Liquid wallpaper: reviews, disadvantages, benefits, selection, application

To create beautiful and practical interiors use latest finishing materials. They have improved consumer properties. Therefore, their use in practice implies certain benefits. To take advantage of the potential need to carefully consider not only the common characteristics, but also the use of technology. This article describes how the liquid wallpaper. Reviews, disadvantages, with examples of successful projects and other thematic data will help to make the right conclusions about the appropriateness of their use.

What is a liquid wallpaper: the advantages and possibilities of new decorative materials

These articles appeared in the local market a little over 15 years ago. Relatively high prices and complexity of the application became natural limiters wide application.

Nowadays, few people are asking themselves similar questions and sellers when visiting specialty stores. Increased demand contributed to the development of domestic producers and the corresponding decline in prices. As it turned out, the application of the technology is not too much different from working with conventional paint and plaster. In addition to hand tools, it is possible the use of user-friendly means of mechanization.

If you use the exact wording of the liquid wallpaper - is a modification decorative plaster. They are applied to the walls and other surfaces as a topcoat. With the use of such materials the following tasks:

• protect the main structure of the negative external influences;
• remove small bumps and other imperfections;
• create the look with the selected style.

As part of the liquid wallpaper contains the following components:

• a basis of cellulose, cotton, synthetic fibers;
• binders;
• colorants, and other additives to improve the aesthetic and technical parameters.

Note! Specific liquid wallpaper title refers to a single step - the application process. They are supplied in dry form. After drying on the surface, they also do not contain excessive moisture.

Application of liquid wallpaper: Picture in the interior and useful advice

From these data it is clear that the finish surface with such material can be expressive.

A clear benefit is a significant relief. If it is not needed, it is necessary to use the smallest fraction. This makes difficult the processing of raw material, so the finished products are somewhat expensive. It is also necessary to note the following positive nuances:

• The basis of natural ingredients ensures compliance with modern requirements for environmental clean living space.
• Cotton and cellulose provide good thermal and soundproofing.
• These components in combination with a suitable binder to form a damping layer which is not damaged by the blows.
• When applying the composition can eliminate crack and small irregularities in the application of plaster.
• Unlike "Classic" WallpaperIn this case no special difficulties arise when handling angles, complex shaped surfaces, separate architectural elements.
• No seams must also be classified as a distinct advantage.
• If necessary, the damaged areas can be repaired quickly and accurately. For such situations, the owner of calculating reserves a small supply of the dry mixture.

Separately, it should be noted tremendous opportunities correcting appearance, taking into account the design requirements, individual preferences.

But it should be noted the important features of technological processes and disadvantages for objectivity.

Natural materials can spoil the water. Requires pre-treatment of the surface to create a watertight layer. For these operations, some manufacturers offer specialized liquid wallpaper primer. They added silica filler to increase the roughness and improve the adhesion.

It should be dealt with vivid colors and contrast transitions based, so they did not break the look of the cover. If the increased thickness of the decorative layer, will greatly increase the cost, decrease the strength, increase the likelihood of cracking. To provide additional protection against moisture and mechanical damage - from the outside is applied to the transparent varnish.

For mixing the ingredients need mixer. Further use "wet" techniques are accompanied by pollution of the environment. We'll have to master the individual work steps. When creating the individual layers will be spent extra time to dry. However, high-quality fixation traditional wallpaper also not possible without a certain knowledge and skills mastered. Accurate comparison will be done only after a thorough acquaintance with the technology.

The following are examples of the application of liquid wallpaper. Photo interiors grouped according to their intended purpose. This will help to understand the interior decoration features based on their functionality.

The use liquid wallpaper for the bathroom: beautiful and practical finishing

When working with this premise is necessary to pay special attention to the hygroscopic properties of natural materials. It is better to apply structures on the basis of Dacron, other polymer fibers. They are not susceptible to the harmful effects of moisture. These materials do not create favorable conditions for the emergence and development of microbial colonies.

