🔫 How to make the gate of corrugated board with your hands: the detailed instructions

If you decide to fence the area around his infield, offer to find out how to make the gate of corrugated board with his own hands. With certain skills and having at its disposal a tool, you can quickly and easily install a reliable design. We only need to thoroughly understand the intricacies and peculiarities of the process.

Kinds of designs beautiful gate of corrugated board

The design of the enclosing structure can vary. Beautiful gate of corrugated board can be:

• hinged, sliding, sliding;
• one-, two-folding;
• wicket or installed next;
• with a stationary frame, which is provided with an upper crossbeam or without it;
• with different spatial arrangement of the jumpers: diagonal, horizontal, vertical.

Features gates and gates manufacture of corrugated board with their own hands

If you decide to make the gate and the gate of corrugated board with their own hands, should advance to meet the possible versions. The order will depend on the installation site specific design. If this garage, Will have to give preference to one embodiment. Gate and gate for the fence of corrugated board are made quite differently. We offer to get acquainted with the peculiarities of work in more detail.

Properties manufacturing fence gates and gate of corrugated board

The process of construction of swing gates is quite simple. Installation will perform even the inexperienced welder. To install the design is sufficient to perform a couple of small stitches. However, choosing the location for the installation, there should be space for opening leaf. In winter, it can bring some inconveniences: have to remove large quantities of snow.

To open the sliding does not need much space. They are characterized by sophisticated design concept. When installing the gate and the gate of corrugated board and set the counterweight rails along the fence. Sliding system to mount complicated. They require special care during the operation.

Sliding on a design similar to the sliding. Most often performed two-folding, moves in different directions. When mounting on both sides of the entrance stands an empty seat for wings.

Gates with wicket gate, and without it of corrugated board for the garage

Garage usually selected wicket pass doors made of corrugated board. This option is quite convenient, as it allows you to get inside the building without having to open the gate.

Many photo garage doors with a wicket of corrugated performed lifting. Such systems are easily automated, and allow the inner space efficiently dispose. special equipment is required for stable operation of the opening and closing structure

How to make the swing gates of corrugated board with his own hands with a wicket and without it: Instructions and photos of finished products

The procedure for manufacturing such a structure may be different. Everything will depend on what kind of system preferred. You can set the swing gates with a gate of corrugated or manage doors without wicket. We offer the sort order, how to implement both variants.

Drawings and gate circuit of corrugated board with his own hands: illustrations

The order of execution of work, and the desired amount of material depends on the chosen design. Swing system there are single and double. The first type of instability to wind loads and the need for more space is limited use. Such gates are mounted only on narrow spans.

Double gates of corrugated quite often made with his own hands. On the developed drawings and diagrams provides:

• the total width of the structure and each flap separately;
• the size of all the elements mounted to the chassis;
• the exact location and size of the loops, the inner bolt, lock;
• number of columns, their size and depth of instillation;
• the location and dimensions of the gate.

Instructions for the production of corrugated gate with their hands without a wicket with the photo process

In the absence of wicket gate manufacturing process of corrugated board with his own hands is greatly simplified. Offer to get acquainted with photos, visualize the process of installation work.

Laying the foundation and installation of pillars

Installation of doors of corrugated board with your hands start with the installation of columns. For this:

• We perform the counting, determining public places are installed vertical supports;
• We dig a pit depth which is about 30-35% ground part columns whose dimensions after instillation must be 0.5 m greater than the height cloths, which allows to provide a gap between the doors and ground. The diameter of the excavation should be about 20 - 25 cm;
• pour the bottom of 10-15 cm of gravel. It thoroughly tamped;
• prepare concrete mortar;
• insert the support legs in podgotovlonnye pits with concrete and fix solution, ensuring correct spatial orientation.

Creating a framework and assembly design

To make the gate of the corner, and corrugated board with their own hands can be as follows:

Illustration	description of the action
	To avoid warping the metal elements as a result of high-impact, characteristic of the welding process, the frame assembly are produced by direct attachment to the support posts. To this end is welded to the metal profile support poles with a length equal to the span width. We place it horizontally
	Separately produce central sidewall. Their length is equal to the distance between the horizontal bars welded. All four of these elements is required. Two welds in the center, if the gate leaf will have the same width
	For the other two sidewalls first welds canopies. Choosing fittings with suitable dimensions and strength characteristics. We dispose of them according to the developed drawings
	Sides with canopies are welded to the horizontal bar. Mating canopies welded to support posts. Welded webs according to the scheme by arranging them horizontally, vertically or diagonally
	Cut the cooked carcass in the middle and around the supporting pillars
	We check the performance of the assembled structure. The flaps should be free to open and close
	Remove the frame with hinges. Scald and thoroughly protect all seams
	We paint the frame in the chosen color. Install accessories. Check its serviceability
	Fasten steel sheet. gates ready

Fabrication and installation of the gate swing gate of corrugated metal

Installation of metal swing gate of corrugated board with a wicket is similar. The differences are only in the transverse dimensions. A first support post is welded frame, and then cut off, completely welded and painted. By the final frame mounted profiled.

