unwillingness to pay utility bills in full forced many to change, or rather reduced, readings metering instruments. If you too have decided to take advantage of this opportunity - do not rush. Let's see, what is anti-magnetic seal and why did it put on the counter. Perhaps, then your opinion will change dramatically.
To be or not to be: fine management company will give a definite answer
Read article
1 What is anti-magnetic seal and why it is put on water meters and light
2 The main types of non-magnetic seals
3 Types and features of the indicators established in the non-magnetic seal
4 Methods impact on the non-magnetic seal, which it is not necessary to resort
5 The average cost of non-magnetic seals and real consumer reviews
What is anti-magnetic seal and why it is put on water meters and light
Anti-magnetic seal is sufficiently complex product, which includes a special element reacting to short-term impact of a strong magnet or a long period of weak magnetic field.
Sophisticated device ensures reliable operation
The need to install these products is quite simple: the theft of electricity by consumers, water or gas. Many "yourselfers" were installed in the metering devices Neodymium magnetsTo slow down or stop the counting mechanism. As a consequence, the consumer is spending an unlimited amount of power, and the counter shows only a few kW. To correct the arisen situation management companies and began to defend their interests through non-magnetic seals.
Magnetic seal - reliable protection of meter readings
The main types of non-magnetic seals
On account of non-magnetic devices put seals of different colors depending on the type of the controlled resource. Red is selected for electricity meters. Blue - for control waterBrown - gas.
Attention! Normative document regulating the color and size of seals no vandal.
Water is generally selected blue
Products that are installed on the electric meter can be:
sticker (adhesive wafer), which is embedded in the indicator. These non-magnetic seal most widely. They can be mounted on the glass, and plastic. The main thing is that the base is flat. When this location is selected in such a way that when Reading the device registration the user has no difficulty;
The stickers can be of different sizes
rotary seals, Combines the functions of numbered seals and non-magnetic stickers. The indicator is placed inside a special retainer clips. The latter is made of transparent plastic. Even minor attempt retrieval latch wire or cause damage to the seals;
Rotary seals perform two functions at once
Seal-latch. Products similar to the previous version of the two functions. Due to the mounting of the "dovetail" the consumer is not possible to open the clip and change the length of the wire.
"Dovetail" will not allow open the clamp
Types and features of the indicators established in the non-magnetic seal
The indicator could cope with the task conferred upon him, he shall promptly respond to the impact of the magnetic field without the possibility of returning to its original state. Such changes can always be seen by the naked eye.
The most widely used of the capsule, inside which there is a special suspension. As soon as the product is under the influence of a magnetic field, it is inside starts to move and change shape, face breaking by volume.
Under the influence of the magnet material spreads in the capsule
Attention! Typically, the slurry composition includes particles of iron oxide, which, due to its ferromagnetic properties, begin to move under the influence of the magnetic field.
Is sometimes used instead of the capsule plate strips, which under the influence magnet change their color. Possible embodiment, when the plate via metallized powder formed a clear pattern. Once such a product is within the magnetic field, the image loses its sharpness.
The picture loses its sharpness
Attention! Restore the shape, pattern or restore the original color of the indicator in the home is not possible, so that in any case, your intervention is obvious.
Methods impact on the non-magnetic seal, which it is not necessary to resort
The network can find a lot of options circumvent established protection. We do not recommend the use of any one of them. But if you're still thinking about it, you know that you will get a penalty if:
expose the label to a high temperature. Manufacturers should consider such an option, and under the influence of temperature protection will be lost;
try the product to freeze. The cold also cause a protection violation, and you will get a fine;
disassemble the device or seal. opening the inspection traces will be visible;
place the magnet on the back side of metering device. Will not help. The counter may be stopped, for protection will be damaged.
Location of the magnet does not matter
Important! If you're hoping that will not be allowed in the checking apartment - does not help. With the new 2019 service providers are required to have control resource consumption, so that bypassing the apartments is mandatory phenomenon.
The average cost of non-magnetic seals and real consumer reviews
some consumers utilities independently seek help from a management company with a request to install protection. If you plan to do likewise, we offer to get acquainted with the average cost of similar products, and real consumer reviews:
Model
Characteristics
Fora 2+
Seal latch. Dimensions 30h21h7 mm. Triggering at 20 mT.
"AMP
Operate at 60C to + 80C. For water, electricity and gas. Size 25 by 70 mm. Tripping at 25 mT.
AM
Operate at 60C to + 80C. Size 22 to 66 mm. Tripping at 70 mT.
UTI
Size 68 to 24 mm.
Fora 2 + s>
Reviewed the seal-magnetic field indicator Energy-expert "Anti-Magnet":
More on Otzovik: http://otzovik.com/review_5732613.html
Review of the seal disposable number of rotary type Rusplomba "Twist-M"
More on Otzovik: https://otzovik.com/review_410371.html
Rusplomba "Twist-M"
Share in the comments if you have any experience on the impact of non-magnetic seal, and in what amount you paid a fine in the end.