It is necessary to carefully examine how the correct application of liquid wallpaper in bathroom. Reviews indicate that come in handy reliable waterproofing walls. Outside applied several layers of clear lacquer. It is chosen with characteristics corresponding to the conditions for future use. In these areas there is no direct sunlight, so do not need protection paints and other components from UV radiation.

Different variants of decorative liquid wallpaper in the kitchen: a photo of the interior and useful tips

It is also necessary to consider features of the pre-project. liquid wallpapers for the kitchen selected taking into account a complex of negative factors:

• Then the temperature changes frequently and the level of humidity.
• In the process of cooking and other work operations on the exposed surfaces reach fats, resistant dyes.
• Some locations may be damaged by mechanical action when moving heavy objects.

It should be emphasized the high intensity of use of the premises by all family members. This mode of operation increases the likelihood of damage to the liquid wallpaper the kitchen. The review recommended to protect them especially in certain parts of the room.

To extend the life of liquid wallpaper in this place you can close the glass.

Note! Kitchen more convenient to use materials consisting of fines, which form a relatively smooth surface. Handy right choice resistant to external influences finish.

Advantages liquid wallpaper at furnish corridors

In these parts of the useful properties of finishing materials durability, ease of removal of contaminants. The narrow passages can extend visually using light shades. Effective design method with vertical stripes "increase" the height of the ceilings, if necessary. The ability to change the appearance of the coating will receive characteristics corresponding to a particular style, neighboring materials in the total composition.

Ease of design emphasized embedded hidden backlit the contour. It creates the illusion of the floating ceiling. This solution is often used in small rooms with no windows. In this example understood properly holistic approach to the project. It is necessary to take into account all the important components of the decor, coupled with technical equipment, furniture and aesthetics door blocks.

Appearance of various liquid wallpaper: Picture in the interior rooms with comments

In accommodation, useful ecological purity of the finishing materials. Of course, it can be used to advantage, and other positive attributes.

1 of 6

How to evaluate the liquid wallpaper: reviews, disadvantages, benefits, the wording of its own requirements

Before turning to the technology, it is necessary to get acquainted with the views of those who have done liquid wallpaper with your own hands. Guest artists and ordinary users to help better assess the real properties of materials and their suitability for finishing work, the complexity of the application.

Canopus: We covered the walls of cotton liquid wallpaper brands "That's the way." If you decide to put them, you must first cover the walls harboring a special snow-white mastic (Which is much more difficult than to impregnate the primer before the label of conventional wallpaper), that is, to do the double work. We tried to use the compressor, but declined due to terrible noise. Applied using a plastic spatula, but the texture of the wall turns heterogeneous. But the most terrible danger - the ability to draw out these wallpapers from the walls to the surface of any dirt, especially rust. If you accidentally splash on the wall, this place instantly gets wet and almost dripping from the wall ...

More on Irecommend.ru: http://irecommend.ru/content/ne-zanimaites-erundoi-pokleite-obychnye-oboi

Such reviews about liquid wallpaper prove insufficient total project author acquainted with the peculiarities of finishing materials. Natural fibers absorb moisture well, so you need reliable protection on both sides of the decorative layer.

The asterisk in the sky: We stopped on a decorative plaster ART - DECO "Silk - liquid wallpaper" Adorable T 034, costing 620 rubles per 1 package. For us, the most important and the most important factor in buying liquid wallpaper has served this (in fact in the house soon to appear Child): environmental friendliness; the ability to easily and quickly repair dirty or scratched section. All work turned out to make their own hands, as it was the desire to save. We spot is not much to speak. Some - I was able to mask another layer of liquid wallpaper applied on top of the dried. To prevent such troubles, it was necessary to carefully prepare the wall for their application (ie. e. putty and better primed 2 or even 3 times) ...

More on Irecommend.ru: http://irecommend.ru/content/govoryat-chto-s-nimi-pod-ruchku-idet-isterika-da-nesomnenno-ikh-nanesenie-eto-ogromnyi-trud

Olenka72, Tyumen: Liquid wallpaper SilkPlaster - A great alternative to the usual wallpaper

Advantages: Easy to apply, ecological compatibility, and the ability to combine drawing interesting design, ease of care. The most important thing for me was the fact that during their application can ventilate the room, as they are not afraid of drafts. It seems to me that these wallpapers are useful in difficult areas where a lot of angles.

