Iron with steamer

models Every self-respecting hostess should have a decent technique for ironing clothes, so her choice takes a special place. In our time, scientists have developed many different irons that reduce the ironing time to a minimum. Now most irons have the function of steaming clothes, because sometimes they come across such fabrics that do not succumb to ordinary ironing. Indeed, the time saved is worth it to overpay a small amount and buy an iron with a steamer. About how different models of such irons are, how to choose the best assistant and how best to take care of him will tell this article.

to the contents ↑

How

works Before buying a steam iron, it is recommended to learn how it works to make sure its simplicity and safety. So, here is the basic principle of the action:

• In the container located inside the device, distilled water is poured, from which steam will be further produced.
• The user selects the mode by which he is going to smooth out this or that material.
• The water heats up and starts to evaporate, the hot stream gets on the fabric, thereby, smoothing it.

Important! After the end of the procedure, it is recommended to give the iron some time to cool down, then to drain the used water from the device.

to Contents ↑

Pros and Cons of Steam Iron

Iron-steamer is the choice of millions of housewives around the world. Buyers give it preference because this type of economic equipment has proven itself in use, because it has much more advantages than disadvantages.

The ironing with steamer has the following advantages:

• The device can be used on weight without removing things from the hanger and without fear of damaging the fabric. This is very convenient, because even if a person is in a hurry, he can not remove the thing from the hanger, laying it out long on the ironing board, hastily stroking the shirt, and eventually marvel at the newly formed folds. In the same way you can iron tulle and curtains, without removing them from the ledge.
• The steam cleaner practically does not leave wrinkles and ugly yellow spots on the fabric, as old ironing does without the use of steam. Quality ironing will ensure that things are pristine freshness and softness, regardless of the type of fabric.
• You can clean children's toys, towels, pillows and other things that require special care with an iron with steam. Water evaporation does not harm the baby.
• The steam model perfectly cleans natural and artificial fur from dust and harmful insects. With her help, the mistress's coat will always look like new.
• Smoothing and cleaning from dust can not only clothes and toys, but also furniture. This can be done with the help of additional attachments, which are sold together with the device itself.

Like the rest of the technique, the iron with steamer has a number of drawbacks. Here are the main ones:

• In many cases, scum is formed inside the device and on its sole, it is not easy to get rid of, but it is possible. It is recommended to prevent the cleaning of steam appliances from scaling twice a month and use only distilled or at least boiled water.
• In rare cases, when using the wrong temperature mode, it is possible to adhere the fabric to the material.
• Sometimes, some scratches on the sole of the iron make themselves felt, forming small puffs on things. To avoid this, you should take care of the iron and use it carefully.
• No matter how qualitative the steamer is, it can not replace the ironing of some things with a conventional iron. For example, such things can be classic trousers, skirts with pleats and other things, the main feature of which are folds.

to the contents ↑

Choose the iron that is right for you

If the buyer decided to buy an iron-steamer, then you should pay attention to the characteristics that he would like to see in his device. You need to be sure for sure not to be disappointed in buying in the future. Irons differ:

• In size. There are both small road models, and large ones, which are sometimes difficult to raise.
• According to the power of work. Power directly depends on the price of the iron: the higher it is, the higher the ironing quality.
• Based on the steam feed rate. Also affects the quality of ironing.

Warning! The seller-consultant always intends to sell the product to the buyer more expensively, in this case it is better to disregard his advice and buy the iron that you need. And to do this, you first need to self-validate customer reviews about a particular model and find out which parameters of choice are in priority and which values ​​are optimal.

We choose the sole: what to look for?

Selecting for yourself your ideal iron with a steamer, you need to pay attention to the nature of its sole. It can be wide and narrow, and also consist of different materials, each of which has its advantages and disadvantages.

