Roman shades with his hands: photos, step by step guide

To create such a product will need: simple tools, a suitable fabric the segment, a few inexpensive parts and the frame of the lifting mechanism. Useful knowledge about the correct sequence of actions. All the necessary information you will find in this article. There is information on how to produce high-quality roman blinds with their hands. Step by step instructions and photos with detailed comments will help eliminate errors.

Features tailoring Roman blinds with their hands

As reported in the different information sources, these products replicate the sails and the mechanisms for their lifting. Whatever it was actually, but get a really user-friendly design.

The main advantage is cost-effective fabric consumption. The disclosed fabric completely covers the window holeWithout forming folds. As can be seen from the work scheme is unlikely to have any significant difficulties in cutting and sewing. In this case it is sufficient to examine the stitches in straight lines, and other basic manufacturing operations. Simple component parts for stiffeners and lifting devices can be purchased at any inexpensive hardware store.

Technology creation, installation and operation of products

In the first phase of the project specify the technical parameters of the task. It will be appreciated purpose and features themselves curtains of this type:

• In the open state they are able to demonstrate the put drawing without distortion. This means that it is possible to use high-quality image in the desired resolution to decorate interior.
• Rational use of materials makes it possible to draw attention to the more expensive types tissues. The difference compared to some other species curtains It may be more than 200%.
• As required, apply material with a different transparency. For the ultimate in a darkened room, where installed home theater system, use products «BlackOut» series. Such materials impregnated with special composition, or provide a combination of two types of tissue.

AT this room perform complex work operations, so you need good lighting. Suitable curtains of light translucent fabrics. But we must remember the difficult conditions, drops humidity, The presence of various contaminants, odors. When you select should pay attention to modern fabrics by using synthetic materials. They do not crumple, are resistant to fading. After multiple washings their consumer characteristics are preserved in good condition.

This is especially important when equipped small rooms. Standard sill change to such framing. The window is mounted functional equipment.

Important! If meant frequent cleaning, you should pay attention to the ease of dismantling operations.

1 of 5

It is necessary to examine the various examples to create error-free Roman blinds with their hands. Step by step instructions and photos different options useful to clarify their requirements.

These products are well suited to the different styles. Not difficult to find the perfect, exactly corresponding to the specific aesthetic and technical needs.

Various mounting options Roman blinds on the window

This method allows you to use a minimum of material that significantly simplifies the design. Much more important - an open portal. It can be decorated with expressive decor, make expressive element interior. In this example, the same theme applied to windows and trim fireplace.

In order not to hamper ventilationLifting mechanism is fixed to the frame. It is not always convenient. When moving up and down the fabric may come into contact with the aperture walls are formed so scratches and other defects. Too wide gap detracts from the appearance.

For external installation it is recommended to reserve in all directions over the perimeter of the windows by 15-20 cm. Using thick cloth this option is useful for qualitative darkened room.

To determine exactly how Roman blinds are fixed, it is necessary to take into account the peculiarities of the window opening, the mode of operation. Are important design features. To make the right final decision should be studied species hoists.

Related article:

The curtains in the living room in a modern style: photo. To pick up the curtains in the living room, photo and examples of design work is necessary to supplement the study of the characteristics of the premises. After reading this article will be very easy to make the right decision.

How to sew roman shades with his hands: step by step instructions with photos and comments

At first it is necessary to examine not complicated Roman blinds with their hands with patterns for beginners. To simplify the problem, use the following table with the calculated data. It will help determine the number of folds and the distance between them, depending on the size of the window.

These figures are not binding. It is possible to experiment with different distances to increase and decrease the number of folds. It is necessary to check how products look perfectly at different levels of recovery.

This figure shows that the correction will have to do with the specific dimensions of the weighting agent slats and other parts of the structure. When producing large articles will have a value of strength of the fabric.

Note! Novice easier to work with the material "in the box", small drawings. In large images (straight lines, bands) visible even small defects.

The following is an algorithm for correct actions. It tells how to make Roman shades with his hands step by step with photos and comments:

• Before cutting out the fabric is soaked, dried and smoothed iron. It should take into account temperature regimes and other restrictions imposed by the manufacturer of the material. This set of actions needed to prevent shrinkage, distortion sizes.
• On the part of the reverse side applied marking (crease rings set point).
• To get a tight edge in these areas using double fabric hem. The level of tension in a sewing machine is controlled, provide uniformity of the stitches and the absence of matter deformation.
• Further useful stapler (model construction). This tool is fixed adhesive tape on the top bar. After tissue processing attached thereto a second part of the "Velcro". Such reusable fastening assembly user friendly. In one motion the curtain can be disassembled for cleaning.
• Bar made of wood can be painted or wrap the same tissue from which create curtains. To secure the material useful staple gun. If you use the adhesive composition, be sure not appear visible stains after its solidification.
• At the bottom of the fabric is wrapped so as to create a "pocket" for heavy rail. In order not to increase the size of the metal can be used instead of wood. Use rod of aluminum, stainless steel, to eliminate the occurrence of rust.
• Given made markup secured by sewing machine sections dense tissue. Here insert the cross-bars. There a lot of weight is not needed, therefore suitable wooden or plastic products. Edge is sewn on only one side, so as not to create unnecessary difficulties in the preparation of products for washing.

• Use wide stitches, not to limit the freedom of rotation of these elements up and down.

• The blind is raised to its upper position, check the uniform distribution of folds.
• To attach a strap or rather to the window frame or wall using a drill, screws, Plugs, brackets.

How to make a lifting mechanism for Roman blinds with their hands

The simplest embodiment discussed above. Implementation of this project will not be accompanied by considerable difficulties. It should be noted additional benefits of high-quality plastic rings, in addition to a low cost:

• They weigh little, perform their functions without unnecessary noise.
• Unlike metal counterparts, these products are not destroyed by corrosion.
• They should not be removed before cleaning the curtains in washing machine.

Complex mechanism for Roman blinds is better to buy ready-made from a reliable manufacturer, with formal guarantees.

In this example, you can ensure that no feasibility of producing such structures on their own. There is a special unit which converts the movement of the chain up and down in a corresponding rotation of the main shaft. This rod is driven by a built-in mechanism of the carriage, which raises and lowers the work tape. Fixed on her cap is attached to the lower ring.

This product is universal. It is suitable for different types of curtains. Permissible installation of several carriages, arbitrary moving horizontally with subsequent fixation in the right places. Fabric as in scratchbuild, attached to the support strip with tape "Velcro".

In this set it changed not only the composition of lifting mechanisms. They are hidden in the decorative body, so do not use hidden installation methods. Such articles may be attached to ceiling, The window frame. The composition of go all the parts needed to start full operation.

Such apparatus is operated with the use of remote controls. They include in the class centralized control system "smart House".

Related article:

Roman blinds for plastic windows: photo. The main advantage of an independent design house interior is a possibility of realization of unique projects. How to choose the material webs? How to sew a design? How to set the curtains on the windows? This and much more, read the article.

Roman shades with his hands: a master class

Conclusions and further recommendations

With the help of photos and step by step instruction Roman blinds is not difficult to make your own hands. When working on a specific project, consider the requirements for the design, construction. Necessarily study questions for future use, tissue resistance, cleaning up procedure. A comprehensive assessment will help make the right decision when choosing a particular technique and the necessary components. In some cases more profitable to purchase drives factory production.