Doing growing chair "Humpbacked Horse" with his own hands: instructions

Children's health depends on many different things. For the younger generation it is important to not only have a proper diet, exercise and develop thinking. An important factor is the correct posture when sitting at the table. Correct posture forms the skeleton of the child and gives a balanced development of the body.

Growing a chair at the same time cope with multiple tasks.

1. It is an orthopedic furniture.
2. It allows you to use it with 6 months.
3. Saves family budget.

Chair humpbacked little horse has only one major flaw - the high cost with the purchase of the finished product.

Skilled craftsmen who are behind some experience in the assembly of furniture with his own hands, will not be difficult to execute this model alone. Those for whom the growing chair will be the first independent product, we recommend you carefully read the instructions. You must first to estimate not only the opportunities but also the availability of the tools that are indispensable in the process.

Materials and tools

For the manufacture of a folding chair that grows with the child, fit, not all materials. The product can be made from either plywood or from treated wood. Make a chair from the array as possible, but it will be very bulky and heavy, which is inconvenient for the child directly. Therefore, the best material is still considered plywood.

For racks need plywood at least 22 mm, on the basis that each rack will go on two pieces to be subsequently glued. Seat, footrest and back rest can be made of plywood 22 or 16 millimeters.

Fixing parts of a chair for the baby made using hexagonal bolts and nuts furniture hidden.

Tools, hardware and materials

1. hexagon bolts;

- 2 pcs. size 6h70 mm,

- 2 pcs. size mm 6h50.

1. Blind nuts;

- 2 pcs. 10x20 mm,

- 2 pcs. 10x12 mm.

For decoration of the finished product need - putty, primer, varnish or wood stain, paint the desired color. Decorating elements are selected at the discretion of the master. It is possible to make the seat soft upholstering of its foam and decorate the top upholstery. For very young children better upholster with leatherette or oilcloth to be able to clean the surface.

For the manufacture of a growing chair Children need the following tools.

1. Paper or paperboard for drawings.
2. Pencil.
3. Centimeter or roulette.
4. Wood glue.
5. Electric jigsaw with saws.
6. The copy milling.
7. Frazer.
8. Sandpaper.
9. Brush to paint.

Done right, the chair allows you to adjust the stand, seat and back in various combinations. Manufacturers of furniture lay in the growing chair at least 10-15 positions. The independent work is also necessary to focus on this figure.

Finished products project

Getting started begins with the creation of a chair of the drawing. To make the product their own hands for the child can only correctly calculate not only the size but also the angles of parts.

On the Internet, you can easily download the finished project or guided by GOST 19301.2-94, which describes what options should be at the tables and chairs for children can be made to curve.

Regardless of the source figure should perform pattern only in full size. Makes the preliminary pattern of all the elements on paper or cardboard. It is important to note that some of the elements of the chair for the child shall be the right and left, that is, "otzerkalivat" each other.

Step by step assembly instructions

Preparing a mold, the materials and tools you can safely get to work. Remember - the work does not tolerate haste and bustle. An experienced master knows that it is necessary to measure several times, weigh everything and then cut.

Stages of work.

1. Putting a mold made according to the drawing, to the plywood and cut out the first part of the side legs. Make the workpiece is necessary with a small margin of a few millimeters. This stock will prevent flaws in cutting.
2. With copy milling we bring the workpiece to the ideal size.
3. Cut another three feet to spare.
4. Fold all four feet stacked.
5. According to the first details of the perfect grind the remaining three legs. Such an approach would save time for turning of.
6. A glue between two billets and give them dry.
7. Fraser perform grooves on the inside of the legs. The dimensions of the groove should be at a depth of 10 mm., And width 24 mm. This slot has a key role in further adjustments of all the elements.
8. Exactly in the middle of the slot should be done through holes, which will be fixed seat and footrest. Make the holes must be at equal distances from each other. It is important to put a bar in drilling under the leg to avoid chipping and deformation on the outside.
9. Cooking runners. Slider to lock the seat or footrest in the desired position. They need 4 pieces - two on each side. Runners should match the size of his feet and did not look out for its limits - the height of 20 mm and a width of 24 mm..
10. The runner rounded corners and edges, and the trough is centered. The trough is designed to further inserts in his rack, which will be inserted into the legs of the slot.
11. Rail must be made of the calculation width of the trough into which it is inserted from one side and groove on the other side.
12. Slider and slats are glued and dried.
13. The runner is a hole for the screw that will secure the desired position.
14. Next, cut back and footrest. Seat sizes for baby selected on their own and depend on the age and calculated reserve. The form details can also be arbitrary - square, semi-circular or oval.
15. The next step is made back to the chair. The back may have a wide continuous surface or be made from multiple strips of various sizes.
16. Do not forget about the cross-bar, the clamping leg in the lower part thereof.
17. Finished parts are assembled is not the final method, but rather a method of baiting. This will help to assess the final outcome, and identify flaws that must be addressed.
18. If the chair for a child corresponds to the initial plans and drawings, it is necessary to disassemble and do final processing using sandpaper. We clean the surfaces to prepare them for painting.
19. Paint color is selected independently. Some craftsmen prefer to produce a primer, and then lacquered, thus underlining the existing wood pattern. Plywood, however, better to paint because it does not have any external pattern uniformity.
20. Dried parts are assembled into the design and are ready for operation.

Growing a chair for small children it can be equipped with armrests and a safety front bar, so that the child can not fall from it. These parts can be mounted using screws, and then remove from the chair. For classes for school desk armrests are not necessary, since the hands are always on the table.

VIDEO: Growing a chair Horse Gorbunok

50 photo ideas how to make growing chair Skate Gorbunek own hands