With the help of a garment steamer ironing can perform right on the hanger. The device consists of a water tank and a steam generator. The fabric during processing is not in contact with hot surface, in the case of iron. From the effects of a couple of the material does not shine and does not fade, retaining its original state.
Steamer and steam generator iron with smooth things in the upright position. This is the only thing in common. Steamers easier to iron due to hose length, mobility and lightweight handpiece. Not all irons can be used for cleaning textiles. At the same time, without the iron impossible to form arrows on trousers and ironed linen made of cotton or linen.
Steam cleaner designed to clean different types of surfaces dry steam, which is fed under high pressure.
He brings difficult stains, dirt, cleans mold, bacteria and fat layers. It creates a powerful flow of steam to work on different planes and surfaces.
Otparivatel creates wet steam, only works in vertical position, clean textiles and eliminates unpleasant odors. Functional steam cleaner steamer, but more expensive, larger and is used mainly for cleaning the room.
Advantages and disadvantages
The device is easy to steam a shirt for a few seconds, but you can not make the arrows on trousers. You can pick up the clips for trousers, but responses indicate their uselessness.
Conveniently iron hanging curtains, refresh clothes or blanket to spread. The device removes stains and limited soiling without washing removes mustiness, mold and cigarette smoke. In complex cases steam iron inveterate first spot, and then wash item in warm water without special tools.
Benefits:
- Use upright facilitates ironed curtains;
- working with delicate fabrics, fine and complex texture without harm to things;
- cleaning, removal of odors, disinfection;
- no need for an ironing board;
- capacious reservoir for water.
Disadvantages:
- can not crease and arrows;
- at low power can not cope with the harsh natural fabrics;
- not provided for in the horizontal position.
The device and principle of operation
The design of a standard floor model steamer:
- a reservoir for water,
- coat rail for clothes,
- hose,
- utyuzhok.
Boiler as Tan reservoir located within the housing. The water is heated, vapor rises through the tube and penetrates outwardly through the openings in the nozzle.
The kit may include:
- one or two hangers;
- extender tube hose;
- ironing boards for the collars, cuffs and pockets;
- brush for textile items;
- utyuzhok;
- clamps ironed arrows;
- heat protection mittens and other accessories.
Many models are fitted with nozzles for adjusting the power, direction and a pair of jet configuration. Multifunction steamers to iron all kinds of fabrics, refreshing, clear of pollution and eliminate things from unpleasant odors.
Classification
Steamers are divided into 6 types:
- self-flowing and work under pressure;
- floor and hand;
- simple single-function and versatile.
Hand
This gravity flow device resembling an electric kettle. It has a small size and weight. These models are easy to transport.
Handmade garment steamer can not cope with thick linen and cotton fabrics, but easy to smooth out fine synthetics and natural things. Models have a small reservoir of water, so the operation usually takes up to 15 minutes. The device is characterized by affordability and versatility.
Floor
Floor models are larger. They are inside the housing with a reservoir, to which is attached a long hose and racks, hangers. Kit is complemented by tips.
Devices smooth strong creases and straighten dense tissue. They have a high capacity and operate continuously up to 2 hours.
Under pressure and gravity
Water when heated turns into steam, which, without additional acceleration exits the tank naturally. Steamers that operate under pressure, has a valve. It retains the steam until it reaches a certain pressure. The valve opens automatically and the intensity of the flow. The steam penetrates the tissue and smoothes the fibers.
In most models, steam supply pressure lasts a few minutes. The devices have a high cost compared with a gravity. There Garment Steamer model with a pair of continuous-feed under pressure. They come in a set of universal steam generators to the pump.
Multifunctional and conventional
Only ordinary steamer to iron things in the upright position. Multipurpose devices:
- model of the steam and the steam cleaner strokes and eliminates pollution from different types of surfaces;
- steamer and steam with an iron is used as the iron is a steam iron and a steamer;
- a combination of iron, steamer and ironing board assumes attached to the housing board for ironing.
Universal Garment Steamer device more simple, but the price of all devices receiving the one below purchased separately.
How to choose
Ironing clothes and freshening is better to buy a compact device of simple construction. For a more versatile use is better to buy a powerful and reliable machine with additional features.
Power
For this indicator, the model is divided into two categories:
- Devices with output power of 1800 watts. This universal model to smooth out all the tissues, which are used extensively in the home or in the professional sphere.
