Extractor hood for the kitchen without removing the vent: advantages, disadvantages

Extraction without duct usually equipped with two filtration levels. The first is a mesh filter mounted in the air intake to which the fat particles are deposited. The material for its manufacture is aluminum or stainless steel. At considerable pollution grid can be removed and washed in running water. The second layer provides a fine filtering, and may consist of:

1. Acrylic reusable liners that carry hand washing.
2. Disposable paper, padding polyester or fleece.
3. Carbon filters, which keep the products and burning, and most of the odors.

Advantages recirculation models

Extractor hood for the kitchen without removing the vent is not only easy to install, it is still great in those cases where the ability to output to the ventilation is limited or non-existent. Examples include the old high-rise buildings where the ventilation shaft common to several apartments. In this case, the flow aid can create inconvenience for the neighborhood. Circulation analogue eliminates such problems. Its advantages are:

• simplicity and efficiency of the installation;
• savings in installation costs;
• Free ventilation grille retains the natural ventilation;
• heat retention in winter.

circulation cons

In terms of ease of installation, often want to choose a hood without air. But before the final decision, in addition to the advantages, you should become familiar with its minuses:

• extract with cassettes without a pipe requires more careful and frequent maintenance;
• the availability of replacement parts increases maintenance costs;
• Performance extractor with filter without removing inferior analogs, losing cleaning elements on up to 50% power;
• by noise such models lose flow to competitors;
• inability to remove moisture - removing equipment is limited fumes, odors and grease particles;
• a relatively limited range of shapes, sizes and designs.

advantages of installation

Install a hood much easier. Tracing duct or corrugated pipe to the vent hole column is not necessary.

enough:

1. Select the required installation space depending on the design type of the hob or cooker.
2. Carry out fixing markup.
3. Drill the necessary holes and secure the unit with the provided screws in advance.

After that may be included in the network device and tested for proper function. Having passed all the stages, you can proceed to the full operation of the device.

care Features

Hoods for the kitchen without removing the vent will require more attention. The main problem brings the need for regular cleaning or replacement of filter elements. Disposable inserts need to be changed every time a new one. Acrylic, aluminum and coal cleaners need to be washed. Depending on the type of item you need to clean off once every 3-6 months. To understand whether the wash, the filters need to examine enough.

Manufacturability models are equipped with filters filling indicator, which serves as a trigger signal the need to replace or clean. Features of the service is always written in the instructions for each specific model.

How to choose

To extractor to the kitchen without air optimally fit into the specified conditions and to maintain the necessary level of functionality, it is important to approach the selection. To do this, you need to take into account the design of the design, its performance, brand reputation, and other properties.

The selection process is recommended:

• Pay attention to the performance or speed of air cleaning in the room - it is calculated by multiplying the amount of food on the average level of air purification of 12.
• Rate set of features and levels of treatment, to select the most important ones, in order not to pay the extra.
• Choose the design of the device and the type of installation to preserve the unity of kitchen design.
• Consider cleaning elements - with occasional use of aluminum plate is sufficiently versions and cooking require frequent and more reliable high-capacity coal cassettes.
• Check the unit for noise - it is better that it did not exceed 50 dB.

Popular models and brands

An important condition for a successful choice will be a reliable manufacturer. Little-known brands are advised not to give preference, in spite of the attractiveness of the price. Extractor hood with filtering and without the duct from the famous manufacturer - a reliable guarantee of uptime. Among these brands are often mentioned:

• siemens;
• bosch;
• Kronasteel;
• Hansa.

Siemens LI 28031 IX

Built-in version with an optimal set of functions for a small kitchen. Reputation known German brand is sufficient to guarantee high quality and durability. Adapted for silent fumes outside, fairly functional in its price segment.

Pros:

• compact;
• three high-speed mode;
• Two fat cleaner;
• comfortable and bright enough light.

Minuses:

• the third mode works quite noisy;
• to turn on the light you need to push the panel, making hood itself is included;
• when installing hard screwed screws.

Bosch DHU 646 U

Budget version with hanging installation. It can work in the branch and loop modes. For lighting used halogen lamps that consume a minimal amount of electricity. Grease filters can be easily removed for cleaning.

Benefits:

• acceptable for the segment power and performance;
• A slider receiving panel design;
• grease cleaning system;
• twin-engine design with three speeds.

Serious deficiencies were noted positive feedback from users.

Krona Lana 500 White

One of the cheapest models with good functionality. Trademark less well-known than the German competitors, but quite popular and reliable.

Advantages:

• maximum availability;
• the ability to combine recycling with a tap;
• good performance;
• effective air filtration in the kitchen.

Disadvantages:

• a few old-fashioned angular design;
• slightly increased noise.

Hansa OSC IH 6060

Another embodiment economical hoods dome arrangement and to operate silently in the ventilation trunk. Famous Trademark provides a perfect assembly and a long service life.

The advantages include:

• decent power;
• a good level of cleaning;
• ease of operation.

Minuses:

• noise;
• lack of intensive regime;
• Use as illumination of incandescent lamps.

Before buying exhaust art will also consider the frequency and intensity of the cooking. Circulation models can not cope with the abundance of fumes, and other results of thermal processing products. Therefore, modern recirculation option often works on the combined scheme, in which it is possible to arrange removal.