If you decide to install the gates of corrugated board with a wicket in the order of the installation work will be somewhat different. Explore procedure can be from the following video:

Sliding doors of corrugated board: guide for the production of a photo process

Such constructions are very popular because of the possibility of saving the internal space of small courtyards. We offer to deal with the intricacies of installation sliding gates made of corrugated board, having become acquainted with photos detailing the installation process.

The drawings and diagrams

Getting to the development of schemes for sliding gates of a private house of corrugated board, it is necessary to consider carefully the photo of finished designs and explore their distinctive features. This will allow a better understanding of the characteristics and to acquire the necessary components. This system includes:

• the support base;
• traps;
• carrying carts;
• knurled roller;
• board sash prevents rocking movement at the time;
• automation system, if the gate is decided to make automatic.

Instructions for the production of

Installation work begins with the installation of supporting pillars. The process is similar to that described for the swing system. The depth of the holes prepared in this case should be about one meter.

Attention! Given the large weight of the recoil system, the foundation is poured on a mandatory basis.

For its formation required channel width 14-22 cm and fitting with the transverse dimensions of 15 mm. Works are carried out in the following sequence:

• and sill reinforcement of the reinforcing elements are made. To this end, the rods are cut apart and welded to the shelf sill;
• a trench is dug, the bottom of which is formed from sand cushion thickness of 15 cm;
• set "benches" of the valves;
• ready-mixed concrete and the solution is poured into a prepared trench. Given time for its complete solidification.

Manufacturing of the carcass through the following steps:

• pipes are cut in size according to the drawing;
• place of Compound cleaned, degreased, primed and painted;
• brewed outer frame;
• welded sheathing, which will be attached to the steel sheet;
• finishing material is attached.

Assembling construction in the following sequence:

• on rollers set frame. We catch it by means of welding, providing the pre-required spatial position. Align the position of all the elements that finally they are welded;
• welds separators, end roller;
• control the position of the profile roller. It must be in the trap;
• We check the geometry of the carcass;
• sheathe frame floorings.

More detailed assembly process of sliding gates can be found in the following video:

How to make a sliding gate of corrugated board with his own hands: detailed instructions

Special attention should be paid to how to make sliding doors made of corrugated board with his own hands. If sliding for some reason are not satisfied, this structure may be the best option for processing the input group. They consist of two wings, they move in different directions at the time of opening of the gate.

The drawings and diagrams

At first glance it may seem that it is fairly simple gate of corrugated board. In fact, you must perform the correct calculation for the proper design of the installation. For this is a scheme worked out and drawing, taking into account all the nuances that are characteristic for the operation.

Instructions for the production of

Installation gate of corrugated board is performed as previously described scheme. First mounted the supporting pillars. Then going to the frame, mounted components and assembly systems produced entirely. We offer watch the following video to better understand how to build the gate of corrugated board with his own hands:

Nuances of manufacturing of corrugated gate with elements of forging with photos of finished products

With a large variety of the gate of corrugated products with elements of forging attract attention. The process of manufacturing such structures is similar to those described above. The difference is the additional installation of decorations.

Attention! Decorative elements are attached to the wing after the decking is securely fastened.

To increase the service life of all the decorative elements are covered with protective compounds. Often chosen golden color. Offer see picture forged gate with Bent:

1 of 4

How to pick the lock on the gate of corrugated board: Current tips

As the locking mechanism on the gate of the sheeting may be used:

• internal (mortise) Castle. For its location provides a special place in the frame;
• mounted. The most commonly used in the two-leaf designs. For him, each leaf is welded loop;
• overhead, with a handle;
• electromechanical lock.

To select a suitable locking device on the gate of corrugated board, it is worth paying attention to:

• level of protection. The model should allow operation in high humidity and significant temperature variations, maintain performance when large amounts of dust. From this position, the best option is false and mortise locks for lever type;
• geometric parameters. The dimensions of the locking mechanism should be correlated with the parameters set by the gate;
• smooth running of the locking mechanism. Unacceptable blockage, the presence of sudden movements.

How much are sliding, sliding and swing gates of corrugated board: a review of prices

If you set the front design with their own hands it is not possible, it is necessary to seek help from professionals. Price on sliding, hinged and sliding doors made of corrugated board will depend on many factors:

• size;
• decorations;
• complete;
• equipment.

Swing without having to install as of August 2019 will cost a minimum of 9,000 rubles and a width of 3 m and the aperture 9700 rubles and a width of 3.5 m If necessary, the installation work cost will increase to 45,000 -. 60000. The larger the aperture, the more expensive it will cost service.

Attention! Design, finished steel sheets on both sides, will cost more expensive than those that are closed on one side.

Sliding and sliding are more expensive. "Turn key" with the width of the opening less than 3.5 m 65000 rubles. When installing the automatic cost increase.

Once you understand how to install the gates of corrugated board with your hands, you can safely get to work. We just have to decide what design you are more comfortable.