Styler - is a modern curling hair curling. Styler works in a sparing mode for hair than and different from the usual curling. This is facilitated by new technologies in the design of the device.
To keep your hair healthy and make the hair more resistant manufacturers improve the design of the device. Such changes include special cover plates:
Functional
In styler advanced options, in comparison with a simple curling. Among the useful features:
- Thermoregulation, which prevents overheating of the strands. In addition, you can configure the optimum temperature.
- Blowing a jet of cold air, which does not allow damage to the hair.
- Ionization makes the hair smooth and silky.
With this technique complete supply different nozzles. For example, hairdryer, brush, rectifying plate, tongs for corrugating and others.
When used properly, the styler hair retain shape longer, and his hair will remain healthy. To do this, you must first make a blow-dry brush, prepare to work styler.
Pre-laying
Regardless of the device model, prior to the treatment condition of the hair must meet the general requirements. They must be:
- Wash thoroughly;
- completely dry;
- Apply mousse evenly distributing it over the entire length;
- treat balm, fixing hair and protects it from overheating;
- for the convenience of curling brush to lift the strands from the roots;
- Secure the top strands clasp.
preparation curling
When you are ready to wave, you need to prepare styler in the following sequence:
- Connect to the network, better without the extension, and if the device has a built-in rechargeable batteries - turn on the power.
- Set the desired temperature.
- If the device provides light indication, it is necessary to wait until it stops blinking. Only then can you begin to create hairstyles.
Performing curling
there are general guidelines that are common to most models for high-quality curling styler:
- a strand width of 3 cm is clamped between the plates;
- the free part of the strand is wound loop, and held for 3 to 5 seconds;
- action is repeated on each strand of the face to the back.
Changing nozzle with temperature control, can be made large or small curls:
- if the temperature is from 130 to 150 ° C, and the hinge is screwed to the large nozzle, they obtained large;
- if the loop is placed on the nozzle with a small diameter at 180 ° C, tight curl and small rings.
With styler you can change the direction and slope paving, to adjust its length, holding the strands from the middle or from the root.
How to use the styler on the example of Babyliss
Among styler popular model of Babyliss Pro Perfect Curl. With him styling done fairly quickly, there is an automatic winding strands. You can also choose the shape and volume of curls. The security apparatus of the closed chamber and ceramic rotating cord.
Among the convenient options have the option of selection:
- Temperature.
- Time wave.
- Its direction.
The indicator light will beep on the device ready for use, and a beep will monitor the curling process.
heating mode
On the control panel Babyliss is the lever, which allows you to set the desired temperature.
| t ° C | hair type |
|---|---|
| 190 | thin, brittle stained |
| 210 | normal |
| 230 | thick, curly |
Time
By adjusting the heating time of the strands with a sound signal can be given a curl shape.
| Time (S) | Signal (Number of times) | Shape of the Lock |
|---|---|---|
| 8 | 3 | soft waves |
| 10 | 4 | light wave |
| 12 | 5 | big curls |
direction of curls
The switch allows change the direction of a wave from a person or a person with the ability to automatically select the device itself.
| symbols | Direction | laying (on behalf of) |
|---|---|---|
| L | left | From the left side |
| R | right | on the right side |
| A | auto mode | automatic selection of destinations with the most natural results |
recommendations
To properly perform perm Styler Babyliss, follow these recommendations:
- ceramic chamber must be deployed to a person designated by third-party manufacturers;
- the width of the strand should not be more than 3 cm;
- it should be located exactly in the center of the heating chamber;
- after installation you need to lightly beaten hairstyle hands or brush.
Sound signals allow time to react incorrectly matched to the width of the strand or its correct position in the chamber.
At the conclusion of each curl perm machine will signal four quick succession. After that you need to release the lock, and repeat the procedure with the other.
Care
In the process of stacking the heating element and the inner wall of the chamber and deposited residues mousse balm, which must be removed. Cleaning is carried out with a brush that comes in the kit. To clean the camera is necessary:
- moisten the cleaning surface with warm water and soap or detergent;
- insert the brush into the camera for the whole course of the depth;
- circular movements to clean the camera.
Before reusing Babyliss need to make sure it is completely dry.