Table of cut down a tree with his own hands: Stepping process photo ideas

Not everyone has the power to see in the block of marble or the same piece of wood something majestic. Even fewer people able to not only see, but to realize it. Make a table of the saw cut of the tree - a difficult task, but it is real. Enough of a desire to achieve the goal.

Opting for a natural furniture for several reasons.

• Furniture made of natural materials, soothing natural hues positive effect on the mental state of the owner and his emotional state.
  
  

  Such furniture improves the atmosphere in the house.

• Wood products environmentally friendly. Given that modern furniture is made from toxic materials.
  
  

  Environmental friendliness is a clear advantage.

• Savings in material and payment services master, if done by hand. handmade product is very expensive, and not even because of the price of materials, but primarily because of the designer's services wizard.
  
  

  Table of saw cut tree will be a reliable and original element of your home decoration.

• Individual design. Each saw cut is unique. And it keeps a life story that engraved in the figure.
  
  

  Many saw tables with tops of the cut down a tree, but few know that this unusual variant can be done independently.

The only drawback of the difficulty of the choice in favor of the interior selection. Undoubtedly, the table will be bright detail, but agree that the estate a la "baroque" or "high-tech" it will look weird.

Choosing a table design

So, the first thing that you need - this time. Such crafts require perseverance, carefulness, and thus expensive and time consuming. But then they will be nice to look at the fireplace!

The choice of worktops is determined by its shape.

• To round needs a lot of space. It should be considered.
  
  

  If you have enough space, round version will look great in the interior.

• Suitable for a large family oval model.
  
  

  For this table the whole family will gather for dinner or to spend family holidays.

• Do you want to create a little coffee or coffee table for the living room?
  
  

  For such tables need a little oval.

• more versatile — rectangular shape.
  
  

  This form allows you to simulate the folding or portable models.

As you can see, the choice of countertops due to the purpose and features of the room.

Variety of tables on the number of legs.

• Pillar (one leg).
  
  

  Optimal selection round tabletops.

• Dvunozhny (two legs).
  
  

  For fixing the support mounted between the legs.

• Traditional (four feet).
  
  

  The most stable option.

There are many solutions modeling. It all depends on your imagination and desires. This is all your idea. How do you want to see the result?

So you've decided on the design. Sumptuously! But now you need to prepare materials - in fact, that from which and the table will be placed. Primarily required cut down a tree.

Also need a piece of plywood for the base, epoxy resin and hardener to fill the voids between the SPIL, carpenter's glue and elektroshlifovalnaya machine.

Ideal saw cut: where to find?

Master newbie thinks that the creation of such a product come out enough in the yard or in the woods, find a suitable piece of wood and cut into "circles" for decoration. But not all so simple.

But if you make a mistake, you have to start all over again, as with cracked discs impossible to work. You can find a provider on the Internet. The main advantage of ready Spila is that they have already been processed and after your purchase you can begin to realize the vision.

The only drawback - the processing problem. Feature furniture made with their hands, in that it is unique, and there is only one. When selecting a saw cut is necessary to consider the future drawing most countertops.

Sam saw cut pattern is also important. After all, it is the highlight of the future product. Ideally, for more convenience, draw the layout, not to improvise, and know exactly the expected result. Then you will avoid disappointment in the final result.

Choose the right material:

1. Spilite must be dry and preferably - from wood resistant to moisture.
2. The workpiece must be free of knots, as they can break away.
3. Pay attention to the thickness of the saw cut. Too thin may break, and the fat will weight crafts, make it rough.
   
   

   It is better that the thickness was from 30 to 50 millimeters.

4. Avoid low on material prices, as very often the cost — it is an indicator of quality. The product of the low-grade material will last long. Why waste time and energy?
5. Each end must be well pasted, so you need to purchase the optimum amount of adhesive that do not save it in the process.
6. After working with the sander need sandpaper, its grain needs to be 120 or higher.
   
   

   Adhesive resin for wood.

Instructions for the production of table

Design selected, tools and "consumables" at hand - now it is time to present men's work. More precisely go directly to the technical part.

1. First, prepare a material. Debarked and all irregularities. Roughness should be minimal, so this step can not be run in a slipshod manner. The instruments will need a flat screwdriver or chisel, gloves (not to injure hands), metal brush, sander, sandpaper.
   
   

   As a result, you should get the perfect processed saw cut, without knots and bark.

2. Create a base. Fixing to the ground carry out in upholstery screws. But be careful not to damage the structure.
3. Further, recording all the wooden elements joiner's glue in position - as a saw cut, and legs.
   
   

   For the strength of the holes, apply carpenter's glue, and then secure each leg with long screws to the surface of the table.

4. Before filling the resin sections, on the edge of the countertop must be done bumpers. Fill any voids with epoxy resin, its color may be worked by adding additional elements to the composition, thereby achieving the necessary shade for the table: coffee color (bronze powder and carbon black), white (chalk), black (black), gray (cement).
   
   

   You can buy pigments of different colors.

5. After the resin has hardened, it is assumed polishing surface. Perform it with great care so as not to destroy the results of previous works. The result will be a table with a pronounced pattern saw cut.
   
   

   In the process used sander and sandpaper.

6. And finally, there is only varnish. You want to output your work served as long as possible? Then the choice - of polyurethane varnish. Naturalness can be achieved by selecting the clearcoat. As an alternative to lacquer can serve as natural oils: linseed, linseed oil, decorative oil.

To implement such a project is not so easy. Moreover, it is persistent hard work, in the process, which from the master requires patience, dedication and hard work. But this element of the interior will attract much more attention than the store bought a boring piece of furniture.

Furniture made with their own hands - pride for the host

You have created a great product from a tree. But the main question wondering where to put it? Can put it in the living room or dining room and just cover with a cloth. But is it necessary to hide such beauty, it is in the highlight of the countertop.

Interior style, in which the table will look appropriate.

• Rustic. It is called country.
  
  

  This style is characterized by simplicity, so your creation will not be lost among the other furniture.

• Scandinavian. Style is moderation paints and thoroughness.
  
  

  Wooden table - exactly what you need.

The ideal solution would be a rustic style or Scandinavian, but you can show a little imagination and taste. Be designers of his house. Let the style of your home will be different.

VIDEO: Coffee table from an old maple trunk.

50 photos of the original ideas of tables made from cut down a tree: