Purchase furniture for the baby's room, especially from natural materials, can be quite expensive. In the store or online is not always exactly the option that will like. Chair and table made of wood, you can create your own. Work does not present difficulties if to prepare all the necessary parts and tools to use ingenuity and imagination. The reward for work - a unique product, the most comfortable for the baby and practical in the home.
Chair and table made of wood, you can create your own.
Content
- 1 Benefits of creating a stool with his hands
- 2 Materials and tools
- 3 We determine the design and construction
- 4 The manufacturing process: step instruction
- 5 decoration chairs
- 6 VIDEO: High chair with his hands
- 7 50 photo ideas for design highchair with their hands
Benefits of creating a stool with his hands
Chair with his hands much cheaper and made of his own sketches will be responsible conceived parameters and the desired degree of comfort for the baby.
The reward for work - a unique product, the most comfortable for the baby and practical in the home.
All parts are made of wood can be purchased in specialized departments of hardware stores. You will pick up boards and bars the right size.
Chair with his hands much cheaper.
Highchair, created his own - this high-quality furniture for the baby. In the process, you consider the size of the seat and backrest, the most comfortable for the growing baby, check the structural strength directly at home.
All parts are made of wood can be purchased in specialized departments of hardware stores.
Created with his own hands a wooden high chair can be decorated to your liking, and not be satisfied with a turnkey solution the purchase of furniture.
You will pick up boards and bars the right size.
Materials and tools
We need a variety of materials to create the chair. Among them will be manufactured individual parts. First of all, it's wooden blocks and dosochki of which is going to the frame, the seat and backrest. Instead of natural solid wood can be used chipboard or plywood, but these materials are short-lived. For fixing self-tapping screws, take in a sufficient amount. Need sandpaper of medium hardness.
Highchair, created his own - this high-quality furniture for the baby.
Size bars (length):
- support legs - 20 cm;
- Strap coupling seat frame - 20 cm;
- jumper strap back - up to 20 cm.
Created with his own hands a wooden high chair can be decorated to your liking.
The manufacturing process used for the legs the thickest bars section of 5x5 cm. For planks take items in half diameter smaller by reference.
For planks take items in half diameter smaller by reference.
seat board parameters (height and width) - should also not exceed 20 cm. The dorsal portion may be somewhat higher, but preferably - less than 30 cm.
Of plastic products we recommend to give two reasons:
- they are less durable;
- sustainability of such products completely unproven.
seat board parameters (height and width) - should also not exceed 20 cm.
To make a chair with your hands, you need the right tools:
- screwdriver;
- screwdriver;
- jigsaws;
- hacksaw on wood.
The dorsal portion may be somewhat higher, but preferably - less than 30 cm.
Assembled chair "demand" of the original decor. In addition to the version with thread, you can use paint or other materials to put a picture or applique. For an accurate drawing of the image will need a stencil.
Assembled chair "demand" of the original decor.
We determine the design and construction
For wood products, you can come up with any alternative. Rental is usually done with straight legs, and the following forms of spinal structures:
- solid square or rectangular;
- a truncated cone;
- straight-through (with a strap with a jumper).
For an accurate drawing of the image will need a stencil.
For details of the selected design solution is treated in accordance with it.
Creating a product with their own hands requires careful preparation. First be sure to make a sketch of the project. Picture clearly circuit connections of all parts individually with the calculations of the cross sections and lengths.. Following the outline, you recreate the model in reality with precise parameters. Chair, which met all sizes designed to be "just right" baby, will not cause inconvenience.
For wood products, you can come up with any alternative.
Certain models are created with the expectation that a child sitting at the table together with other family members. In this case, for the product selected high legs which are mounted not exactly vertically relative to the seat and the floor, and more broadly. The lower part of the chair will look like a truncated cone, connected to the sustainability of wooden bars on the perimeter. The upper part will be approximately 30-35 cm below the level of the table.
Rental is usually done with straight legs, and the following forms of spinal structures
If there are certain skills you can collect folding the product. Such items are easily removed if necessary storage space.
For details of the selected design solution is treated in accordance with it.
The manufacturing process: step instruction
After preparation of the drawing with the exact parameters of the start to collect a simple chair.
- Calculate the exact scheme leg length, saw off the excess with a hacksaw.
- Saw-sized jumper bars that will fix the frame in the seat area.
- Connect them with the support structure. In order to strengthen the glue, add furniture.
- Attach the pre-fitted on the size of the backrest and the seat with the help of self-tapping screws.
- All parts of the tree must be sanded, so there was no rough edges and burrs.
Chair, which met all sizes designed to be "just right" baby, will not cause inconvenience.
If the items are out of proportion, "Fit" for their design scheme with a hacksaw. To chair, created with his own hands, it was comfortable, ask the kid to sit on it, ask how he feels comfortable.
If all the dimensions have been defined correctly, the child like new furniture. That the parts are smooth, once again walk on the surface of sandpaper.
Certain models are created with the expectation that a child sitting at the table together with other family members.
For coating products, use only harmless compounds - special coating for children's furniture, eco-friendly and has a certificate.
The upper part will be approximately 30-35 cm below the level of the table.
After the exterior trim varnish give a chair to dry well, a day or two. You can then proceed to the decorative trim, if conceived. If it is to apply a thread, the coating made after the completion of the art processing and sanding parts.
decoration chairs
Thread, use a jigsaw. You can make a decoration in the form of a flower, cut it back for the center, or any geometric figure. Preliminary on the future site of the decor make pencil markings to thread turned out flat. Can be carved portion such as the legs and rest. The angles of the seat can be rounded using a jigsaw and sandpaper.
The manufacturing process used for the legs the thickest bars section of 5x5 cm.
Top can also do not strictly rectangular, a truncated cone, rounded, composite. The latest version will need additional bars and cross-bars - one or two. Fix them through special holes in the joints of the spinal skeleton. This is a fairly time-consuming process, but you can choose that option.
For fixing self-tapping screws, take in a sufficient amount.
All actions for the treatment of parts must be performed before the assembled chair - so the work process will be faster, easier and more accurate.
If there are certain skills you can collect folding the product.
To make their own hands nursery furniture looked interesting, can be applied to the seat back and drawing. To do this, you need to use safe paint. The color scheme should be bright, cheerful. On wood furniture look great simple designs, floral patterns, imitation of children's toys, such as cars.
Instead of natural solid wood can be used chipboard or plywood, but these materials are short-lived.
Due to the fact that the dimensions of the product are small, large picture will become a focus, attracting the attention of the child - he would like to sit on such a beautiful chair, or indulge in a game breakfast.
In decorating, you can use application - adhesive films commercially vibrant enough.
The image will appear even if you use pre-cut paper or thick plastic stencil.
In decorating, you can use application - adhesive films commercially vibrant enough. The image will be monochrome or multi-color - it depends on your imagination.
First of all, it's wooden blocks and dosochki of which is going to the frame, the seat and backrest.
The decoration of the seat or the dorsal part of a children's chair is not recommended for bulk (protruding) part, both small and large. Firstly, it is uncomfortable for the child, and secondly - they fall off rapidly with frequent use of the product.
We need a variety of materials to create the chair.
VIDEO: High chair with his hands
50 photo ideas for design highchair with their hands
