Table made of wood with their hands: a phased manufacturing drawings

Buy Now furniture is not a problem, especially since manufacturers offer cabinets, headsets etc. for every taste and budget. However, far more interesting to do for the house something with their own hands and their own project or, in extreme cases, taken from the Internet. Due to the review of the online magazine HouseChief.ru you can learn how to make a table with his hands out of wood.

Ideas for making the table with their hands from a tree: photos, advice, drawings and step by step instructions

Before embarking on independent manufacturing tableEspecially the beginner, you need to take a few preparatory steps. In particular, the need to:

• decide where and under what conditions will be maintained table;
• to design and decoration products;
• make or take from the Internet drawings;
• to determine the material;
• to prepare the necessary tools and materials.

When you are with all defined, you can proceed directly to the manufacture of table. As the name of our review, we will continue to consider various options for manufacture is a wooden structure. If you are a beginner, it is best to choose a model simpler.

Wooden table for the garden and home: the choice of material

The best material for the manufacture of chairs, tables and other furniture - natural wood. Not necessarily use fresh wood for home DIY are perfect old board from a variety of designs, including those from cargo pallets. However, the use of secondary lumber should be carefully treated wood from dirt, paints etc.

To make a table with his hands made of wood, you can use other materials: glass, metal, epoxy resin etc. Typically, the choice of material depends on the type of design, size and operational conditions of furniture. What is good wood, it's the fact that it is easy to restore.

The tools needed to create a wooden table with his hands

For the manufacture of, for example, a wooden garden tables require a minimum set of hand tools: hacksaw, hammer, Miter box, screwdriver nails, screws, tape measure or ruler, a set square and a pencil. This low enough to make a simple design for a garden. You will also need sandpaper for polishing wood before the finishing trim, glue and clamps.

For the manufacture of more complex structures, or if you decide to engage in the creation of furniture and other crafts, should buy electric hand tools. You can purchase the equipment from the middle price segment, which is fully pays for itself. A tool that will allow faster and better to do more complicated and beautiful tables:

• electric drill and Cordless;
• jigsaws and elektrorubanok;
• table a circular saw;
• mill;
• Sander.

Table made of wood with their hands: drawings, photos and step by step instructions

With the proper approach, competent figure, the presence of material, tools, and a strong desire to make a wooden table with his hands is not so difficult. We offer several options for the manufacture of structures of wood with step by step instructions and explanatory pictures.

For manufacturing various tables needed for this boardsWhich can be taken from old pallets, wooden timber. For countertops can take chipboardBut not for furniture, which is used on the street.

Recommendation! Forming drawings independently, can use conventional tetrad sheet into the cell by taking a single cell 10 cm. So it will be easy then to calculate the dimensions of parts, angles, quantity, etc.

Making a round wooden table

The model proposed below roundtable is designed for 4 people and is suitable for kitchen of medium and large sizes. It is quite easy to make your own hands, even from scrap materials, eg, shredded pallets.

Let's try to repeat all the stages of the work.

Illustration	Description of the action
How to make your own hands countertop made of wood
	For the manufacture of countertops need to pick up a board and to treat them with the help of the planer and circular saws, as well as sandpaper or sander. Since in this case the parameters countertop - 1000 × 1000 mm, it is necessary to 6-7 with approximate dimensions of boards - 1050-1100 125-150 × × 25 mm. Longitudinal side boards prepared PVA or fluff joiner's glue, connect each other to get a kind of shield and clamp clamps.
	After 24 hours, the clamps can be removed. Further on the resultant board to find the center and with a compass or adjuvants (nail, twine and crayon) delineate a circle with a diameter of 1000 mm.
	Next, using a jigsaw to cut out a circle of defined contours.
Production of wooden drawer side and the legs for the table
	For the manufacture of simple legs for the table can take a wooden bar with dimensions of 40 × 40 × 725 mm. Wood sanded and polished. Not to be fooled, you can buy on the market, or simple carved legs. As a rule, they are a standard size, but they can be a little sawed if necessary.
	To make the side-bar or cross-piece for connecting the table legs to each other and fixing countertops, segment 4 need board with dimensions 450 × 125-150 × 25 mm.
Build your desk hands out of wood for the garden
	At the top of each leg to hold the two sides of the center and edges which will abut worktop, at 50 and 100 mm drill hole diameter 7.5-8 mm (for cokes). The same must be done with the side-bar (marking to do from the top edge and observe the alignment). The opening leg pour a little PVA and paste cokes (wooden pegs 20 × 8 mm), which can be made independently or purchased in the market or in the shop. Cokes inserted halfway.
	To facilitate the task collect two parts, which are then connected to each other by two side-bar.
	The result is such a structure. However, it is still not stable, so the need connecting strips of timber.
	For a more snug fit to the drawer side, the bars with a size of 200 × 40 × 200 × 40 or 50 × 50 mm should be cut from two sides at an angle of 45 °. For greater accuracy, you should use Miter.
	The connecting rods or "headscarf" attached to the drawer side and the legs with the help of screwsPre-drilled holes therein with a diameter ~ 3 mm. Place the bars as indicated in the picture. On the drawer side and scarves set furniture made of metal corners to which to attach the countertop.
	The photo clearly shows how to set the "headscarf".
	The result here is a table. Further well sanded all surfaces, cover antibacterial impregnation, stain, paint or just varnish. You can also decorate the table on technology burnt wood.