Disadvantages: It is necessary to soak 12 hours

More on Otzovik: http://otzovik.com/review_56400.html

deux, Cheboksary: Advantages: Eco-friendly and interesting material (SilkPlaster), good sound and heat insulation, can be applied to not very smooth walls.

Disadvantages: So expensive, time consuming, it thickens the wall in the junction casings door frames, sockets and baseboards.

When it's time to change the wallpaper in the hallway, we searched a few shops, but could not find a suitable alternative. And then in the same building hypermarkets seller suggested we try a liquid wallpaper. We have seen how interesting they look on the surface of the demo as just apply them, and dare! We have chosen a series of relief - because it actually hides its roughness basics disadvantages. And we have to Khrushchev in the hallway is usually not aligned walls, which was once the oil paint and then several layers of wallpaper ...

More on Otzovik: http://otzovik.com/review_5059385.html

If necessary, the application of liquid wallpaper on the ceiling, pictures and reviews can also be found without much difficulty.

Yenko: Advantages: seamless, clean, level surface.

Disadvantages: For a professional, a little expensive, it turned out that the devils. Embossed plastic float, which we recommend the seller in the same store, where we bought the wallpaper, it is not suitable. It lifted up when applied layer by layer, it is intolerable to work. Out of position, causing a lot of the usual iron spatula for pancakes ...

More on to Irecommend.ru: http://irecommend.ru/content/u-menya-byla-isterika-1

In studying it is necessary to pay attention to all the parameters of liquid wallpaper, the pros and cons. Reviews confirms good environmental performance, excellent appearance. Consumers like the ability to align the surfaces, simplicity repairs. Among the shortcomings often celebrate the manifestation of spots. This underlines the importance of correct and very careful preparation of the surface. Opinions about the complexity of creating high-quality layer also occur. Techniques to eliminate the problems identified are listed below.

Creating unique products: how to make their own hands liquid wallpaper without errors

For personal experiments do not have to unduly restrict the flight of fancy. However, the following guidelines will be useful for the selection of suitable components, tools and supplies:

• In any case, it is necessary to clarify the parameters of the place of application of liquid wallpaper with your own hands. Manufacture of paper - the easiest way. But you may need other ingredients to the special conditions of future exploitation.
• Dyes selected generally water-based. This prevents unnecessary difficulties in the diluted solution can help to maintain good environmental characteristics of the composition.
• It is not necessary to use high-density paper. It will be too hard to grind.
• Ordinary PVA glue (colorless) and gypsum suitable for creating a binder.
• Pre-need to pick up the glitter, other additional decorative elements.
• plastic bowl suitable for mixing with a diameter of 40-60cm and a height of walls 30-45 cm.
• Water does not need to be cleaned unless absolutely necessary. Will be pleased to work with your hands, if the temperature is slightly higher than the air in the room.
• Accelerate the establishment of a uniform mixture helps building mixer - tip on a drill. In the presence of fine adjustment of speed, it will be easier to choose the optimum speed.

The following table describes how to make liquid wallpaper in the home:

Photo	The sequence of actions, the important nuances
	It is necessary to prepare all the necessary ingredients to the mixing container, drill with paddle.
	The least color distortion will be, if you use white paper.
	Its tear, placed in an appropriate volume plastic pail.
	For softening and subsequent grinding - is filled with clean water.
	Once soaked paper (time selected individually depending on the feedstock density), the mixer used.
	Consistently gypsum and add glue PVA.
	Stir until smooth.
	In the next stage of color pour the desired color, mix thoroughly.
	Empirically one can ensure that the mixture was well kept on a vertical surface.
	If necessary, change the number of components to achieve the desired adhesion strength, hue, and other parameter.

Not complicated manufacturing process of liquid wallpaper with your own hands. The proportions depend on the selected ingredients. For example, instead of paper, and is used together with cotton wool, thread cutting, cellulose of the standard insulating materials polyester and flax, and other artificial and natural fibers. If there is no PVA, use the "Bustilat" glue for wallpaper based on casein, acrylic sealer. Decorative components selected independently.

