🌿 tapestries with their hands Tips cottagers

Flower lovers know that climbing plants look beautiful only on the trellis or pergola. High support allows you to admire the plant in all its glory, revealing the bright greens and flowers. For the respectability of the garden it is important that the tapestry looked dignified and attractive. How to make their own hands a garden design HouseChief editorial said Elena Kolesnikova from Stavropol.

Hello! I decided to share his experience in the garden works. I do a lot of things to give, and sometimes even regret that I have no one to share their successes. And, most interestingly, few people believe that this is all I really did it myself! That's why I decided to, as they say, to document and gather all the evidence. And at the same time to share with you, suddenly someone come in handy.

First show results and then tell you how I did it.

Here is my trellis and my clematis. Handsomely? I did it myself
Here is my trellis and my clematis. Handsomely? I did it myself

Read article

  • 1 Materials for the tapestry: the intrigue remains
  • 2 Build a trellis: check the good eye
  • 3 The answer to the riddle: why you need a profile
  • 4 Scheme dimensions and details

Materials for the tapestry: the intrigue remains

I'll start with the secret which I will open towards the end of the story.

What do you think, why do I need to use this metal profile with holes? And I have two of these parts
What do you think, why do I need to use this metal profile with holes? And I have two of these parts

I think that I will build it out of the trellis? No! Metal better things to do. metal supports in the summer sun overheat and creepers they literally burn. And in the winter, if you leave the plant on a metal base, it is precisely vymerznet. But the thing in the photograph is useful to me for sure, and I tell you why later.

So from what is better to do trellis? Of course, natural wood. I just bought here are the pieces of wood in the construction shop.

Products were two meters long rovnenkie, without knots and other defects
Products were two meters long rovnenkie, without knots and other defects
The width of the strips - 4 cm, thickness - of about 1 cm. Light and flavorful, just what I need
The width of the strips - 4 cm, thickness - of about 1 cm. Light and flavorful, just what I need

Build a trellis: check the good eye

From the tool to work, I need a small hand saw with fine tooth, screwdriver and tape measure. Given that the slats are thin, could tighten the screws by hand, but what if there is a mechanical device?

First, I work with the frame assembly. Details are held together at the corners of the small screws
First, I work with the frame assembly. Details are held together at the corners of the small screws
As you can see, quite a simple frame. On the one hand I left the small legs about 30 cm in length
As you can see, quite a simple frame. On the one hand I left the small legs about 30 cm in length
After assembling the box, I fulfilled the longitudinal mounting brackets with a distance of 11 cm. Distance does not matter, the cell can be any size that suits you best
After assembling the box, I fulfilled the longitudinal mounting brackets with a distance of 11 cm. Distance does not matter, the cell can be any size that suits you best
The longitudinal strips are fastened directly to the frame through the end of the same screws
The longitudinal strips are fastened directly to the frame through the end of the same screws
Now - highly intelligent work on the unfolding of the transversal bars. It is important that the distance and there was the same. Since cells are obtained straight and trellis itself - beautiful
Now - highly intelligent work on the unfolding of the transversal bars. It is important that the distance and there was the same. Since cells are obtained straight and trellis itself - beautiful
This self-tapping screws, which I used for the assembly. They are coated, so should not rust from rain and snow. Length - 2 cm
This self-tapping screws, which I used for the assembly. They are coated, so should not rust from rain and snow. Length - 2 cm
After checking the distance between the cross I cemented them in the crosshairs of the longitudinal bars
After checking the distance between the cross I cemented them in the crosshairs of the longitudinal bars
I finished the design covered the stain and varnish for wood
I finished the design covered the stain and varnish for wood

You can not do this, but over time, the tree will turn black and will not look very presentable. As an option - can be painted trellis in any color you like. But too bright colors distract from the plants. So here it is up to you. Universally looks white, but this color is usually yellow in the sun.

And again, the direction of the lattice can be diagonal. Make a little more difficult, but not impossible.

The answer to the riddle: why you need a profile

Now we need to set our trellis, and for that just need the same profile with holes. Why not just stick it in the ground with the same wooden legs? Judge for yourself: thin strips and, besides, wooden. How much do they hold on to the damp ground? At best, one season. A clematis, which meant this design - a perennial plant. Well, I will not as I do every year, to build him a new prop? It is much safer - metal support.

Metal Bearing easily driven into the ground. I put on top of a piece of board, not to bend the edge of the profile, and scored with a hammer. Make sure that the distance between the profile parts is equal to the width of your trellis frame
Metal Bearing easily driven into the ground. I put on top of a piece of board, not to bend the edge of the profile, and scored with a hammer. Make sure that the distance between the profile parts is equal to the width of your trellis frame
An important point: the need to ensure that the profile entered into the ground smoothly. It is necessary to constantly monitor this building level
An important point: the need to ensure that the profile entered into the ground smoothly. It is necessary to constantly monitor this building level
Now you need to connect the legs tapestries and scored in the ground support
Now you need to connect the legs tapestries and scored in the ground support
I trellis bolted to the support screws with large metal washers that are firmly anchored in holes Profile
I trellis bolted to the support screws with large metal washers that are firmly anchored in holes Profile

Scheme dimensions and details

In conclusion, I offer my circuit with the calculation of the necessary materials, all of a sudden come in handy.

The necessary details with dimensions
The necessary details with dimensions

Tapestry my well worth it, she was not afraid of no wind, no rain. It is visible from the window of the house, so nothing prevents us from admiring clematis. I would be glad if you take advantage of my experience!

Elena - a real mistress. It once again proved that in the hands of women screwdriver can work not worse than a sewing machine. In fact, modern tools make it possible to obtain excellent results even for beginners. And if you make a fantasy - even more so. In addition to photos of Elena, we can offer here is informative video about the construction of pergolas:

Do not forget to share your impressions in the comments. In addition, the heading "not a woman's business" is waiting for his heroines! Send us your stories and pictures, we will publish them on the pages of our magazine!

PHOTO: Elena Kolesnikova