torch - it depends on the viscosity of the material used and the amount of paint operations.

Instead of a tank can be used conventional plastic bottles of mineral water or soda. For this adapter is made with a seat.

Pros:

• simple structure;
• wide range of liquid coating;
• the ability to use in industrial and home;
• long service life;
• affordable price.

Minuses:

• offensive physical fatigue when working at arm's length with a fully fueled tank;
• High operating pressure of compressed air.

Characteristics:

Equipment:

• packaging;
• user's manual.

Producer Russia. 2-year warranty.

The best industrial pneumatic gun

Metabo FB 2200 HVLP It designed for continuous operation without interruption. This allows a single form uniform coating with no visible boundaries between the layers of paint.

Application system HVLP (high volume at low pressure) possible to increase the quality of the coating using less starting material.

Work life increased by the use in the construction of metal parts. Slippage tool during painting prevents convenient embossed leather.

Design features of the gun makes it possible to regulate the supply of soft colors. This promotes the formation of coatings with different thickness.

Pros:

• low weight of the tool in its class;
• decrease in total consumption of the starting material, reducing the rebound reverse paints;
• stepless adjustment of the compressed air and the liquid coating;
• stable form of the torch;
• an enlarged tank volume;
• high production quality;
• the possibility of using low-power "amateur" compressors volume of about 250 cm³.

Minuses:

• expensive for domestic use.

Characteristics:

Equipment:

• user's manual;
• additional nozzle Ø 1,5 mm;
• polymer 500 cc beaker.

The birthplace of the brand - Germany. Manufacturer - Italy. The manufacturer's warranty up to 3 years.

Best gun without cistern

SATAjet 1000 K RP 132134 It is used to cover both small and large surfaces preparatory, roughing and finishing coloring materials.

It uses one of the advanced technologies - spraying liquid by RP (upgraded coating high pressure method). This saves ink by reducing paint mist.

The spray gun is used in conjunction with pump or pressure pot with high pressure. Lightness tool promotes cleansing mirror polished nickel-plated external surface.

Pros:

• High-speed discharge of the working material;
• a torch;
• air head is equipped with special channels, preventing accumulation of the paint material in the workflow;
• better flow of the paint facilitate broad and smooth internal passages;
• operating medium supply hose is fixed with a pistol through the Teflon ball valve, or through a special nozzle plug connector;
• rational consumption of compressed air allows the use of a spray device with small compressors;
• working air nozzles are made of brass;
• Paint and nozzle adjustment needle made of stainless steel;
• the outer surface is covered with an additional protective device layer;
• reliable tightness promotes self-regulating air seal;
• existence of an integrated pressure gauge for adjusting the air flow rate.

Minuses:

• high price;
• use only for professional purposes.

Characteristics:

Equipment:

• gun;
• key;
• brush cleaning tool;
• instructions for use;
• packing box.

The birthplace of the brand - Germany. Manufacturer - Germany.

The best gun for painting car

Jonnesway JA-6111 It applies to all kinds of painting works, but is especially effective in car color. The tool is easy to use. Housing and replacement parts are resistant to many aggressive substances in the paint.

It is possible to increase uptime and capacity to apply for jobs with liquids with different aggressiveness.

In the embodiment can adjust the supply of compressed air and paint substance. The feed rate and the flow rate set screws located on the device and in the lower parts of the miter.

Nozzles are made of stainless steel corrosion, which greatly increases the overall resource instrument.

Pros:

• possibility of working with many fluids with different chemical activity;
• application of substances with various viscosity, - primers, protective mastic nitropaint and others;
• It allows the use of all types of paint;
• ideal coating;
• the availability of additional removable nozzle;
• the total efficiency of the use of paint formulations reaches 65%;
• design simplicity, convenience and ease of use;
• It corresponds exactly to the standards HLVP.

Minuses:

• higher (subjectively) consumption;
• expensive for home use;
• desirable case for storage of the tool and interchangeable parts.

Characteristics:

Equipment:

• packing box;
• gun;
• removable nozzle;
• storage tank;
• user's manual.

Taiwan - the birthplace of the brand. Manufacturing - Taiwan.

