Hang kitchen cabinets DIN rail: operating procedure, photos

kitchen decoration today affects diversity. There are many ideas for kitchen furniture. Every woman aspires to create a cozy atmosphere in the house and in the kitchen - especially. For the hostess it as an office, where she spends most of the time.

Any woman knows how it is difficult to create a cosiness in the kitchen, lay down everything in its place, unless there are a variety of hinged shelves, lockers. And therefore came up with the kitchen wall, the kit that includes multipurpose cupboards, various stands, tables, hinged cabinets.

Materials and tools

These pieces of furniture are of great importance. They retain a place in the kitchen, have sufficient capacity. There are many things hold. Therefore, it is necessary to produce high quality and thoroughly fixing to the wall. Before you start work, you need to prepare materials and tools:

1. Base, to secure objects.
2. The hinges for the facade.
3. The elements necessary for the construction of cabinets.
4. Screws, nails.
5. Ties Intersection.
6. Tires.
7. Hinges and screws to install them.
8. Drill. If the wall is concrete, we need a drill with the function of the gun.
9. Tape measure, pencil, ruler.
10. Level, preferably long.
11. Screwdriver, screwdrivers.
12. Bits for drills, tools for the screwdriver.
13. Hammer.
14. Clamps, hacksaw.
15. Open-end wrench.

fittings for mounting select nuances

Not worth wondering how to hang cupboard in the kitchen, because today is a wide range of various accessories. But there are some features. If you hang on wooden wall, it is better to use screws with countersunk hardened round head. Noteworthy screws with double thread and a big step.

If the wall is made of bricks and concrete, use dowels and plugs, anchor bolts, gypsum and ordinary bolts. For plasterboard walls is better to buy dowels Molly.

Do not forget to prepare the wall!

Before you hang lockers, You need to prepare the wall, drawing a specific job:

• Line the bottom of a well, since irregularities have a negative impact in the performance of the entire installation;
  
  

  Use plaster or plasterboard.

• Be sure to complete all the work necessary for the installation of sockets and lighting;
  
  

  These points will be the basis for future work.

• On the walls must have already applied paint, wallpaper, tile. If it's new and the house can shrink, it is best to use plastic kitchen apron. It is easy to hide irregularities and is mounted on the liquid nails or screws.
  
  

  After hanging cabinets paint the walls will be very problematic.

The initial phase of work: how to determine the height of the suspension?

Before you start to mount lockers to the wall, you must correctly identify the height of their sample. The approximate gap between the top and bottom portion cabinets equal to 50-60 cm, and in accordance with GOST - 45 cm. If you mount lockers on the fridge or high brass wardrobe, Their height and show the necessary point linkage.

Also must take into account the quality of the wall partitions. In modern homes it is most commonly made of plasterboard. In this case, do not hang up cupboard it is very high - the wall can be deformed. In old houses ceilings may also be shabby. Walls will not tolerate this weight and will crumble. In this case, the furniture may fall, and you'll have to repair it or buy a new.

In most cases, design innovations can influence the suspension height. We're talking about the facade sets, where everything you need is included, and it is very economical.

Hanging on the mounting bar (rail)

Before you begin suspension kitchen cabinetsyou must remember that between the furniture and the wall there is a gap. It is necessary that the gap was the same both above and below. You need to install additional bottom rail cabinet.

This type of awning has a number of positive aspects, if you are hung on hinges and hooks. Firstly, it is very easy to do the layout for mounting rail installation lockers It can be produced with high precision. Secondly, the suspensions can be adjusted to the same disassembly and assembly will take place quickly and easily. Thirdly, cabinets form a flat line, without any gaps. Fourth, the ability to withstand all conditions, here they are distributed evenly.

But there are several disadvantages of this type of awning:

• This kit - sample and rake - is not cheap. But rather, it is not a major obstacle, because significant time savings;
• Between a wall and furniture gaps are formed.

How to reinforce the mechanism of "hitch-mounting plate"?

To begin to hang kitchen cabinets, You need to mount the hooks to the side walls of the furniture. To do this, use the adjusting screws. Hook should have a projection over the rear wall locker just enough so he could catch on DIN rail - 23 mm. Then we do a flat layout, note the place and properly drill the hole. For operation using a drill and an appropriate nozzle.

If you want to save, you can have the slats with small portions - about 10 cm, but only on condition that the wall is sufficiently robust.

In the prepared holes, trying to drive the dowels that are suitable to your type of walls, and thoroughly produce fasteners mounting plate. Now you can hang cabinets on rails, removing it before all the doors and shelves. Then perform a thorough adaptation module by screws in suspensions. Furniture connected between a coupler interbay.

Useful tools for drilling

Handyman always need certain tools to work in a private house, near her house, in the apartment or in the construction of his house. Many of them are not even worth acquiring if they do not require constant use. For example, drilling a plurality of different nozzles, which are much increase your drill functions and significantly expand them.

To get the exact size of a large hole across different workpieces, do some milling work will help a device such as drilling and milling attachment.

Next device, which is worth mentioning, is very expensive, but has the highest versatility. All tools that you have in the economy, whether knives, shovels, axes, hoes, and various drill, you will sharpen effortlessly with universal device for sharpening.

Holder with clamp. With it, you can lock the drill anywhere, use it with all sorts of devices, used as a mini-lathe, grinding machine, milling or grinding and polishing machine.

Also, all kinds of nozzles are used for drills. It can be stopsLimiting the depth of drilling, playgroundWith which can be drilled at a certain angle or perpendicularly. nozzles are available, which are adapters and extension different designs: with an offset angle, flexible.

Nozzles for cutting metal turn your drill into one of a kind tool. Some resemble cutting sheet metal shears, and others - other feature, for example, a roller-scissors. NozzleCalled "Cricket"How to cut through the metal.

There are also other nozzles designed for monotype works.

• To install aluminum rivets. There are types for the same type size, and have replaceable bushings for different calibers.
• A nozzle in the form of ribbons screws. With its help, you can greatly save time when working with drywall or when it is necessary to fix the other materials on the screws.
  
  

  Maximum time savings in series screwdriving.

• Belt sanding attachment completely replace the grinding machine, and the cost will be much cheaper.
• Do not be amiss to tip, with which you turn your drill to punch.
  
  

  It represents its percussion assembly.

• using tip "corner pruner" you canto cut a variety of cables, as well as the branches of the trees.
• Using a variety of nozzles, drill to replace you jigsaws, circular saw, pump, can polished surface, sharpening drills.
• There are unusual attachments.
  
  

  They can be used to sharpen pencils, clean the fish, the birds to pluck.

Whatever we use nozzles or, more importantly, to work enjoyable.

VIDEO: Fixing wall cabinets in the kitchen.

Wall cabinets in kitchen interior - 50 photo-ideas: