- Than you can wash the cement?
- Chemicals
- Popular methods
Small cement drops, regardless of the cause of their impact on the surface of the car, can be a significant problem for the car owner. In this article we will share with you practical recommendations, than to wash cement from the machine as quickly and effectively. After hardening, the particles of the cement slurry are difficult to remove, without damaging the coating. However, if you follow a certain algorithm, then you can do it even at home.
to the contents ↑Than you can wash the cement?
To remove stains from the surface of the car, you may need the following:
- special cleaning compounds;
- vinegar;
- lemon juice;
- electrolyte solution;
- water;
- car shampoo.
Important! In its structure, cement is an alkaline compound, and therefore any acid medium can be used to dissolve it and remove it from the car. It is important only when cleaning the drops of cement from the surface of the machine, do not overdo it with the solvent and do not damage the auto-coating paint.
to content ↑Chemicals
The most simple and effective way to get rid of complex contaminants on the surface of the machine is to use chemicals with acid composition. Therefore, to wash the cement from the machine, the following methods are suitable.
Method number 1.Specialized tools
In modern car centers, specially developed cleaning compounds are sold to remove stubborn stains from the car. Sometimes these funds are intended solely for processing automotive surfaces, and sometimes universal substances can be used to clean ceramics and other surfaces.
The most popular product is the trademark ATLAS TZOP, which is designed for both tile cleaning and surface treatment.
Use this cleaning compound according to the following algorithm:
- Apply the chemical to the hardened drops of cement.
- Leave the substance on the surface of the machine for a few minutes.
- Clean the surface with a regular cloth shred.
Method number 2.Electrolyte solution
Since almost any non-strong acid is suitable for washing cement from the machine, you can also use electrolyte solution, which should be used as follows:
- In order not to damage the varnish coating, dilute the chemical solution a little before use.
- Use a soft cloth to apply the solution to the surface of the dirt and gently rub it.
- Rinse with plain water.
Important! If after the removal of cement stains on the surface of the machine there are traces, then they can be removed using polishing.
Method number 3.Car shampoo
It will help to clean the surface of your favorite car from cement and aggressive detergent medium with high-density foam. To achieve this, use the following instruction:
- A shampoo is poured into the bucket with water to clean the car from strong contaminants - the concentration should be 2 times the instruction instructions.
- When the mixture has filled about a third of the bucket, cover it with a lid.
- Place the air hose under the cover and turn on the blowing mode.
- After 3-4 minutes, remove the lid - there must be a thick foam in front of you.
- Coat the surface of the machine with an even layer of foam shampoo.
- To achieve a good result, the foam should be on the surface of your car for 20-30 minutes, so when it settles, update the layer of the substance.
- After this period of time, wash with a strong head of water.
Important! If the car still had traces of cement, and accordingly - the desired result was not achieved, then you can repeat the procedure.
to content ↑Folk methods
The answer to the question, how to wash cement from the machine, will help you find some simple, but at the same time, effective folk remedies:
Method # 1.Vinegar
In cities with operating cement plants, residents have noticed that it is possible to achieve cleanliness of the machine by washing its surface with a usual 9% acetic acid solution, which is located in almost every kitchen. In order to easily remove dirt from the paint, use vinegar as follows:
- Use a sponge or a soft cloth to apply a small amount of acetic acid to the cement that is seized.
- Wait for 2-3 minutes.
- Easily remove the dirt with a soft cloth soaked in rags.
Method number 2.Lemon juice
Acid is found in many growing in gardens and grocery stores sold in grocery stores. The simplest solution to washing the cement from the machine is lemon juice:
- Cut a small lemon along into two parts.
- Carefully rub the area of contamination.
- Rinse the acid with water, as a result of which - the cement must come off the surface.
Important! By the same principle, you can use an apple or a solution of citric acid.
Method number 3.Mechanical effect of
If on the body of the machine there are only small droplets of cement, outwardly reminiscent of sand, then you can clean it out with a soft tapping with a rubber mallet. To do this, remove the skin of the machine and with gentle movements knock on the inside, frozen droplets of mortar - they must crumble.
In this article, we shared with you the most popular and effective ways of how to get rid of unpleasant building dirt on the car without damaging the top coat of paint. All of them have been repeatedly used by many motorists, so the effectiveness of doubts does not cause. Sincerely we hope that with the help of these recommendations you will be able to quickly and easily return to your transport the former cleanliness and attractiveness.