Best gun for primer coatings and liquid rubber

Liquid Rubber - paint material dries forming a flexible coating. It has high sealing properties and increased viscosity.

It represents a version of mastic on the water-based polymer. Hence the specific requirements for the gun for application of the material.

DeVilbiss PRi Pro It is the best for use with similar types of mastic. It provides a high quality coating on a surface of paint formulations. Designed to meet a variety of grounds, including modern brands.

The tool has a solid body which allows to easily, without changing the adjustment of the needle and the air cap, make change of working nozzles. Thus it is possible to configure the device under a certain kind of material.

Adjusting screws vary the speed and power airflow provide the necessary flow amount of hydraulic spray environment. Air Cap adjusts flame shape.

Key elements are made from durable anti-corrosive metal that can increase the tool life.

Pros:

• possibility of working with a liquid medium different viscosity and chemical aggressiveness;
• anticorrosive coating;
• uniform application of the intermediate and topcoat;
• setting a certain type of paint material;
• easy exchange of the nozzle without having to reconfigure the entire device;
• a small mass in the running state;
• simple and easy to operate in car.

Minuses:

• It does not justify its cost when buying for home use.

Characteristics:

Equipment:

• spray gun;
• storage tank with a top location;
• Universal folding key;
• Torx special device for changing the adjusting needle seal;
• identification rings (set);
• certificate of conformity, instructions for use;
• packing box.

United Kingdom - the birthplace of the brand. Country of origin - Great Britain. Warranty 12 months.

The best low-pressure spray gun

Extremely simple and reliable design MASTAK 671-013C. Convenient to use. It is used with many types of paint. Popular among masters-an auto. Used in conjunction with the delivery equipment of low pressure compressed air (of HLVP system).

The structural feature of the model - the compressed air inlet pressure of 2 atm and a modern spray technology - can create the 0.7 bar at the outlet.

Lightweight forged a robust housing made of metal allows to use the instrument for a long time without repair. Nozzle adjustment needle and made from high-quality stainless steel.

Kit manufactured in addition, will help in the short term to replace the worn seals and release the spring.

Pros:

• simple, handy and easy to use construction; novice master tool in a short time;
• sturdy and durable metal casing;
• economical in operation;
• form harmful turbulence during the working process of applying coatings;
• applying the finish quality and the intermediate coating;
• Working with large list of paint formulations;
• possibility of adjusting the supply of the working colorant and power airflow;
• long operating time;
• additional Kit.

Minuses:

• roads, beneficial only when used correctly.

Characteristics :

Equipment:

• Case for storage and transportation;
• additional Kit;
• spray gun;
• Capacity under the paint;
• a pressure gauge (instrument for measuring air flow rates);
• brush for cleaning the gun;
• key for parsing tool or tightening compounds;
• an additional connector;
• Three additional filter for cleaning coatings.

Taiwan - the birthplace of the brand. Origin of goods - Taiwan.

Best gun from avtokompressora

Feature Caliber KRP-0.8 / 0.12 VB PROS, By operating the gun avtokompressora - low consumption of air (100-120 L / min), the processing time is not more than 2-5 minutes, to the tank capacity of 0.1-0.15 liters.

Hence, the requirements for the compressor: air flow of 60 l / min, the minimum output pressure of 5 atm, the presence of the receiver.. Mismatch power parameters and coating equipment leads to the following problems:

• poor quality coating;
• overheating and failure of the compressor;
• short operating time of no more than 2-5 minutes.

The model is used for the following purposes:

• spraying paint of low viscosity coatings;
• work with templates;
• artwork.

The design allows adjustment of the plume shape, the volume flow of paint materials. Provided a hook for storage on a shelf.

The ribbed surface allows you to securely fix the tool in his hand. The trigger during the workflow is adjacent to the handle, which allows the operator to use only one hand.

Pros:

• low weight;
• low air consumption;
• convenient location trigger;
• possibility of working with small surfaces.

Minuses:

• low power;
• restriction on the covered area;
• short time work.

Characteristics:

Equipment:

• gun;
• storage tank;
• certificate of conformity, operating instructions;
• packing box.

Russia - the birthplace of the brand. Country of origin China. 1 year warranty.