Rules for the choice of curtains and the width of the cornice: how to measure and calculate the length of the curtains

When it comes to choosing and buying the curtains, make sure the question is raised, how wide should be curtains and cornice. After all, if not properly do the calculations, the appearance will not be as presentable. It is important to take into account all the nuances: accurately take your measurements, add on extra centimeters, to take into account features of the material and so on.

window decoration

tulle and curtains size depends on:

1. type curtain (curtains or roman);
2. eave length;
3. the parameters and characteristics of the window opening;
4. the general ideas of the designer.

If one of these factors are not taken into account, it would be difficult to properly calculate the part of the product and the area. Accordingly, under the threat of an aesthetic part of the enterprise.

If the tulle is too short, it will not be able to fulfill their direct function - to filter sunlight and complement the design of the room. Especially it concerns the living room, because the flaw is evident, and spoils the overall impression of the mood.

If there is insufficient length of the curtains in the bedroom, they will not be able to fully darken the room. And excessive dimensions look untidy, besides, it's not safe. With them awkward to handle in the home, and they get dirty quickly.

Same story if properly selected for the width of the curtains: the functionality is broken, no aesthetics, the overall impression is reduced. A too wide curtains usually mean a sloppy appearance.

How to choose a cornice to fit the window

curtain width, the width of the cornice - usually different figures, because a hair's breadth of fabric sizes are selected for blinds, the others require an increase of draperies. But before you determined curtains, it is necessary to know how to calculate the length of the cornice.

Choosing them under curtains follows.

1. To the horizontal value of the window opening must add 15 cm. from each side. This means that the sum will need to add 30-40 centimeters.
2. But there are exceptions, which need to be considered: the ability of the material to drape and how the size of the window harmoniously fit into the environment. Should be increased to 50-60 cm, if it is too small and it is important to visually enlarge. And if the curtains are not predisposed to the folds, heavy, then you need to consider in order to make it convenient to move to the side, to give the light to better penetrate into the room.
3. If there is a large window you can choose the length of the gain less than normal, but it is recommended not to do shorter than ten cm from each end.

Misconception newcomers - the selection of the length of the cornice right next to the window opening, in which case there will gleam. And the curtains did not fulfill its intended purpose: to limit the amount of sunlight inside the building and interior design. After all, it will not have visual appeal, as well as gaps remain, from which usually try to get rid of.

Choosing the length of the cornice for blinds

Type of roll or Roman blinds usually involves hanging paintings directly in the vicinity of the glass. It should be closed completely without gaps, but also remain functional. That is, how to choose a cornice for curtains and calculate its length.

1. The size of the cornice is thought out so that the blind can fully close the window.
2. But at the same time necessarily taken into account, so that when you open it did not stop, and the slopes are not damaged.
3. Typically ideal dimensions correspond to the formula plus the length of 10-15 cm.

How to calculate the width of the curtains on the ledge

How to choose the size of the blinds on the window - Matters arising after the choice of the cornice. Baseline values ​​webs centimeters - width and minimum length without additional nuances. Based on these figures, each hostess calculates whether priplyusovyvat auxiliary sections, in which an amount needed.

Often at the same time the length of the cornice for curtains - a relative value, because much depends on the design, which does not always fit the full use of the pipe-fixing in the normal position. The bedroom is often mount curtains made from wall to wall, in other areas further away less. Therefore, the best option - orienteering model curtains, number of layers, the type of attachment.

How best to remove the baseline measurements.

1. The height is measured by means of a centimeter or roulette hanging position to the lowest point (usually 3 cm from the floor).
2. Width is measured with the same devices, only guidelines - the first and last bracket (they are often geared to most parts of the product).

We are finalizing the settings to the ideal widths

The width of the curtains - not only the distance from the first to the extreme of the hook, but also keeping the drapery, which the owner wants to do. Fluffiness and volume of folds depends on the area, the situation room. If the window is located in a spacious room, very tightly around it is not necessary furniture, a large amount of drape will look spectacular.

This means that you must take into account the following.

1. The rather big bedroom or living room often small windows, there are so many draperies inappropriate. The same applies to the doorway.
2. If the window decoration is characterized by a two-layer, the top panel should be longer than 15 cm, to make a more effective result.
3. If the room is not different spaces, but not too modest, it is possible to use standards that are considered the length of the cornice. Its duration (if two or three leaflets) are generally multiplied by a factor of a half. A long attachment for curtains from two to four meters are multiplied with values ​​of two and three, respectively.
4. If the size of the window and the room is not proportional, not standardized, it is possible to start from the type of material. Values ​​curtain segments is usually multiplied by one point and seven tenths, and the veil, organza with a print - on two. If the latter is the fabric without a pattern, you can safely multiply it by three.

Example of calculation curtains, if eave length 3 or 4 meters

When the curtains 4 meters wide, or even more so, at the designer's responsibility is considerable. After all, the overall box become the central part of the interior, it is important to arrange them properly, taking into account the rights and wishes of the owner. Therefore, in such cases usually chooses the path of self-tailoring.

To do this you must first measure the 3 or 4-foot attachment for curtains to see what will be the exact base figure, which then need to multiply with draping coefficient (CD).

Instructions:

1. Determine how many pieces at the same time need to sew.
2. Then cut them according to the figure, the allowances for the seams.
3. In some cases, when the fabric is most natural composition, it is necessary to give a centimeter or two on the fabric shrinkage after washing, ironing.

We calculate the width of the curtains at the long ledge

Curtains, aspect which one to three or more, typically more suitable for drape abundant. Therefore, it makes sense to use this factor - the CD. For example, to take this fabric for curtains, curtain has three meters, when it CY = two and a half. So these figures multiply and get the width of the curtains in the seven and a half meters.

But a piece of fabric breadth will have to do more than two or three centimeters at least to the treated joints and shrinkage. If the edges are with bias binding or other decorative elements, such additives do not need to. Also with artificial materials that do not give shrinkage.

Examples of correct calculation and design of windows

If the owner of a standard double-wing window, it usually has a width of one meter and forty centimeters, the ledge under it selected + 15 cm on each side. This means that the sum of the lengths of the window opening and the indentation is equal to 1.70 m. If we consider that most such windows is on the kitchen, the fabric is not heavy, strong drape it does not make sense, so the ratio can be two or so smaller.

As a result, the length of the eaves multiply two factor obtain 3.40 m. The blinds itself. A cut is necessary to add on to the processing of centimeters and shrinkage. It turns out that you need to cut three and a half meters wide on the curtains.

Output

The width of the curtain and cornice - an important component in the calculation in tailoring and installing the product, because it has to look presentable, and to allow the interior to look complete. If the window is large, it automatically becomes the center of attention, so it is important to make it perfect, because often for companies invited designers. They know how to take into account the nuances of the material situation and the size of the room, as well as accurately calculate the coefficients of drapery material.

VIDEO: How to choose a curtain width.

50 variants curtains of various sizes in the interior: