Flower beds and flower beds with their hands out of scrap materials: photos

correct Registration of land It involves the creation of an attractive appearance while providing comfortable conditions. For the attentive host is essential easy care. To solve the above problems at a reasonable cost, it is necessary to create flower beds and flower beds with their hands out of scrap materials. Photos and other materials from this article will simplify making the right decisions. They will help to accurately realize the most daring ideas, eliminate errors and does not exceed the established budget.

A variety of ideas for a bed with his hands: Photos and examples of different materials

This section provides examples of ready-made solutions. With these ideas for the garden beds with their own hands will be easier to formulate their own requirements. On the basis of these data easier to take into account the topography of land, funding, personal experience in the construction and other individual characteristics.

This natural material has a unique aesthetic characteristics that help create interesting appearance without any further processing. If we apply a durable and high-quality granite mortar, design a robust and reliable. It will not have to restore over decades of continuous operation. Such a structure without injury bear a lot of weight, so do not have to abide by the side of caution when updating the beds, in the care of her.

In the previous embodiment, the unusual feedstock creates some inconvenience. If you apply brick, Standard concrete blocks, Will not be difficult to create a flower bed at a certain size. In this case, you can also count on solid durability.

Previous materials difficult to process. Stone and brick components elements weigh much, so you have to spend a lot of physical effort. to pour cement solution takes time. This may cause some difficulties.

If you use woodMany practical issues are easier:

• This is - a lightweight material that is not difficult to move.
• He responds well to treatment. Cut board drill holes and connecting parts is not difficult using hand tools.
• Such products are not difficult to modify, repair.
• Such as in the photo, the design can be transferred after the completion of the summer season in the economic extension to ensure good condition.

These products, unlike wooden counterparts, do not have to specifically protect from rain and other weather conditions. If necessary - the paintwork can be updated quickly. On such elements do not remain traces of blows. Tires with unavoidable defects and after a few retreads are worthless. It is only necessary to take into account the costs of their transportation from the nearest tire fitting station.

This material maintains the integrity and appearance for decades without change. To facilitate the design, you can use plastic bottles.

The last three examples with photos of ordinary beds and flower beds with their hands illustrate the potential attractiveness of different things. They can be used to create original compositions. This approach opens really unlimited potential for the successful implementation of their own ideas inexpensive.

Related article:

Evergreen perennial growing hedge. The ideal solution for the protection of the site, which will not only fulfill the protective function, but also pleasing to the eye with their beauty and form. How to choose plants which are nuances in planting and caring for them - read our article.

How to make flower gardens and flower beds with their hands out of scrap materials: picture and sequence of actions

Experienced professionals are beginning to work on similar projects with careful planning.

It is necessary to ensure a good view from different angles. To do this, carefully examine the specific parcel. You should check the view from the house, hiking tracks. With each "visible" direction must ensure perfect aesthetic characteristics.

Next, specify the presence of nearby pools, playgrounds for children to play and adult recreation and other functional areas. Make sure that these facilities and beds are a suitable supplement each other.

For good growth requires a suitable microclimate. Delicate flowers can destroy the powerful gusts of wind, direct sunlight. It should provide a sufficiently intensive watering. To simplify the care to the appropriate part of the site is necessary to lay water pipes with a tap, or install an automatic irrigation system.

In the next stage of exploring various options. This article will help you determine the correct sequence of actions. Once - will have to view the thematic material. Use the Internet and the information to refine your search of suitable photos and videos.

In addition to the installation site and the wording of the main ideas of the project must contain:

• list plants;
• their distribution plan;
• a list of necessary materials and component parts.

Note! To create high-quality flower beds and flower beds with their hands out of scrap materials photos and wording of the general requirements is not enough. It is necessary to examine in advance the technologies that are needed to create appropriate utilities and building structures.

