Flowers from corrugated paper with his own hands: master classes

Flowers not only give, they are used for interior design and decoration of banquet tables. Often for decoration different festive events require a large number of colors. You can create an inexpensive and beautiful flowers corrugated paper with your hands. Such decoration not wither with time and can be stored for a long time.

Benefits and properties of corrugated paper

To perform the original decorations used gofrobumaga which has certain advantages:

• the material accessible and available in stores;
• such material is packaged in rolls, which makes it possible to keep it a long time;
• It is easy to use, to create a composition need only glue and scissors;
• workpiece differ interchangeability, parts are easy to combine and prepare anew;
• material is characterized by the variety of textures and shades.

How to make beautiful flowers out of crepe paper with his own hands

Flowers from corrugated paper with your hands to collect just enough. It uses various methods of manufacturing. Apply different preform from the cut paper strips. There are special instructions to help you create original compositions.

The steps of creating your own hands rose pleated paper: step by step

Roses of this material is performed by different methods. This yields a variety of compositions, or simple flowers, which are placed in a vase.

To perform the Flower of corrugated paper paper, you need to prepare the desired color palette, pieces of wire, scissors, sheets of cardboard, a pencil and a special glue. The phased process is painted in the table:

Picture	step process
	On cardboard drawn individual petals, which should be of different sizes. By using different templates flower will look better.
	The material formed a bellows. According to the attached blanks are cut out petals. Well done and leaves for the rose. In the blanks with your fingers is a slight indentation to bud.
	Wire cut the individual lengths. In this case, one end bent nose pliers for the core bud. Then the middle of the wire wrapped petal small. The lower part of the stalk is glued to the workpiece.
	Gradually formed bud. In this case, the petals are glued from small to large sizes.
	With the help of ribbons, corrugated strips or strands of green you need to roll up the foundation bud. Then wrapped stem and stick it on the harvested leaves. Material finally fixed with an adhesive.
	Straighten out the petals and leaves.

It made several colors, which are set in a vase or in a variety of wicker baskets. If the decor need only the buds, the part of the stem is cut.

You can make a rose by another method in which the product is carried out in a few minutes. It is necessary to cut a strip of great length gofrobumagi. Its width should be 8-10 cm. One edge is processed by the type of edging for a pie. The edges of the strip zaschipyvaem fingers along its entire length. Then strip rolled in the bud, and the edge is glued to make the article. Made bud turns green thread. Pre-fabricated elements must be mounted on the blank from a wire. At the same time for a couple of hours carried out a whole bunch.

Related article:

Weaving newspaper tubes incrementally new ideas. The correct application of this technology, described in the article, it is useful to create his own hands products with unique aesthetic and functional characteristics.

An interesting option is the creation of Topiary corrugated paper with your hands. This design can be made from scrap materials in a couple of hours. They are made for decoration and interior design for banquets.

Technique of peony paper

Because this material can create a beautiful peony. This will require a paper of different colors, paper clips for fastening, wire, thread and scissors.

The table shows the sequence of operations.

Picture	Process of creation
	From colorful rolls of sheet cut to the same size.
	The elements are formed in an accordion, but the width of this should be no different.
	Accordion clings by using paper clips. Binding the individual elements are cut in the form of petals. Also, you can simply cut corners to make a triangle.
	Middle parts of all blanks are joined and stacked in size. All sheets are collected into one assembled unit and rewind the middle.

Comment

Irina Rosenstein

Designer studio "Cozy Home"

Ask a Question

"When you create a peony can be used 5-7 colors. In this case, a smooth transition from pale to saturated tones. "

Related article:

Decoupage for beginners step by step with photos of the bottle.Wink talents will be easier, if you study carefully decoupage for beginners step by step. This article provides detailed instructions to help reproduce the technology in the home without any errors.

How to make a sunflower?

When deciding how to make flowers out of tissue paper, should try the sunflower. Thus it is necessary to prepare the material black, brown and yellow colors, the PVA solution was, wire segments and scissors.

Petals should be oblong and pointed tips. Leaves should be the same. Then all actions are performed according to the instructions:

Picture	stages
	From dark shade sheet is cut strip. The longer it is, the more lush flower will.
	On the larger side prodelyvat minor cuts. The width between them should not be greater than 4 mm, and the cut length of about 1 mm. To speed up the procedure, the strip can be laid in several layers.
	Created the workpiece need to twist into a tube and wrap the dark thread. It is necessary to straighten one edge to create a core.
	Then the pitch fixed using adhesive. The core is turned upwards and her petals are attached in a circle. Is several rows of yellow petals, and then formed green petals.
	From the material is colored green rectangle which covers wrapped core. The rectangle is attached to one part green petals and then twisted around the wire rod.

