Make a rack of toys with their own hands: step by step guide

For the child, as for any adult room has a value of personal space, where he feels the little master. Accordingly, this tiny world must fulfill the individual needs of the baby. In the understanding of adults, there should be a light, clean and spacious. For the kid is primarily concerned with the atmosphere of the room, where the rustic him, first of all, with their favorite things. And for each of them shall be its place. Toy storage options, apart from the usual boxes, a rack. To make his own hands means that you can provide all the preferences of the child.

Benefits of creating a shelf for toys with their own hands

Furniture made in a factory, devoid of individuality, due to mass production. Production put on stream. Handwritten, the creation of items for toy storage has several advantages:

• the ability to satisfy the most demanding requests;
• combination with the common interior of the room;
• the original performance;
• confidence in the quality of the materials used;
• convenience and functionality.

Design and construction of the shelf for toys

It is hard to imagine a nursery without a rack. From birth, he is able to perform the function of storing personal hygiene items. As they get older the child, its starting to use for its intended purpose. On it there are toys, books, designers.

Design and construction of shelving for storage of toys should be chosen based on personal needs, as well as with the following requirements:

• resilience - structure must have good support;
• safety - no sharp corners and protruding parts will drive the risk of injury to a minimum.

Depending on the age of the child, toy storage system can be classified as follows.

1. Up to 1 year - as a rule, at this age the baby minimum set of toys, which is able to fit in one box or section with several shelves.
2. From year to 6 years - the most mobile and inquisitive age, making the functionality of a child's room and store toys of the system increases. Items for the game becomes a lot and to ensure the maintenance of order requires more space to accommodate them. In this case, the need for a comprehensive approach to the issue: the creation of a few boxes for storing toys, interconnected.
3. From 6 to 10 years - an awkward age for gaming. Some children continue to actively play with toys, others all spend more time learning and reading books. Accordingly, the role of furniture changes. This can be separately put crate or box for storing toys or shelves that combine multiple tasks.
4. After 10 years - usually left a few favorite toys that do not take many places. Functionality is directed to the location of school supplies. It's best to keep them in hanging cabinets, open or closed shelves.

Depending on the sex of children will differ and baby rack design for toys. Boys preferred to select more restrained tones in the design and decoration minimized. Furniture for girls should be more romantic, in bright shades, with a variety of decoration. However, the object store toys should organically fit into the overall interior room.

Rack for a child's room with his hands initially can be made so that he, in the course of the child's growing up, will grow along with it.

Among the variety of types of furniture with specific functions for a child's room is isolated single boxes, crates, boxes Group, ottomans, hanging shelves to store toys and more more. The optimum is to place along the free wall niches, which can be gradually increased in number.

Necessary materials

Depending on the type of rack, will vary the materials and tools used in the manufacture. It all depends on the imagination. The easiest option for the manufacture of children's furniture store toys - from fabric stretched over a frame or thick cardboard. Such a task would be feasible even mom baby. Selecting the same fabric should be based on the capacity for strength and durability, that is, have a tight weave. Such species include poplin, calico, satin, denim and synthetic leather and fur. On the availability of skills and abilities may create an item of wood or twigs, chipboard, plastic. For convenience, equipped with rack and wheels covers toys.

In addition to the basic materials needed:

• glue - Clerical, PVA, for gluing pieces of wood and plastic;
• colored paper and cardboard - for decorating items;
• wire skeleton - for the manufacture of objects made of fabric;
• plywood - for the rear wall.

Stepping manufacturing

To determine the type, design and construction of the rack for storage of toys, it is necessary to fulfill his sketch. Owning great artistic ability in this case is not required. It may just be a sketch, which will be marked with the size and overall dimensions. From these data, it calculates the required amount of material.

Production of tissue variation does not provide for the construction of special patterns and patterns, usually marking, taking into account future dimensions, is applied directly onto the fabric.

For an object consisting of three vertical flanges need 1.3m of fabric with a width of 1.5. Of this amount, and cut out the cut, with the seam allowance 1.5-2 cm, elements of the following dimensions:

• flange - 4 pieces measuring 30 * 60 cm;
• side parts - 6 pieces measuring 30 * 30 cm;
• cardboard inserts - 4 pieces of 28 * 28 cm;
• Braid - 1 m.

Details shelves fold in half and stitched by a pocket, on the principle of pillowcases. Then, interconnected side parts. The insert pockets paperboard for strength bases. To the top of the finished design is sewn braid and ties for hanging in the right place.

This type of rack is convenient in that it is fully mobile, and soft side walls, devoid of framing supports allow to fold it concertina. Shelf ideally located in the closet, if its purpose is to store baby supplies. Equipping design side pockets, there will be additional storage space. This type will be a good alternative to the usual box.

Production versions of wooden boards or chipboard require greater skills such as plumbing skill.

Fabrication starts with the carcass walls: lateral, upper and lower. They are cut out of chipboard approximately 16mm thick, according to size. and ordinary plywood is perfect for the back wall.

The next step - production of shelves with dividers. On the finished parts are cut and folds in the right places are made grooves. The joints are glued with special glue for wood and well dry. For reliability design elements are tightened inside the metal area. Boards should be provided with a good angular compound which can be equipped with additional studs and eyelets. Sample operate chisel or a chisel.

Now you need to connect the shelves and vertical partitions using nails and glue addition. Intermediate shelves interconnected wooden studs. For this to be done through a hole in the board frame and shelves in the nest long drill two thirds of the size of the studs. They put on the glue. The rear wall of plywood nailed.

To equip design boxes, it is important to accurately determine the size. Installation is for special furniture castors.

Finally, the finished structure is treated with sandpaper, available shpaklyuyut openings, excess glue is removed.

Wooden model has a fairly heavy weight, and therefore, in order to avoid falling and injury, it is necessary to attach to the wall with metal corners. Thus, stability is ensured.

decoration

Depending on who the target audience Storage Rack children toy - boy or girl, as well as the interior of the room is carried out and its decor. But, despite all the strict rules, he has to give the baby a feeling of joy and comfort. Any variant can beat decorative elements such as butterflies, flowers, ribbons, typewriter or tale characters. They may be made of cloth or special paper and pasted on the finished product. It may also be an element of the finished decoration, store-bought.

• The finished wooden products, after finishing the work, can be painted in the desired color, lacquered desired shade.
• Elevations of boxes can be made directly using a colored chipboard.
• As the design is well suited installation melamine edge. For this purpose it is necessary to attach to the end portions and iron hot iron. Once she is well enough entrenched, residues are removed with a knife. Another type of design is to install a baguette. So rack will look more neat and interesting.
• An interesting option would be to offer your child to decorate your children's bookcase.

According to psychologists, from an early age the child must be accustomed to the order. And this, in turn, spread out and placed in its place personal items and baby toys, forming a single storage system. Having a separate space will be helpful in the case if a small member of the family does not have its nursery. And the evening gathering toys can be transformed into a kind of ritual.

VIDEO: Shelves for toys

50 photo ideas how to make shelves for toys with their own hands