Specifications application liquid wallpaper: 1 sq consumption. m, and other useful data

To refine the selection of proportions homemade mixture will have a slope value and surface quality. If you intend to make the layer thickness, it is necessary to increase the content of the binder components. Under standard conditions for 8-10 m. surface may be prepared using a mixture of the following data:

Note! To prevent the formation of mold and mildew experienced specialists recommend the use of antiseptic agents. Their number is chosen according to the manufacturer's instructions. It is necessary to purchase a tool that is suitable for use in residential areas.

When buying a ready-made product, in the accompanying instructions, see the flow of liquid wallpaper on 1 square meter. Its calculated from 2-2.5 mm thickness layer. In this case take 2-2.5 kg typical dry mixture is diluted with water in the correct proportions, covered up to 10-11 m. area.

Using such equipment is easier to maintain uniform layer thickness on large surfaces, in the treatment of architectural elements with complex shapes. Skilled masters capable of handling 18-22 m. for an hour or more. Newcomer would have to acquire the necessary skills.

How dry liquid wallpaper, also indicated on the package. Typically, manufacturers set a period of from 24 to 72 hours. They do not result in the exact values, but note the impact on the data process the following factors:

• temperature;
• humidity;
• layer thickness;
• ventilation mode.

The last point should be clarified. The fact that the liquid wall, in contrast to the classical paper and non-woven products, "not afraid" of drafts. Can expedite the removal of moisture with good ventilation. Willingness layer of experienced specialists check in a simple manner. If a hand in the finishing coat should not feel the cold from the wall.

The exact calculation for a single room is performed as follows:

• multiply the length of the perimeter at the height of the walls;
• subtract the area door and window openings, decorative plates made of wood and other materials;
• add ceiling area (if they are applied liquid wallpaper.

Correction should be done based on the experience and working methods (manual / mechanized), quality surfaces. By the results obtained it is necessary to add 5-10% as a reserve. It is left dry for repairs in the future. It is better to buy a small factory packaging to extend the shelf life of the dry mixture.

How to apply liquid wallpaper: video, how to apply, step by step instructions

Detailed procedures are given in the following sections of this article. But before exploring the specific application technology of liquid wallpaper, you have to double-check all the important stages of finishing the project.

First, clarify common targets. It is necessary to determine the total amount of work in the apartment, other real estate, as well as finishing features separate facilities. Pay attention to the additional protective measures in areas with high humidity, other adverse external influences.

At this stage, it concludes the acquisition of finished goods, or the need to create a unique blend of their own. Next you need to figure out how to glue the liquid wallpaper, manually or by using a spray gun. It is necessary to purchase the necessary equipment, learn to use the appropriate tools.

On this video, the application of liquid wallpaper with your own hands shows the process of a smooth wall finish in the same room:

However, this information is not enough for high-quality repair of all property. We have to reject:

• preparation of surfaces;
• detailed rules for the preparation and application of materials with different technologies;
• especially applying the composition to the ceiling;
• create complex joints and graphics;
• reconstruction operation.

How to apply liquid wallpaper, it is better to find out in advance. Study and work out the labor movement on small surfaces. Some manufacturers offer free training courses. This is a profitable and productive way to develop professional techniques with the help of experienced professionals.

