🔨 How long screw screw: options to solve the problem

In production repairs often enough to deal with work that requires fixing of certain parts of the tree. Of course, the most common way the compounds are screwsThat do not require pre-drilling. However, not all so simple. If you use the long self-tapping screws, installation is not always smooth. Especially when it comes to hardwood, such as oak, beech or birch. In today's article we consider the easiest way to screwing in long screws without pilot drilling.

Existing ways of doing such work

When screwing the long self-tapping screws into the wood is often broken off cap. They can also break the splines on the bit or Screwdrivers. Many will say that it is easier pre Drill holes for screws, but such an option is not always available. Often drill the desired length and diameter is not at hand. And here come to the aid of domestic masters tricks that help to cope with this problem.

Option number 1: use of motor oil

This method has a right to exist, but only in part. The fact that conventional oil will not solve the problem. The only thing that can help with this approach - or grease Litol. And then, provided that the mounting location will be hidden. The fact is that even if the cap after screwing will be thoroughly mashed with time around the screw inside the timber will begin, as it were char, dark, and grease will leak out. This will cause the paint to find the location of the screw will swell. when pasting wallpaper this place may darken and grease out of the tread.

Option number 2: soap to help master

A good way to help screw the long screw into the wood without pilot drilling. You simply rub thread soap or dip into a thick soap solution. After this procedure, self-tapping screws will go down much easier. But here was not without problematic side.

The composition includes a caustic soap (particularly in many of its hardware) which reacts with the stainless steel, promoting corrosion. Of course this is not a quick process, but after a few years rust will do the trick. In any case, if the screw wrapped "dry", in 2-3 years it can be easily unscrewed, but the installation using soap it will be problematic. Therefore, use this method with caution, after carefully thinking.

The best way to screw the long screw

So getting to the main point of today's article. There is a simple and secure way to wood and hardware screwing long screws without pilot drilling. In fact, it can be compared with the previous one, but instead of soap are used conventional paraffin candle. Of course, they have rarely enjoyed today, but those who lived under the Soviets, when were often lengthy power outages, they are still in the closet. Although fit even candles for the cake.

Before you begin to twist metiz, its thread profusely rubbed with paraffin. When screwing, under the influence of the frictional force, screw and wood are heated, resulting in the melting of the wax. It melts and impregnates the wood around the screw. As a result, apart from the fact that the screw screw becomes significantly easier and protects the wood and the fastener threads. Therefore, no matter how much time has passed, it's easy to turn to replace the board or dismantle the structure.

Related article:

5 life hacking to work with the mounting fittings In this article from Housechief - 5 simple and very successful life hacking to work with different types of fasteners. How to simplify your work - read the publication.

Finally

The use of wax - the most suitable option if you want to screw the long screw without pilot drilling, although other methods are viable. And yet, if it is possible Drill a hole under it, it is best to do it.

We hope that the information set out in today's article will be useful for both beginner and experienced handyman, for the first time faced with a similar problem. If you have any questions on the topic, ask them in the comments below.

Do you have other ideas on how to do the job? Then please share with other readers their experiences. And finally, we offer to get acquainted with a short video that explains everything clearly.

[Totalpoll id = »55382"]