- Models power to 1800 watts. This home appliance is not cope with the down jackets and jeans, but will smooth light fabrics.
The pressure and steam
Intensive steam helps to remove dense and coarse fabrics. The optimum pressure of from 3.5 to 5 bar and the power supplying steam of 35-40 ml / min. For professional device best steam supply rate is 55 ml / min.
Water tank volume
The volume of the reservoir determines the duration of use of the device without the addition of water. With a large volume of devices have large size and heavy weight. In domestic purposes enough tank volume of 1.5 liter per 2 hours of continuous operation. In some models, the water can be refilled during ironing.
Before using the instrument read instructions to the requirements in the water used. Some models work with expensive bottled or distilled water. The devices are expensive have filters for cleaning tap water. Garment Steamer these tanks must be periodically cleaned of scale.
modes of operation
Steamer operates in one mode or has several of them. Last regulates the level of steam saturation. Such a device is needed in the studio and for home use singlemode sufficient steamer.
Material ironing sole
Sole ironing should meet the requirements:
- good glide on different types of fabrics;
- high strength and resistance to damage.
Ironing is made of plastic, ceramic and metal. Ceramic and metal, as a rule, more reliable plastic. The sole must have a plurality of evenly spaced holes for steam outlet.
cost of
Price range is allocated by the level of characteristics:
- power;
- pressure and velocity of the steam;
- ironing of different species;
- several modes;
- protection against overheating and scale formation;
- security;
- additional functions;
- clothes hangers;
- additional accessories.
What to look for when buying
When choosing a device to vote his main qualities:
- security;
- power;
- volume of the reservoir;
- feed rate and steam pressure;
- water quality requirements;
- modes of operation;
- stability and strength of the hanger;
- ironing material.
Accessories. Desirably, the kit includes clamps for forming arrows brushes for cleaning clothes ironing plate collars and cuffs, thermally mitten. When buying floor steamer choose a model with double rack for clothes.
The length of the hose. The longer the hose, the more convenient to use the device. If ironing is no additional PETN, choose a model with an average hose. This steam hose will not have time to turn into a condensate.
Dimensions. small device is easy to store. If the installation is planned in the hallway or a small pantry, choose a small wide model.
Protection against the formation of scale. In areas with hard water is better to buy a model that involves the addition of distilled water. If the water hardness is small, you can select the device with a softening filter.
Before buying a steamer, test and check with the seller to purchase spare parts and accessories. Most models operate from the mains, and some of the batteries.
Review of popular models
Kitfort KT-910
Vertical steamer with output of 2 200 W. easily ironed synthetic things with winter jacket and sequins. The device is ready for use a minute after power-up. Tank capacity is 1.8 liters. The average price of 7 thousand. rubles.
Benefits:
- auto shut-off;
- high power;
- long hose;
- water level indicator.
Disadvantages:
- a short power cord;
- uncomfortable tight clothespins.
MIE Piccolo
Hand garment steamer with a tank volume of 0.5 liters and 1200 watts. A small device in the form of a kettle for vertical ironing and boiling water. To transform enough to change the black nozzle ironing on the spout. The instrument iron bruising and wrinkles, eliminates odors and freshens clothes. The average price of 2700 rubles.
Benefits:
- steam feed rate 40 g / min;
- continuously operates to 15 minutes;
- complete plate for ironed collars and cuffs, brush, heat-resistant mitten;
- turn-off in the absence of water;
- low cost.
Disadvantages:
- rapid water flow;
- a short power cord.
SC 4 Premium
Horizontal steam cleaner with a plurality of nozzles cleans surfaces without any detergent. The kit includes a nozzle for washing floors on a movable joint. The average price of 24 thousand. rubles.
Benefits:
- capacity of 2 thousand. W;
- Water Tank 0.8 liters;
- long cable;
- pressure 3.5 bar with feed rate of vapor of 110 g / min;
- protection of children.
Disadvantages:
- hose is twisted;
- high price.
MIE Magic Style
Professional steamer with a tank volume of 1.7 liters and a dual counter-hanger. Includes iron is to form arrows and ironed problem areas. The average cost of 16 thousand. rubles.
Benefits:
- high power;
- utyuzhok;
- a large water tank.
Disadvantages:
- big size;
- high price.
Before you choose a steamer for home, determine the features you need and read the reviews of real customers. To make the right decision, consider the free space in the apartment and the method of storage of the device.