In advance you can prepare the leaves, which is better to make wide. They are fixed to the wire with the winding stem.

original tulips

Of tulips, you can create an original bouquet of corrugated paper. To work you need to prepare gofrobumagu, pencil, cardboard, scissors, wire, thread and glue PVA.

Creating tulips includes the following steps:

Picture	Work
	Cardboard portrayed petal and cut. Paper will take about 5-8 petals.
	Petals laid out separately. All the elements you need to twist the ends.
	The edges of the petals have to stretch a little bit and give shape to the base of the cup.
	All items are distributed in a circle. This forms the bud. At the bottom of all the petals are twisted and fixed with an adhesive.
	The flower is attached to the end of the wire, which is used as a stem.
	Of the green paper is cut strip that is wound around the stem. The cut sheet is slightly bent and glued to the stem.

Helpful information! You can try to make the tulips of paper and candy. To do this, selected chocolates in foil, they are attached to the wire, and then attached on top petals.

Creating a lily

Lilies are also created by the type of bud collection. Their master class colors of crepe paper is complex.

The process includes the specific steps of:

Picture	stages
	Preparing paper yellow, green and purple hue. Also need paint, glue a piece of wire, brush and scissors.
	Of rectangular blanks are cut out petals.
	The tips of the stretched parts and then tighten with a pencil.
	At the base of the petals of watercolor paint applied darker shade spots. It should stir the dark blue and brown.
	Wire made the stalk. Then rectified and corrugated paper is wound around the wire.
	On the stem is the pistil
	The stamens are made of yellowish paper. At the same time cut the workpiece and along its entire length cuts are made. The resulting twisted elements.
	Of glue and semolina made anthers. A drop of adhesive is applied to the tip of stamens, and then dipped into semolina. Circuits made painted brown.
	Of thin workpieces made of green paper leaves. They are attached to the curved shape.
	To stick pestle stamens. Then three petals are attached, and then the rest.
	Made a smooth transition to the flower stalks. Billets leaves attached with glue.

Unusually look candy attached instead of the pistils. They were wrapped in foil and secure the stem to the workpiece.

Color variants of the corrugated paper with candy

With the use of beautiful colors of crepe paper, with your own hands, you can make a bunch of candy. This will require sweets, corrugated paper for flowers and stems, wire, scissors and adhesive composition.

Picture	stages of work
	Paper cut out a rectangle that folds in half and rounded side. This piece is wrapped candy. To give the product a beautiful shape, the paper in the center of a little stretched. One edge of the fixed band.
	To make the stem, the wire should be attached to the base of the flower. For this purpose, silicone gun. Cut the stems to the flower. They can be made larger, then the product will be more lush. The central part of the element also needs to stretch and twist the edges.
	The petals are attached to the bud with thread, rubber bands or adhesive. Of the green paper-cut leaves, which are fixed at the base.
	To complete the image of the foundation can wrap green gofrobumagoy.

Chocolate candies can be placed in the middle parts of the paper. Around sweets twisted crepe and wire segment wound flexi hose green. Over every candy you can tie a beautiful bow. All buds are attached to a specially prepared skewers. you can put those flowers in a decorative box and tie a ribbon.

What can be made of corrugated paper: tips

From gofrobumagi can do a lot of interesting crafts. various relevant Christmas decorations. It may be a clown, snegovichki, Santas and leverets.

By simply refers toys Christmas ball. For this added together the five sheets of paper of different colors. Then one makes the accordion, and the middle wire is wound. The sheets need to fluff, and the edges are cut in a semicircular shape. Rib sections are attached with glue. At the end of the product to the top of the need to attach a thread. These toys can be connected in fairy lights or hang on the windows and elsewhere.

It is important to choose the right paper for creativity. It must be plastic, but at the same time strong. Necessary to select a material saturated colors, colored, well, without streaks and bands. When using adhesive paper should not fade.

In addition, the corrugated paper can be made pictures, Ornaments Postcard and all kinds of animals. Demonstrating imagination, you can create gorgeous flowers and bouquets for various celebrations.