Let's analyze different metal types of soles, and the reader will compare them:

• Stainless steel. This type of sole is the most common among steamers. It quickly and evenly heats up, keeping the temperature for a long time. The main disadvantage is the possible adherence of the fabric and the formation of carbon deposits.
• Ceramics. Irons with such a sole glide very well, which simplifies the ironing process. However, such a surface, with careless use, may fall and give a chip that will affect subsequent procedures.
• Polymer material. It is very easy and inexpensive. The defeat is that this cover is not environmentally friendly. Although all manufacturers claim that the materials used comply with hygiene standards. To be sure of this, it is better to buy machinery from a reliable brand.

Choosing a cord - which option is the best?

A qualitative and convenient cord can directly affect the further operation of the proposed device. For example:

• Too long or too short a wire will interfere very much during the ironing process, which will affect the end result and your mood.
• Also note how the cord is attached to the device. Although now most of the cords and is deprived of the ability to twist( because they can rotate in any direction), but once again, to be sure of this will not hurt.

What is worth knowing about power?

Irons with steamer have many lines of difference, one of them is power. Consider variants with different number of watts:

• Usually, low power is observed in miniature, road models of iron. This type is absolutely not suitable for steaming things.
• An iron with an output from 1100 to 1600 W is ideal for home use, well suited for steaming various materials.
• Higher power steamers are ideal for complex materials. They are also good for absolutely any kind of fabric and is the best of its kind.

Warning! The power of the iron-steamer can vary from 1.2 to 2 kW.

Accessories that can include

steam steamer To make the operation of the device more pleasant, manufacturers have come up with some additional functions. They significantly reduce boring work and slightly improve the mood of the user.

Here are some of them:

• Auto power off. Plus this program is that the technology itself will shut down, if you forgot to do it. Delay of absence of any actions with the device before its auto-shutdown is usually a few seconds.
• Anti-drip system. During the procedure, water does not enter the surface of the tissue. This is very important if you have things from delicate fabrics on which such drops stiffen visible spots. For example, you can observe a similar phenomenon on silk.
• Self-cleaning. This function includes an independent descaling, which must be done from one to three times a month.

How to choose from the huge range of the same iron-steamer?

So, you got to the store and before your eyes a lot of different irons-steamers of different shapes and sizes. How to choose the same iron that you imagined some time ago? First, tell the consultant what kind of ironing device you would like to purchase. The seller will show models that fit this description.

The selection overview has now significantly narrowed. Tell you how not to get lost among different models and discover something new:

• The first thing you need to pay attention to the bottom of the device. Most buyers choose stainless metal as the basis, because it always keeps the set temperature for a long time. But no matter what type of sole you prefer, be sure that there are no obvious defects on it - scratches, chips, cracks.
• Pay attention to the shape of the handle. In the store you can ask to hold the device to make sure its convenience is just for yourself.
• Lastly, pay attention to the design. All are pleased to work not only with a quality, but also a beautiful iron with steamer.

to the contents ↑

Overview of

models Let's analyze the most popular models of steam irons with different brands and price categories:

• Braun TS 765 A. The power of this model is 2400 W.With the help of such an iron, it is possible to smooth out absolutely any kinds of fabrics. The soleplate of the iron is made in such a way that it is possible to combine the ironing and stripping procedure. Warranty period - 2 years. The price is quite high.
• Tefal FV3925E0.This iron differs power of 2.3 kW.With it, you can smooth almost any fabric. This model has a high-quality outsole that helps the device to slide easily over the material, ideally smoothing it, and there is no need to clean it. The guaranteed period of work is 2 years. The price is relatively low.
• Philips EasySpeed ​​GC1028 / 20.The power of the proposed device is 2 kW.The iron smoothly removes the folds. The sole material is ceramics, which also helps the iron to slide freely over the surface. Warranty - 2 years. The price is slightly below the average, suitable for families with state employees.
• Polaris PIR 2285K.Power - 2,2 kW.Provides high quality in ironing things. The sole is made with Easy-Slide technology, which promotes good slip on the material. The warranty period is 1 year. Price is the lowest of the proposed.

There are a lot of different irons on the market, but there is only one choice. Therefore, we hope that this article helped to understand the irons-steamers and made it possible to understand which device you want.