The proposed size of details and designs are optional. You can make a table of their own designs and sizes that are right for your needs.

How to make a wooden kitchen table

It's nice to gather with your family for dining table in the country. We offer a model that can be easily assembled from a tree with his hands.

Illustration	Description of the action
	Not to repeat: the worktop for a table made of wood in the kitchen doing exactly the same as in the previous case. The difference in shape and size (1000 × 600 × 25). And now for the manufacture of base or podstolya. You will need two short and two long side-bar. Dimensions short - 320 × 150 mm.
	Also cut and long tsargi size of 900 × 150 mm.
	Putting cokes using 2 parts of the two legs and short tsargi (each).
	Further, these two parts are connected long side-bar (as in the case of round tables described above).
	We get a table frame.
	Cases connector bars or "gussets" with section 40 × 40 mm.
	Fasten "headscarf" self-tapping screws to the table frame.
	Further, the two bars 900 × 40 × 40 mm section connect the legs to each other on the long side. The distance from the floor at its discretion. Mounting the legs can be done with seating area.
	On the bottom shelf boards fasten using screws. For shelves can take a thick plywood. Dimensions shelves 900 × 400 × 8-10 mm.
	Fasten the table top, grind, that there is no burr, decorate and get done with his own hands from the dining table wood with bottom shelf, which is always useful to accommodate a variety of things or as a footrest children.

Making coffee table made of wood with their hands

Low table for the living room It became an integral part of almost any situation at home.

We offer instructions on how to fabricate such a structure independently own hands.

Illustration	Description of the action
	We produce top and bottom in the same way as in the previous cases. Dimensions - 1000 × 500 × 25 mm.
	Attach to the bottom of the legs, which can be used for rollers, furniture coasters or "noses" from the pallets.
	Making sidewall with dimensions of 500 × 300 × 25 mm.
	We connect with the sidewall of the bottom with screws or "coke". Connecting via pegs furniture is quite difficult, but it is not visible fixing points.
	Further collecting column of 4 segments board with dimensions 300 mm × 100-150. Assembly make way "well".
	The column is attached to the bottom of a pre-marked area.
	Cover design top and get the original coffee table which will look at interior apartment, country cottage or villa.

Creating a table and benches made of wood gazebo in their own hands

Nice to sit at the table, made with his own hands, in summerhouse at the cottage or country house.

Consider how to make a table with benches.

Illustration	Description of the action
	Manufacture of the table top boards with dimensions of 1700 × 700 × 25. Making and processing a wooden board, as well as for the other embodiments described above.
	To take the seat bench boards 4 - 1700 × 150 × 25 mm.
	You also need to cut two side-bar with the dimensions of 1162 × 117 × 25 mm. They will be joining racks together.
	Cut out two cross boards, which will serve as a support for the seat bench.
	Cut and cut the corners on two boards for clamping the main cross.
	Now you need to make 4 top crossmember for fastening the legs and supporting the tabletop.
	Finally, cut the four feet, whose ends are cut at an angle.
	Putting the two sections of the supports 4, two main lower and upper supporting beams.
	Anchoring structure remaining beams.
	Putting section through two drawer side.
	Now fasten seat benches. The connection can be done by means of screws for wood.
	Next, install a wooden table top for the table and fix it. We carry out the finish polishing, primer, Impregnating, painting or lacquering surfaces. After all this, you can set the table with benches in the gazebo.

Photo gallery of various wooden tables choices made with their own hands

We offer you a small selection of photos that can be done by hand from plain wood. We hope you'll like them.

1 of 12

A few words in conclusion

We are told and shown you how to self make tables any purpose. We hope that the sketches and descriptions of them will help you when you decide to try your hand at carpentry. If you have any questions or comments, you can contact us via the comment form.