Cornice for corner baths: what types there are, attachment types, and how to choose

Going to the store to choose a cornice for a corner bath, people ask, "How not to to make a mistake with the choice? "," What do I need to know to choose the product that is suitable for a specific bathroom the room? ". Need to be fully knowledgeable about these products for the bathroom, their types, characteristics, methods of fixing - is the answer to these questions. There are a few tips to help make the purchase is not only useful but also enjoyable:

1. Before you go shopping, you need to perform all the necessary measurements in the bathroom.
2. Fastening strap will depend on the condition of the surfaces in the room. By purchasing the product to keep the curtains need to be taken into account as the size of the bathroom, and the quality of finishing the ceiling and walls.
3. It is worth thinking in advance about the conditions of the cornice. Will it be used as a drying towel? This will determine which mount to choose - the ceiling or wall.
4. No need to ignore the details that hold on the corner ledge in the bathroom curtains. The best choice would be a ring or open hooks. So the choice of curtains model will not be limited.

types cornices

All produced today cornices for curtains in the corner bath is divided into two types by the method of installation: Ceiling and wall.

Ceiling products are used less frequently because they are much more difficult to install on most types of ceilings. On concrete, plastic or rack ceiling it is installed easily, but on the ceilings, popular now, is extremely difficult. In addition, it is difficult to choose a ceiling cornice for bathroom corner kick that would look good with modern plumbing model. Therefore, more likely to use the product on the wall type.

Wall mount bracket with tubular structure and are popular because of their low cost, easy installation and the possibility to choose the product, even under difficult bath configuration. These strips are varied.

Varieties of tubular bars:

• Direct bracket with thrust flanges. This is the most common and inexpensive product that can be purchased at the store. But he looks good in the interior. But there is such a product and a small drawback - chrome-plated tube, which eventually wears off due to frequent movement of his rings. But you can live with, because there is such a cornice very cheap, and the loss of their aesthetic appearance it can be replaced.
• Corner eaves. His main problem is that to pick up the finished product for a corner bath is quite difficult. Most likely, you will have to order his custom layout, or spend a lot of time searching for the right for a particular bath model. By angular include semi-circular, U-shaped, L-shaped and oval products. Fasteners for such products can be as wall and wall and ceiling. Sometimes for imparting additional rigidity design it in one or two places further attached to the ceiling.
• Flexible cornice. Its design allows the use of a cornice in any form of a bath. It is made from an aluminum structure, combining both flexibility and rigidity. It can bend his arms, over his knee, without additional tools.
• Cornice telescope. Direct eaves length of from 1.3 m to 2m. it works on the principle of "pipe in pipe" and unwound if necessary. The design comes pretty tough.

Criterias of choice:

• size of the room - it determines the range of products - direct or corner product.
• Location bath or shower tray.
• The material lining the walls and ceiling.
• The style and design of the bathroom.

Despite its simplicity, the cornice has an important function in the bathroom, so you need a balanced approach to the issues of its installation.

mounting options

First corner moldings produced in two fixtures at the ends of the product. Over time, some manufacturers have come up with models of metal structures more detail - ceiling bracket, located in the middle of the cornice.

The bracket allows the tubular structure does not sag if hanger hung heavy curtains, or if it is used as a drying and towel holder. But as mostly used in bathrooms curtains of light materials, additional fixing is not necessary.

Important! Attach the eaves it is necessary with screws or dowels, so it will definitely be securely attached. From articles on suckers should be abandoned, it will not stick to the walls and can fall on his head in the most unexpected moment.

The choice of material

Plastic

The cheapest material used for making eaves. This is not surprising, because in spite of its resistance to moisture, often plastic strips quickly sag and deform. This happens due to sudden temperature changes in the bathroom. Of the benefits can distinguish various colors.

Aluminum

This material is durable plastic. It is resistant to corrosion, but its ability to easily bend and matte appearance not in favor of aluminum. In addition, when in contact with certain surfaces, this material will leave ugly marks.

Stainless steel

Plank of this material is the most durable, but it will increase the cost accordingly. If properly secure it, can withstand all conditions. In addition, this product looks quite respectable.

Chrome plated steel

From the previous embodiment, this material differs only topcoated - chrome. Its durability is identical stainless steel. Although this material is more beautiful, its most used in the bedroom or living room than in the bathroom.

Buying products

Decide what kind of model is needed, we can finally begin the fun part - buying. You can buy it in the store order and the Internet. For example, stainless steel cornice can be ordered online with delivery across Russia and the payment upon receipt. This is much more convenient than going from one store to another in search of the perfect option.

Installing the cornice in the bathroom with their hands

50 photo ideas bathroom design with cornice