Thorough preparation - the basis of good results

Photo	The sequence of actions with professional commentary
	Remove old wallpaper. This procedure is carried out carefully, removing glue, small residues of products to layer plaster. If the substrate is difficult to remove, it premoistened with a roller, a porous sponge, allowed to stand for a few minutes.
	It is necessary that at this stage sockets and switches (Without decorative covers) have been installed in the wall. Desirably, the electrical performance of the corresponding system checked. You must exclude the following test (troubleshooting) with the movement of goods in the mounting boxes.
	To prevent the ingress of moisture mixes and all equipment is pasted over the contour masking tape. The upper part of the protective structures are connected, as shown in the photo.
	The same paper tape is used to protect the adjacent decorative surfaces. It should be remembered that primer under liquid wallpaper used in concentrated form. Its member aggressive chemicals can damage wood, plastic and other details.
	Film cover large surfaces.
	Along the perimeter of the floor covering is very close to the wall is fixed a protective layer with masking tape.
	Ceiling Construction liquid before applying the wallpaper to be installed completely finished and built-in lamps.
	As noted above, the primer liquid wallpaper used in concentrated form. Select compounds with water-repellent properties, which are able to create a quality layer waterproofing. Not suitable impregnation, strengthening and other modifications.
	Acquired the primer is poured into a plastic tray. Undiluted, it is applied to the surface. 2-3 creates protective layer using the drying time specified by the manufacturer. Especially carefully treated areas that have been damaged by mold, fire, water.
	Is treated sequentially with portions of 1-1.5 m sq. This barrier is a two-way. Without priming water from liquid wallpaper is able to penetrate into the wall to a depth of 10 cm or more. Similar negative processes in reverse violate the integrity of the decorative layer is formed on its outer surface unsightly stains.
	In this apartment - smooth concrete walls. Here putty only minor areas where minor defects were detected. On such surfaces can be applied to liquid wall without prior plaster.
	In this picture it shows that the chalk removed from the concrete base by mechanical means. The right is just such a technique. If you wash it with water, dirt get inside the building structures. Subsequently they are pulled back, degrading fixing finishing layer.
	Corners and other hard to reach areas are treated separately using a paint brush, and other appropriate tools.
	The assortment of specialty stores have a primer with color components. This is useful at the stage of applying the composition, since the visible area of ​​treatment. However, the corresponding distortion can be seen through the layer of liquid wallpaper that distort scheduled aesthetic characteristics of the surface finish.
	If the bathroom has a suspended ceiling, the area around it is treated first with a brush, and below - the roller is used. Between the application of the individual layers must endure gap of at least 12 hours.
	Wash painting tools in these free slots is not necessary. They are placed in a sealed plastic bag, and the next day - is used for its intended purpose.
	For the application of the upper protective layer changing tool, set the new roller.
	This procedure is performed with the use of acrylic paint, which is designed for facade work.
	It is well fastened to smooth surfaces, prevent color distortion, forming another protective layer.

Note! Preparation of walls under liquid wallpaper - it's accurate, but at the same time and the creative process. In the presence of large irregularities decide on the plaster walls. If after one coat of paint visible stain is applied another. The main objective is to provide a smooth, waterproof monochromatic surface with sufficient adhesion for the application of decorative coating.

Apply the correct liquid wallpaper how to put on the wall, video and description techniques

Photo	The algorithm
	This material - a real find for those who do not want to deal with swellings, carefully adjust the individual elements making slot outlets. These features are characteristic of the technology works with conventional wallpaper. But in this case also there are rules that must be followed to obtain good results.
	Wallpaper application liquid for the walls facilitates the creation of high-quality decorative coatings in the presence of corners, projections, and other complex elements architectural designs.
	Upon completion of the surface may proceed to the main process. Advance purchase necessary supplies, tools and accessories.
	To prepare the mixture charge plastic bowl with water (temperature of +30 ° C to + 35 ° C).
	If the package has sequins, or other additives, they fall asleep again.
	Then - the rest of the contents.
	The material was stirred by hand or using an electric drill. It is necessary to carefully use power tools to avoid damaging the structure.
	The plastic mixture is applied with a trowel.
	Tool holding at an angle to the plane of the wall. Surplus materials with corners cut with a knife when the wallpaper dry.
	When the surface is formed, dipped in water trowel smooth roughness and irregularities.
	Liquid wallpaper dry for 2-3 days, and the drafts they do not hurt. Residues of material does not emit.
	If the coating will be spoiled during the operation, it will be possible to delete the relevant part of the pollution and to use the stored stock to restore appearance.
	Of mixtures of different colors, you can create drawings.

The Internet is easy to find specific instructions on how to glue liquid wallpaper on the wall. Video demonstrates the features of the material basis of which is the thread.

Similar clips offered by some manufacturers. There are described methods of applying the corresponding products.

