Sew a pillowcase on the pillow steps: with the smell, with ears, round

Without bed linen man can not do. For pillow cases, sheets, duvet covers do not make a pattern on paper. The drawing is done directly on the fabric. And the questions, how to sew a pillowcase out of a single piece of fabric, or make it a patchwork patchwork, are rare. To cope with this task can any, even the most inexperienced needlewoman - does not require complex work with the construction of the pattern! Cut squares / rectangles of fabric easily.

To make this kind of bed linen can be of any type on the buttons of lightning, with the smell. Ensure the foregoing and try to sew a pillowcase on their own as possible following the instructions in this article.

Necessary materials

Before sew pillowcase necessary to prepare the following materials.

1. Tissue. For this purpose, a suitable satin, calico, you can use silk, cotton, etc., Which are selected, picked up scraps.
2. Sewing machine.
3. Yarn suitable in color and texture.
4. Tape measure.
5. Pencil, chalk lines for.
6. Scissors and pins, which are fixed pieces of tissue.
7. Other accessories, if you need it.
8. Calculation of fabric consumption for the simplest type of pillow.

Consumables must take the calculated amount, plus 5%. Pillow 50 x 50 cm must be 1 m plus 5 cm. If pillowcase is sewn with the smell, it is necessary to add tissue to the smell.

It should be remembered that the stores in the sale of material are cut unevenly or even tearing, which sometimes distorts it. Because experienced seamstress take about 10-20 cm more than the planned amount.

Now it is necessary to understand the instructions for making this bedding element.

Rectangular pillow with scent

How to sew a pillowcase on the pillow? Sew such bedding is possible in different ways. Here is one of them.

1. Performed gateways extreme ends. They are usually two.

   Buckled sections, stitched by

2. The product formed face outward so as to be ready to use.

   Put the fabric face up, measured from the left side 70 cm and bends the edge

3. Fixed side pins. Held in chalk, pencil flat line where the seam will be performed.

   Fold the right flap pillowcases, grind sections, allowances seams are sewn zigzag stitching

4. After this thing turned inside out, stitched by again to the edge of the facial suture was inside. In this processing is not necessary to sew overcasting. They will all be hidden inside. This scar is good in that when a so-called sewing Rulik which does not allow to deform the article during washing, ironing.

Pillowcase with "ears", a master class

Correct these beautiful blankets called Oxford (with "borders"). tailoring the rules they are not as easy as normal, with the smell. Consumption in this case is a little more.

Sewn product usually set to double, the width of which material is used at least 220 cm. Before sewing are cut the desired rectangle.

Processed first short edge of a double hem. Edge bends by approximately 1 cm, smoothed. Podvorachivaetsja still approximately 2 cm proutyuzhivaetsya.

Stitched by the product on the edge. If you prefer, you can leave the edge of where the lightning will. Then, the double seam with a width of 5 cm.

Case is inverted, proutyuzhivaetsya of scarring. Take a ruler, shallow held straight lines spaced at 5 cm from the edge of the perimeter of fabric, stitched by. Pillowcase with "ears" is ready.

If you do not have enough fabric, you can sew a bag with a zipper. In this case, the machine is Basting seam where will buckle. The tissue was then unfolding, smoothed to scarring of the material lies flat. Above the rumen laid down zipper lock half disclosed. cloves line should be based strictly on Basting seam. On the machine is installed foot for zipper, neatly stitched. Then halfway through the open zipper product is turned out.

Pillowcases for round cushions

Besides pillows used for sleeping, often in the apartment has a sofa decorative. They come in very different shapes: round, square, in the form of a flower, and so on.

For the bean bag cover did not make heavier than for a square. For it is necessary pattern. For manufacturing such a cushion pillowcases measured diameter, added approximately 1.5 cm for allowance for seams. Pattern pinned down to the canvas, cut out part of the front side cover.

Across the pattern held the line for lightning. Then, for the wrong parts cut pattern into two parts. Damn line for lightning on the canvas. Part of the pattern apart, cut pieces to fit seam allowance, including a straight edge.

Cleave and stitched by a rear seam left an opening for lightning. Next disposes pillow case just as in the case of a square pillow.

decoration

There are many ways decorative pillowcases. Most just think decorating fabrics product applications. They can be sewn in advance of the final sewing.

Do the same worth in the case of manufacturing covers in patchwork technique. Scraps are cut, superimposed on the canvas of the future pillowcases / paper the pattern, are fixed. Sew they can then even manually. It depends on the manner of patchwork fabric. When the rags sewn fabric is ready, the fabric is sewn described.

If the cushion is decorated with embroidery embroidery / ribbons, it can be done with already completely sewn canvas by marking pattern on the outside.

Such patterns on pillows look very cute, original and do not require a lot of experience. Main patience for decoration - it is very hard work, which often have to do for a long time.

Video: How to sew a pillowcase with "ears" - a simple and fast way.