Fans of the original design decisions should definitely please sloping hood 60 cm. She not only decorates the kitchen facilities Interior unusual design, but its design is convenient to use the stove, regardless of the owner's growth.
Furthermore intake panel tilt with respect to the horizontal plane, sloping hood is almost indistinguishable from other peers. It is the same as competing models, may be formed in the circulation and / or flow variants. With a combined scheme of its structural elements include:
- an electric motor with a fan;
- various filter system with multiple levels of air purification;
- additional functions, controls, complexity and adaptability of which depend on the cost.
design advantages
Usually sloping hood features a high power and performance. It is connected to operating features: the air is drawn into the natural process of lifting up, without excessive power consumption. More powerful engines, efficient filters, together with the angular position of the air intake, cooker hoods make an excellent choice with a host of other advantages:
- they are easy to install, does not restrict the use of a number of specified hanging lockers, allow to freely open their doors;
- increased efficiency of air makes it easier to remove from the room and smells unpleasant evaporation even in comparison with the most potent analogues of other types;
- advantage of ventilation results in savings in electric power which becomes noticeable with frequent use apparatus;
- use of more advanced electric motor reduces noise, gives them the maximum quiet operation compared to other types of models;
- design features provide easy installation that does not require special skills and complex set of instruments;
- such devices are more ergonomic, they are comfortable when working near the stove, and create conditions for easy access to the entire space of the hob;
- Thanks to modern design and a wide lineup looks great in any kitchen interior.
Operating principle
Inclined extraction system for the kitchen are oriented to the use in the branch version. The installation requires a connection sloping hood with access to the kitchen ventilation shaft. In this mode of heat treatment of products derived from the inside out without the use of a filtering system. Recirculation cleaning method is used as an auxiliary in the absence of connectivity with ventilation, and in other similar cases. Here the air is moving in a closed circuit passes through the air intake on the filters, cleaned and returned to the kitchen area.
For maximum cleaning, these devices have a two-stage filter system, which consists of the elements carbon and fat. This eliminates the flow of fat slurry, various steam and odors.
When buying, you can search for separate shunt and recirculation model, but most of today's models have combined design, which is convenient from an operational point of view.
mounting Features
It is considered that the installation of the sloping hood is straightforward. This is partly so because the design features allow you to set the device solely as a wall. Wall mounting scheme is rightly considered the most simple, dismantling hinged furniture is limited to remove the door. Before you install the appliance, you need:
- To identify the place of installation.
- Pick up a set of tools and consumables.
- Run Wizard markup.
The important point extraction equipment in the kitchen with his hands is a connection to the ventilation shaft. At a short distance from the attachment to "vent" it is recommended to use corrugated aluminum.
A large distance requires laying rigid PVC duct. In both cases, the need to open the exhaust port and set it under the grill with a flange or corrugation duct. When a channel is prepared, fixing holes are drilled, the inclusions to the outlet is determined, it remains to fix the device on the wall, and test operation.
Criterias of choice
Efficient operation of the kitchen hoods inclined largely depends on the proper selection device. Mistakes made at this stage can make the acquisition device useless. Therefore, in addition to a set of functions and other characteristics, it is important to keep in mind the following parameters:
- performance,
- front width,
- height of the unit.
level of performance
Such devices should have a capacity corresponding to the volume of the kitchen. This refers to the cleaning of a certain amount per unit of time. This correspondence should take care before buying equipment. If the unknown dimensions of the room are easy to calculate and vymeryat. It is more difficult to determine the required level of performance. It can be determined by multiplying the amount of space in the average air exchange, which is considered to be equal to 12. In low performance apparatus can not cope with the cleaning air will be ineffective, even at elevated speed conditions. Oversize parameters lead to excess power and the working life.
Edge Width
Like other types of exhaust equipment, such a model is chosen according to the width of the plate or hob. Dimensions define the art on the front space from which evaporation will be collected. If the air intake would be already in the hob, the equipment will not be able to collect the entire volume requiring treatment. To work in tandem with the plate in standard sizes is the best choice sloping hood 60 cm in the front. Models lesser effective width with narrow slabs. Broader device 90 cm, suitable for non-standard solutions.
installation height
This is another important parameter marker for the correct installation. Suction devices should have dimensions which do not prevent them to establish an optimal distance between the lower edge of the air intake and the plate surface.
When it comes to electrical stove height can be 60-75 cm, gas panels require greater distance from 70 to 90 cm. Placing too close to the heat source may damage the structure due to heating.
Popular brands
Today inclined extraction systems produce all known brands, whose products are well-deserved reputation in the market. Among them, the old, famous brands with sales history of several decades:
- German Bosch and Siemens;
- Swedish Asko;
- Slovenia's Gorenje.
Good quality and functional models offer market newcomers that joined the competition for the consumer only at the turn of the century:
- Russian Elikor,
- -German Kronesteel,
- Ukrainian Eleyus.
Of course, the choice is made to your taste, to suit your needs, but do not succumb to the temptation and take the devices from unknown brands. Such devices may be sold as sverhtehnologichny and durable at a price significantly lower than the brand. Most likely it is just a marketing ploy, which stands for mediocre assembly and extreme insecurity.
