Ironing to pass quickly and efficiently, without the iron steamer enough. By using this function, make sure of the quality of water in the tank for a long service life of the device.
To understand what kind of water should be poured into the iron will help information about its quality.
Boiled tap water even after sedimentation - worst-case scenario for iron. Use it for the steamer and steam prohibited. The precipitate clogs the holes on the working surface of the appliance and causes it to break.
It can be filled with boiled liquid into the container only in an equal combination with demineralized water. This will prevent the iron from the rapid emergence of scale.
special
Sold in stores with household appliances. It is scented and unscented.
Odorless liquid is used for ordinary irons with a steam generator device, or ironing systems. It is free of impurities and salts that cause limescale and stains on clothes. To conserve such water can be poured in equal amounts with normal.
Perfumed water use caution - mineral or organic components in its composition. During heating, Eau de Parfum substance increased in amount. Because of this may appear spots on the things or break the device.
warm
Such water is not used for iron. It consists of harmful components and impurities. It leaves stains on clothes, from which it is difficult to get rid of.
distilled
You can buy or distilled at home. It is practically no organic, mineral salts and other impurities. Evaporation is slower and this may lead to melting of the silicone coating in the device. To avoid this, regular and fill with distilled water to iron in a ratio of 1: 1 or 1: 2.
Water from the tap
It uses only cold. Hard water mixed in equal amounts with demineralized.
filtered
Liquid from the filter. Safe option for iron.
demineralized
Sold in stores with household appliances. Pour it in pure form or in a ratio of 1: 1 with normal tap water.
From a well or wells
The use of such water for ironing unacceptable. It consists of harmful trace elements, which lead to the formation of a stable plaque.
From under the cooler
Pour it into the tank steamer or steam generator can not be due to increased mineralization. Its use results in the formation of plaque and contamination of the working surface of the holes.
What kind of water can be used and which can not be
Pour into iron Tefal filips and special water odorless, filtered, diluted with distilled or demineralized liquid.
Do not use warm, scented, water from boreholes, wells and cooler. It spoils the appliance and leave stains on clothes.
helpful hints
Not knowing what kind of water poured into the iron, see the instructions. Periodically clean the boiler from scale, even if you are using high-quality water:
- Prepare a solution of water glass and 1.5 tablespoons vinegar.
- Pour it into the boiler and turn on the device.
- When the liquid comes to a boil, turn off the device.
- After cooling, pour the solution and rinse with clean water.
To iron longer stayed clean, I had no scum and limescale, use the right water. On this depends the state of clothes and linen. If there is no fluid boiler, ironed without steam spray, filled with plain water.