How to choose the right kind of beds for flowers with his own hands: photo and professional advice

Similar patterns can be found on specialized websites, in magazines for gardeners. With their help, you can explore the spectacular compositions of different plants. In these materials, it is necessary to borrow the best ideas to play them on their own plot of land. The following discusses some professional terms and techniques that apply to this area of ​​activity:

• The simplest option - it is a flower bed "Mono." Here, in one working cycle of the same type are planted plants. The benefits should be attributed easy care. A drawback is the limited flowering period.
• To overcome this "negative", is planted various plants. They are selected so that during the summer season they bloom sequentially.
• The "traditional" version uses a chaotic arrangement of plants. Also used harmonious and contrasting colors, bright accents.

This modification is different boundaries clarity. Selected plants of the same level to avoid height differences. It is necessary to create the simultaneous bloom set of drawings Project.

Specific name in this case specifies a destination. These solutions are used for framing the beautiful pedestrian tracks, Car driveways.

Such flower also mounted around passages. But make it different characteristics of plants

With such a method plants are planted on a slope for imparting a composition volume and a better visibility. The photograph shows that the hill was created artificially. For bedding, you can use the gravel. Further - create a layer of fertile soil. It prevents landslides support wall made of artificial stone. Large boulders and pebbles are used for decoration.

This solution is suitable for the decoration of the relevant architectural structures. It looks unusual and bright. But it should be understood that watering plants at high altitude will be difficult. To eliminate the excessive burden on the user to the corresponding point can be summed tube capillary watering. The corresponding help system further sparingly water.

Similar solutions are used in combination with paving slabs. They look appropriate for large areas.

To create a stable three-dimensional structures built using frames. Carefully select suitable plants for the climbs, corners and other difficult areas of the surface.

Instructions for the construction of beds in the country with their own hands for beginners

After studied the theoretical basis, you can move on to the practice. It will be appreciated especially plants and certain selected materials. But almost always keep the following tips:

• Favorite option you have to transfer to the drawing. This may be a freehand drawing created without strict compliance with the requirements of architectural standards. It indicates the precise placement, size and shape.
• In a selected area removed turf. For drainage podsypku made of gravel and other granular materials.
• At this stage set foundationThe support elements and parts of the future structure. If necessary, protect the thick film components from mechanical damage.
• With appropriate point plan set irrigation system and drain pipes. Mount mains for decorative backlight.
• Next fall asleep soil, moisten it. To accelerate the growth of flowers and protection from pests make appropriate fertilizer and specialized tools.
• Parameters evaluated for soil structure (loam, peat, sand), acidity. Adjustments and choice of chemical components make a comprehensive analysis.
• The layer of soil to make the thickness of annual plants 20 to 35 cm. Many years - more than 45 cm. Disembarkation begin in 2-2.5 weeks after the backfill soil.

The following sections provide photos beds and flower beds with their own hands, especially considered in detail the use of different materials.

Creating of flower beds with their hands from a brick, photo, especially construction

This design is suitable for expressive design embossed sites rises. Note how much easier it looks like an ordinary lawn on the other side of the pedestrian tracks on the picture. Support walls are subjected to high loads, so they are made of stone, brick, concrete blocks.

All of these materials weigh a lot. Therefore, use the same technology as in the construction of fences, arborsAnd other standard architectural objects "small forms. Below is a guide, how to make a bed of bricks with his own hands:

• Heavy construction can not long to maintain stability on soft ground, so a robust foundation belt type.
• According to the relevant plan, dig a trench, the bottom ram, mounted formwork.
• For large structures require additional reinforcement in the form of reinforcing cage.
• Developer mixture is poured pour and wait (for about 2 weeks in the summer season). Stow formwork protect the surface from moisture bituminous mix, asphalt felt.
• Further erecting wall from the selected materials. The photo shows that the smooth stones can be laid without the use of cement-sand mortar.

But in any case it is necessary to check the composition of the soil, the groundwater level. Only then do the right conclusion on the need for a special solid foundation.

Working with such a material is easier as compared with the previous embodiments. He had no great difficulty to cut the plate with the required dimensions. It is set vertically in the ground without a foundation, wet processes. Slate is resistant to external influences, is inexpensive.

