Each of us dreams of home comfort and coziness of a beautiful interior. Sometimes you want to dramatically change anything to change the situation.
Today, lacquered furniture is very popular.
Some items pity to throw away, they are still quite strong, but the unsightly look of dilapidated varnish. In our time, to carry out restoration of furniture, remove nail you can at home. And it will serve you for many years to come.
Such products look beautiful and give the interior solidity.
If you think that there superfunds remover varnish, Such a view is mistaken. When its production is not a basis, it is always different. Consequently, many solvents are produced.
Choosing means you should carefully to remove the nail and damage the furniture.
Should prepare carefully before proceeding with such a responsible business. Select method of removing a coating to prepare necessary materials and tools.
Primarily need protection - goggles, gloves, respirator.
And to remove varnish - remover, a brush to apply the drug spatula abrasive tape grinding machine, hair dryer construction, and polyethylene film.
The process difficult. For once the varnish is not removed.
In this case, use different methods. At their selection takes into account the following points.
- View foundations. It all depends on what you will handle - flooring or furniture.
- View previous coverage. When choosing a method, it is necessary to focus on the composition of the varnish, because of their composition, they are different.
-
The number of layers. When the multi-layer coating is required to exert the maximum time and effort, whereas to remove a thin layer not make much effort.
Information about how to remove the varnish from wood, can save a lot of copies of old furniture from vegetating in landfills.
Content
- 1 Several methods of removing the varnish from furniture
- 2 The process of removing the coating: step instruction
- 3 VIDEO: Removing of varnish from the wood surface.
- 4 50 photo-ideas wood furniture:
Several methods of removing the varnish from furniture
For example, delicate. If you want to clear surface very old furniture or surface patent, one would be the most acceptable coating by a stripper.
The most relevant method is to treat the coating chemical composition, so-called stripper.
These may be liquid, acetone, as a means of wide application, gels, any powders. Denatured best handle surface shellac.
More convenient to use a stripper in the form of powder.
It is diluted with water, the resulting paste is applied to the coating. Means must act within the time specified in the instructions. It is preferable to hold objects vertically, purification better will be held, and special gels are able to remove even the deeper layers. Finished the liquid will remove a few layers.
Old paint is removed with a spatula unsharp better plastic in the direction of the fibers.
The process of removing the coating: step instruction
You can see step by step process of cleansing wash. Before you start work, take out the drawers of furniture, remove the door, on the floor of the stele a lot of newspapers.
The main thing - do not damage the wooden floor itself, otherwise you will spoil the whole process of restoration.
We put on protective equipment, otherwise you get a severe sunburn. You will need an ordinary brush. The first step cover surface stripper in a single layer conducting brush only in one direction.
We proceed from the rule that the brush should be done in one place only once, without repetition.
For best results, cover with plastic film. We keep a few hours - it all depends on the number of layers. When a high-performance cleansing remover acquires a dark brown color and varnish vspuchilis.
The average waiting time effect of compress - from 1 to 4 hours, depending how many layers to be peeled.
If the work is carried out properly, it is easy to get away with surface. After removing the softened film varnish remove the spatula. If at first you are not retired, you need to repeat it.
It happens that the sandpaper can easily remove what's left.
Then you need to remove the remnants of funds. Take water (about half a liter) with dissolved therein vinegar (100 ml) and carefully washed off sponge surface and wipe with a cloth. Treated furniture left to dry.
You need to make sure that it did not get the sun's rays.
The next way - mechanical. He called Scratching and has a substantial negative side. This is done for a long time, thus it is necessary to exert maximum effort.
In other words, this stripping the lacquer layer with a construction tool.
He held a special purpose tool - cycle.
Cycles can buy or make your own hands.
If the layer is not thick enough, it is possible to restrict 80-100 grit abrasive tape attached to the sander. After processing the tape take 150 grit or higher and pass again.
This method is suitable if in the future will apply any other means.
Secondary method - heat. This will require building a hairdryer. It is able to heat up plane to a very high temperature - 600 degrees. He has the advantage - it is fast enough. Heat up surface and then scraped spatula. But here it is necessary to observe all safety precautions to avoid fire.
When the need to open all the windows, put on the protection of objects of hands and face.
that remove nail, Is used and the water purification method, the most primitive and harmless. Richly moistened sponge to wet the plane.
In most cases, cleaning of the lacquer can be done on their own.
After some time varnish It begins to dissolve. wet surface repeatedly treated with coarse sandpaper until the coating turns into a slurry. Furniture is well washed and dried.
Ways different to carry out work should be thoroughly and carefully. The most important thing - not to spoil the tree.
Prepared for the restoration of the furniture can be re-cover varnish. It not only updates but also contribute to the preservation of the external negative influences.
By following all these rules, you will get a high quality lacquered surface of the furniture, which once again will get its original aesthetic appearance.
Nowadays these pieces of furniture are becoming increasingly popular. processed varnishShe looks the most advantageous completely harmless.
This is important in interior design.
It is worth noting that it does not make sense to remove varnish with pieces made of particle board, as with cleaner will do the bulk plenochka that adversely affect the appearance of the product.
Perfectly cleaned natural wood.
In conclusion, I would like to give you some useful tips.
- If surface coated with shellac, it is a good result is obtained by using denatured alcohol, moreover, it does not take much time.
- Where multiple layers, suitable liquid funds. Due to the fact that they quickly evaporate, penetrate deep into the surface can not.
- If the scope of work significant, it is better to use powder because of the long term storage.
- To delete a multilayer coating suitable best toothpaste and gels.
Meth for removing varnish from wood surface.
Of course, most of us buy new furniture, wishing thereby to show how to keep up with the times, they have a beautiful modern furnishings, elegant interior. Individuals so demonstrate their material well-being.
It is not always better quality modern furniture old. And that is many times greater than on the parameters new.
Most simply can not afford to buy modern cabinets, wall units, sofas, chairs, tables and so on. D. Therefore, it is important to take good care of that furniture. And for good reason. Without a doubt, in a wide variety of products stores. But they are only vaguely resemble wood. Natural wood is difficult to find, and the price will be high.
Someone in the house has old furniture, it is necessary to try to refurbish it, save for years to come.
Updating the furniture in the home - not such a difficult process, as it may seem. Your desire, a little patience, and furniture sparkle with new colors, bringing you and your family a lot of fun. Besides, how cool do with his own hands!
VIDEO: Removing of varnish from the wood surface.
50 photo-ideas wood furniture:
