The wash adhesive from adhesive tape with plastic: water purification, tape, solvents antiskotchem, effective methods.

If you've seen at least one episode known masterwork zero "Desperate Housewives", you probably remember, for girlfriends no not solve the problem. What to say about spots. Persistence and work wash away the stains from any surface, the only thing that is not always possible to preserve in its original form, it ruffled reputation. Today Editorial HouseChief.ru decided to lend a hand to those who have not been able to clean yourself marks on surfaces, we tell you how, and most importantly what, effectively and effortlessly clean up glue from scotch tape with plastic.

All have tried - and nothing helps? Then be sure to read our article.

Read article

1 The scrub fresh traces of adhesive tape with plastic
- 1.1 How do I clean the plastic tape by applying new strips of adhesive tape
- 1.2 As otteret tape of plastic cloth soaked in hot water
- 1.3 Mechanical removal of traces of adhesive tape stationery eraser
2 The improvised wash ingrained traces of adhesive tape on the plastic
- 2.1 How to remove traces of adhesive tape on the plastic vegetable oil and alcohol
- 2.2 As from the plastic wash Scotch gruel of baking soda
- 2.3 Than chemicals to scrub the adhesive from the adhesive tape
- 2.4 How to wash traces of adhesive tape with white spirit and acetone
- 2.5 How to remove traces of adhesive tape edible vinegar and ammonia
3 The specialized tools can remove traces of adhesive tape with plastic
- 3.1 How to clean plastic surface means "Antiskotch"
4 The better to wash double-sided tape
5 What better to wash with tape plastic window

The scrub fresh traces of adhesive tape with plastic

It is better not to spoil, so you do not wash. However, after the move, there, there, there are traces of adhesive tape. Over time, they become unpleasant dark spots, which only irritate the eyes. Therefore, it is easier to remove dirt just left.

How do I clean the plastic tape by applying new strips of adhesive tape

Women know for sure - the best way to erase a varnish layer of polish solvent-free, apply another coat of varnish. The same applies to the tracks from the tape. The most effective way, it is also the most simple - simply glue in place print another tape, and immediately pull it. Such a "fast epilation" helps in almost every case, but may then suffer floor covering.

Reception, by the way, works well to clean the porous surfaces of the wool and hair. The question is only one - and how much will go scotch?

As otteret tape of plastic cloth soaked in hot water

Even our grandmothers told - soapEspecially economic, to cope with any spots. The stains on the floor worse? If you do not suffer handroz, you are welcome to work for a while with a scraper. To do this, the place of contamination is necessary to moisten with soap and water, leave for a while.

The only problem, do not choose too sharp scraper, it is almost a hundred percent of the one hundred leave nasty scratches.

Mechanical removal of traces of adhesive tape stationery eraser

Probably there is no man who does not try delete traces of a linoleum a shoe (such irritating black bars) conventional eraser. And yes, it works! So, with adhesive tape and the method itself is quite not bad. But it will have to make considerable efforts are likely to take more than one eraser.

A little patience and skill, and you have a new clean floor. Here only have to answer to the son-in high school, where did all the erasers for pencil

The improvised wash ingrained traces of adhesive tape on the plastic

Remove traces of long-standing, as hard as a chronic disease. Something that we have no time, sooner or later reassert itself and put the question bluntly - wash or not wash! If you do decide to get rid of chronic traces of adhesive tape, then you should consider more effective ways than soap and water.

How to remove traces of adhesive tape on the plastic vegetable oil and alcohol

Alcohol - a unique liquid, it can be taken as to emotional wounds (in different proportions mixed with water), but also to eliminate surface contaminants. This applies not only to the electronics, the treatment of wounds, but also for combating purity plastic, wood and other surfaces.

In the fight for the purity of compromise should not be! It would not have been hurt and offended, but still has to go into business.

If you really do not want to part with stocks of "intoxicating", you can use another antiquated way - to bring a sticky mass of vegetable oil. Chances are not very many, because as well as paint, oil effectively on fresh pollution.

Tip! Oil should be carefully applied to the stain and cover for the "impact". The process can take several hours. After that, the plastic enough to wipe with a damp towel to wipe dirt residues.

As from the plastic wash Scotch gruel of baking soda

Opponent any contamination located outside coating - abrasives. To enhance the effect, you can use baking soda and coarse brush. If your floor protected layer of lacquer or enamel, will likely re-application of the protective layer. However, both of the spots you will get rid of long-standing.

Baking soda effectively dissolve into mush, resulting mass should resemble the consistency of sour cream.

Soda in this case is sodium abrasive, and an additional brush. If after treatment there are still traces of glue should be repeated "event" again. After treatment wipe the place with a damp cloth and then wipe dry.

Than chemicals to scrub the adhesive from the adhesive tape

And if you have tried everything, but it did not help. Take a look around.

Solvent, powders, even oatmeal and gasoline - all this can be an effective tool for cleaning the surface of the adhesive tape.

We start with the most expected vehicles - sprayers washing windows. In its composition they already contain the necessary acids and alkalis, which may well be the solution to the problem and destroyer traces of duct tape.

stages:

Spray the liquid onto the contaminated area.
Give five minutes to soften the sticky substance.
Otteret adhesive surface.

Abrasive powders. This method is not suitable for all surfaces, glass, or plastic can get nasty scratch. But the porous coating should be fine.

The procedure is very simple. After application of the bulk powder (can use semolina), slightly damp sponge dipped in dishwashing particulate substance and attaching the weight applied to the surface. Gently clean the surface, while studying "caused" damage. After cleansing the surface should be rinsed and wiped dry.

Gasoline, excluding pungent smell, can also help out in the process of cleaning the surface of the adhesive tape residue. It operates on the principle of a conventional solvent, and are often very effective. True, for a while you have to erode the smell.

Alternative to road may make gasoline for lighters. Important! It is impossible to tamper with the gasoline near an open flame source.

The only problem - together with duct tape, you can scrub and its most contaminated surface. No solvents or acetone can not be used to eliminate stains from plastic.

How to wash traces of adhesive tape with white spirit and acetone

No hostess, which is not a solvent lying around the house. Acetone or "white spirit" will always be in any home. Question - whether they will be able to clean the surface without damaging it.

That is why, before you resort to this means, think.

Comment

Mikhail Starostin

Team leader repair and construction company "Home Premium"

Ask a Question

"You can not carry out the cleaning of painted surfaces. The solvent is a colorless leave a great spot. However, if the surface is not colored because it contains glass, or metal, it is possible to use it. Scotch precisely dissolve. "

How to remove traces of adhesive tape edible vinegar and ammonia

A similar effect on the chemical product - ammonia. This corrosive attack can cause sneezing, but spotted it copes with a bang. If you are not sure that you are not the solution together with a spot of adhesive tape and even coating, the ammonia may be dissolved. Simply soak a cotton pad and wipe the surface.

The specialized tools can remove traces of adhesive tape with plastic

Today, the chemical industry is actively engaged in the development of this trading niche. There are many solvents and powders, which, according to the manufacturer to clean the tape easily.

Description of one of the solvents. Please note, the client is offered to remove traces of not only plastic, but also on the glass.

It is not only the powders and gels, but also sprays. The main thing is to read the instructions and the means to avoid contact with exposed skin or mucous membranes. The substance is sprayed directly on the contamination, or a sponge.

How to clean plastic surface means "Antiskotch"

There is a whole range of means, which removes traces of glue from painted surfaces, for example, an auto body.

If you are tired of the sticker - the best husband, erase it without a trace with the help of special tools.

The product is suitable for painted surfaces. Apply the material and waiting. Clay just wipe cloth.

Tip! Before using special means, read the instructions carefully. Possible to clean the surface to be cleaned you, it will not work. Aggressive substances included in the means just spoil surface.

Most of these funds have a pungent smell. Therefore, the process of cleaning is best done in the open air - outdoors or, in extreme cases, on ventilated the balcony.

The better to wash double-sided tape

Double-sided tape is especially the fact that the adhesive surface at it from both sides. Accordingly, it can be peeled off, its heating dryer, or ironBut in the latter case, it is necessary to lay the paper. After that, the surface can be cleaned with a knife or scraper, and after the solvent.

Festive decorations, sooner or later you need to clean up. Decorations for scrapbooking is not very easy to scrub off the table or glass.

What better to wash with tape plastic window

The technology is not much different from those described above contact methods.

Stage. Dissolves or is washed out.
Stage. Heat the hairdryer.
Stage. Remove with a scraper or erase the remnants of adhesive tape cloth.

We must act carefully so as not to scratch the surface, it is better to use scrapers with rubber pads.

Tip! If you do not have at hand scraper, you can use old plastic card.

Another way to remove the adhesive - use tooth powder, and to better prepare the paste. The fact that fluoride adversely affect the adhesive elements. The paste is applied to the contamination site and removed after 15 minutes residues together with glue.

If you do not know toothpaste can be used instead of stain remover. She copes with the "whitening" of oily stains on the jeans.

In addition, to get rid of spots of adhesive tape, you can use a simple iron (with stripping function) or steam generator. Heating often change the structure of the glue and you remove it safely to the surface.