But when it is used should be aware of the following disadvantages:

• The material does not have high strength. Because it will not produce reliable high wall. When processing is difficult to make smooth edges. We have to be careful when installing, during operation
• Place individual elements of the joints gradually diverge. As set subsidence sheets deviate from the vertical. The appearance of this material does not meet modern aesthetic requirements.
• From it can not be done-quality wall complex shapes.

Important! Beds with their hands out of brick, slate, stones are one of the most durable designs. The effort is compensated solid appearance. These structures are not difficult to repair.

How to extend the life of the flower beds with their hands from the boards, photos and important notes

How to make a bed out boardsTo ensure the integrity and preservation of aesthetic characteristics over a long period of time? One of the answers is shown in this photo.

This flowerpot collected from boards with carved grooves. They are connected securely without the use of nails, screws and other fasteners. After completion of soil removed season perform disassembly. The individual boards are not difficult to check carefully. They are impregnated with a special compound that prevents rotting, protect against UV rays. If necessary - replace defective elements.

Here it is shown the wall with a picture of wood cut. But it really is more durable compared to the natural analogue. Here it is used a modern composite material constructed from polymers, wood sawdust, dyes and other components. His only significant drawback is the relatively high cost.

Ample opportunities in the selection of beds from the tire with your hands, photos and examples of implemented projects

To create such a composition does not require special mounting hardware. Secure fixation when empty and when the ground is provided by filling a high coefficient of friction surfaces.

Note! It should be emphasized chemically neutral material. Flowerbed of automobile tires are not destroyed by moisture. They do not damage the microorganisms, insects and animals. Continuous safety is ensured without the use of special impregnants and other protective means.

When playing this technology will be useful the following recommendations:

• Cutting convenient to use fretsaw with the electric drive (1).
• With such a complicated tool cuts lines create accurately. Easy enough effort to separate the excess parts (2, 3).
• Next, the tire is inverted to the other side (4) and turn inside out. This process (5-8) is performed in stages. Convenient to use rubber boots. It provides a secure bond with the force application site and does not damage the surface.
• The upper part of "flower" (9) is connected to the bottom of the workpiece (3). For this site, you can use the old steel or cast disc (10).
• Created pot placed on a level surface (11, 12) without additional supports.

Important! To reduce the physical load - choose the model of winter tires. They are made of soft rubber, which lends itself well to the treatment. These products easier to give the necessary form without any extra efforts.

These photos of flower beds of the tires and the tires show a small part of the potential. With this material, even for beginners to work is not difficult. Particularly attracted minimal financial costs.

Simple bed of plastic bottles with their own hands, and photo technology

In this case, as in the previous example, involves the availability of the feedstock. It can gradually accumulate or buy cheaply from wholesalers.

Their digged in the ground without the layer of waterproofing and other protection means. They retain the original color over the years in direct sunlight.

Photo beds with their hands improvised near the house: other ideas for more tips

1 of 5

Qualified creating vertical flower beds with their hands improvised

With these photos vertical flower beds and their own hands to create is not difficult:

Related article:

Crafts for the garden: all new items with their hands. On the land you can give vent to their own imaginations, and make their own crafts. The best examples, and practical advice on their implementation - in this material.

Features high-quality flower beds and flower beds: circuit description, plant selection, helpful advice

To create a truly beautiful flowerbed in front of the house with his own hands, it is necessary to get acquainted with important nuances:

• In order to design turned out balanced, experienced specialists take into account the nuances of buds, flower shape.
• It has a value different effects certain parts of the visible spectrum to the human psyche. Orange, for example, evokes a feeling of heat, improves mood. It is associated with the sun light.
• Plants have different resistance to change in air temperature, wind loads.
• Consideration should be given exactly the scheme of care, watering, fertilization. Appropriate technological operations should not be too difficult.
• It is necessary to study the evolution of plants over time. It should be noted the appearance of shaded areas.
• Tall plants (lilacs, rose bushes) placed in the center or on the background tracks. Host plantaginaceae suitable for edging. Low periwinkle can be used in the intermediate portions.

Flower beds and flower beds in the country are used for decoration, additions of architectural ensembles, as independent elements of decor. They will perform their functions perfectly if the corresponding project is designed correctly. During the construction and during the care recommendations apply this article in the complex.