Dining table convertible milky guest
For small apartments furniture such as a table-transformer is indispensable. It is easy to transform from a compact magazine tables in a full dining table for several persons.
The coffee table is easily converted into a full table for receiving guests
Read our instructions and make sure that the assembly of the table-transformer is very easy.
Dining options and a coffee table-transformer with dimensions
Content
-
1 What is necessary
- 1.1 body assembly
- 1.2 Setting the lift mechanism
- 1.3 Installation of countertops and podstolya
- 2 Video: Table transformer. Assembly
What is necessary
Tools required for the assembly of furniture
To successfully build a transformer you will need:
- Phillips screwdriver or screwdriver with nozzles;
- hammer for furniture;
- fasteners and assemblies coming in the package.
Detailing the frame of the table and its legs
Box with fittings and fixtures
Despite the many proposals on the furniture market, the majority of producers the process includes the following steps:
body assembly
We are putting our table corner legs
All table legs transormera-assembly
Corner legs of two halves joined by screws or cams. Likewise harvested from short and long drawer side housing.
Scheme housing assembly
Detailed hull assembly process
Fasten the legs to the body according to the instructions
IMPORTANT! On the legs and drawer side made special holes designed for simultaneous assembly lift and tie the entire structure. Check after the assembly whether they match.
The collected base with legs
Nail the plastic glides to the lower ends of the legs. On the upper ends of the drawer side set the shock absorbers, softening blow countertops when it is folded.
Nailed to the legs heel cushions
Setting the lift mechanism
Scheme installation hoist
Give a lift to working position. For this:
- spring hook at one end for opening within the elevator;
- paste into a groove located on the opposite side of the stud, vdet second end of the spring;
The spring in working order, assigned to the mechanism
- tighten screws lifts to long, then a short drawer side.
Anchored spring for the table-transformer mechanism
Mechanism in a quiet undecomposed state
IMPORTANT! Feet holders intended for folding tabletop, are higher than those made for podstolya.
The mechanism driving section to the upper position
Installation of countertops and podstolya
Mount lower part countertop
Establishes the basis for a large part of the countertop
Screw the bottom slat table top and notebook platforms to podstole holders. On the outer side podstolya set absorbers, extinguishing shot when folding tabletop. Movement outside-fold leg lifts in a box. He closes the bottom of the countertop.
Fix an upper movable part countertop
Set on top of the other half so that the end hole hidden hinges were on the one hand, and their center distance was minimal (about 14 mm). Carefully insert the loop and secure with screws.
Concealed hinges for fixing the table in the assembled state
you assembled the table last a long time. Do not forget once a year to pull its fasteners, clean the surface with a soft dry cloth or a special polish for furniture.
Coffee table version or folded
The process of transformation from a coffee table into a table for receiving guests
Dining option or a table in the unfolded form