For finishing large areas are also used liquid wallpaper. How to apply them to the wall using the nebulizer shown in this video:

To avoid errors when playing this procedure, use the following guidelines:

• Not suitable home a vacuum cleanerThat creates a little pressure. To perform the work necessary to buy or rent a compressor with an air supply of 170-220 liters per minute and the receiver of 15-25 liters.
• Hopper (spray gun) selected top-loading. The required diameter of the nozzle is determined taking into account the specific characteristics of the mixture.
• Pre create thin layer. After a short break - finishing.
• Typically, the master mixture was used in the liquid cream consistency.
• For obtaining a surface with a fine texture, after application of the liquid plaster gun using a paint roller.

Features of the application of liquid wallpaper on the ceiling

Surface preparation is carried out on the same technology as the walls. But in this case it is necessary to pay special attention to the parameters of adhesion. The liquid wallpaper for the ceiling by their hands, add glue. When buying a ready-mix need to clarify the purpose of the finishing materials from the seller. In the presence of depressions in areas of reinforced concrete slabs docking preferred are large fractions that conceal irregularities.

It is necessary to carry out the established rules of the manufacturer, with stirring, liquid wallpaper. As applied to the ceiling of the finished composition, described below:

• Begin from the window with a gradual movement within the room.
• Create small individual sections small trowel, then connect them to the base layer. This method is long and difficult, but it allows you to get good quality.
• To finish the alignment surface charge larger trowel. It should be used without delay, until the mixture is too dry.

Please find detailed video as glue liquid wallpaper on the ceiling:

How to remove the liquid wallpaper on the wall: high-quality repair of premises

Photo	Actions and useful advice
	Using pure water and roller to uniformly wet the surface.
	Carefully handle all of the selected area, adding liquid as necessary.
	Dale with the trowel remove softened liquid wallpaper. Great efforts should be made not to avoid damaging the surface of the substrate.
	do not discard the footage. This is quite a high-quality blend, which can be recycled.
	Master demonstrates that for subsequent application onto the wall provided qualitative binding.

This example illustrates the advantages of the material during the restoration and installation. The following material provides greater detail on how to remove the liquid wallpaper on the wall:

Opportunities for the implementation of design ideas: liquid wallpaper decoration

Collected in this section information will help better prepare for the implementation of creative ideas. In order not to waste time and money in vain, should learn to work with a designer software. Fit even standard graphics editors. These tools create a realistic three-dimensional models of buildings in electronic form. These tools are useful for a quick check, colors, textures, matching other aesthetic parameters. When the preliminary design of the project is ready, you can begin to search for the necessary components.

Necessary preform can be done independently by choosing appropriate material. small drawings create using simple office printer. Large image transferred to the paper base using a plotter. Relevant services are provided by printing companies, printing shops.

Can I paint liquid wallpaper? The question is not quite correct. In a typical execution of the mixture after drying moisture can be spoiled. In the previous section of this article describes what water perform the dismantling of old coats. Paint and other liquid formulations able to penetrate inside a disruption of the structure and appearance. It is better to add them to the composition mixing step. If absolutely necessary, there should be a practical experiment on a small area. If the result is satisfied - go to finish the entire surface.

To the question "Can I hang wallpaper in the liquid wallpaper" to give the correct answer is easy. For this case is suitable chain of reasoning set out above. Layer created on aqueous basis, lose strength when wetted surface.

Improve protection against adverse external influences by a lacquer liquid wallpaper. Choose suitable products of this category based on the technical parameters of the layer of liquid wallpaper. Particular attention must be chosen nitrovarnishes that contain harsh chemicals. Suitable acrylic and other compositions, specially prepared by the manufacturer for application to paper, cork, cellulose.

What Colera for liquid wallpaper can be used

These additives are used quite frequently. They help create a liquid wallpaper with the desired color hue and saturation. Using factory products, only dilution with water can be used. However, this technique has an influence on the consistency of the mixture.

For the experiments, or use ready-made white liquid wallpaper. Masters advise gradually added in a small amount of dye mixture to obtain the desired concentration. We should not forget that after drying a shade change. Therefore, to obtain the ideal result create a few test sites with notes about the amount of added ingredients.

When selecting these products in addition to the color check:

• Long service life;
• resistance to fading and other external influences;
• affordability;
• manufacturer's warranty.

Some vendors offer a computerized shade selection and training of the individual dye composition. Such a method is more expensive than purchasing a standard product, but it has a high accuracy.

Creating high-quality pictures liquid wallpaper on the wall: a photo and important technological nuances

These pictures show the potential of decoration technology using materials in this category.

Note! Tools are selected based pattern parameters. Small trowel suitable for use with small elements with sharp corners. Big easier to work when creating straight lines, large parts of smooth curves.

1 of 5

On the Internet you can find different pictures liquid wallpaper. Decorate the walls with his own hands, not only to save money. This technology allows you to be creative talents, it helps to create a really exclusive interior at a reasonable cost.

The correct choice of liquid wallpaper, the cost of professional finishing services

A careful study of current market offerings will pertain optimal supplies. The following table shows how many are liquid wallpaper on a certain date. Of course, over time the figures change. But these data will be useful for comparative analysis of similar products from different manufacturers:

Brand / Product, name	Illustration	Area treatment with a packaging 1, m.	The cost of the package liquid wallpaper, rub.	notes
SilkPlaster / Rekoat 2		7	1150-1250	Base - of quality wood, standard wear resistance, smooth structure.
SilkPlaster / Victoria		3-4	920-980	Liquid wallpaper Victoria has large relief, well-defined granularity.
SilkPlaster / Victoria Du Monde		4,5-5	6020-6300	Special design collection.
Bioplast / 2592		2,5-3,5	1120-1360	The pulp with the addition of silk fibers.
Silkcoat / ASPENDOS 1		3,5-4,5	1800-1930	Multi-colored pattern with an expressive relief.
Silkcoat / Elite		4-5	2100-2300	The particular texture of liquid Silkcoat wallpaper formed thick silk threads.
This is how / 1202		3-4	500-540	Basis - natural cotton.

It should be noted that only examples are given table. The actual range of each of the brands is much broader. In the catalog of liquid wallpaper BioplastFor example - dozens of different hues. In each of the main series have all kinds of modifications that have been created using different callers, sequins and other additives. Persist unchanged in such subsets only general characteristics which define the parameters of the basic materials and binders.

Do not make hasty conclusions without a full list of current offerings. Thus, liquid wallpaper Optima (SilkPlaster) sold at a price of 580-610 rubles. per pack. This fact allows us to make sure that the quality products of famous brand is quite possible to buy at affordable cost.

If you want to save, you can buy liquid wallpaper in the online store cheap. In these shopping sites are no exhibition halls, cash registers, the contents of the large states and other associated costs. Liquid wallpaper SilkPlaster buy one get quickly delivered to the right address. Details of each product are not difficult to get on the official website of this or another manufacturer.

It is necessary to correctly calculate the total costs when choosing a liquid wallpaper. Price per square meter when creating a decorative layer of a professional team strength is 250-700 rubles. These figures include the work of primer and use mixture. They are comparable to the cost of the most inexpensive materials in this category. The cost of liquid wallpaper - this is a small part of the economic calculation. It is necessary to include all working operations, supplies, tools, equipment.

Related article:

If you choose Wallpaper for walls, photo catalogDiscussed in this article will help you choose the appropriate option for a particular interior from the variety of choices on the market today.

conclusion

A careful study of liquid wallpaper, reviews and disadvantages, real advantages and features of the application will help to make the right conclusions. For more accurate results it is necessary to properly assess their own capabilities, free time. If necessary, you can use the services of specialists. Even in this case, the useful knowledge gained about processes for scrutiny. You should check the current state of the market, especially the characteristics of modern building materials in this category. Do not forget about the boundless possibilities of individual creativity.

Join the discussion on this topic. Share experiences with liquid wallpaper. Leave comments and ask questions on the use of products of different brands. Constructive dialogue will help solve the most difficult finishing the questions correctly, without the expense and worry.