Banquette can be called a popular type of furniture for the hallway. Over time, its design has not undergone fundamental changes. This is not only a convenient ottoman, which can accommodate guests, but also a stylish piece of furniture, it will look great in a hallway, kitchen, bedroom and living room.
In stores a huge selection of soft poufs: with lockers, shelves, drawers. Each manufacturer makes out banquette at its discretion. But what if a suitable option for your interior is still not found? In this case, the question may arise: how to make a banquette with his own hands?
The principal device is quite simple stools - stool with padded seat.
Fabric tuck into the edges and fixed brackets.
Content
- 1 Advantages of your own custom banquettes
- 2 Necessary materials
- 3 Required tools
- 4 decoration
- 5 VIDEO: Making benches home
- 6 50 photo ideas how to make your own hands banquette
Advantages of your own custom banquettes
Banquette under the power to make anyone who has the minimum skills joinery and a good command of the needle.
Often the basis of the product is really a stool.
This product looks very decorative, but make it pretty simple.
Consider the pros homemade pouf.
- Firstly, you can choose your own form, color, size to your liking. It all depends on your imagination. Then you can create a banquette, unlike other counterparts factory that will add originality to your interior.
- Secondly, poof, made by hand, will cost you much cheaper than ready-made from a store.
- Third, you can make a banquette of the old furniture, which you were about to throw away (stool, coffee table), but so give her a new life.
- Fourth, to create something useful and beautiful always bring moral satisfaction to the creator. Making their own kind of thing, you can submit your work to visitors and get a lot of compliments, as a reward for your work.
Banquette more, permitting the hall size, produce no less simple.
From the selected fabric cut out a fragment of the desired value with an allowance.
Prior to joining the need to consider the design of the product and see what types there are. Banquette, you can choose the shape, material and size.
This will require minimal skills joinery and the ability to keep the needle and thread.
It is recommended to put on the bottom of the first sack and similar coarse material, and then fasten the foam - glue or a stapler.
Consider the main types.
- Forged.
More suitable for the interior of the baroque or empire. The product will have a forged, twisted base. Most often in these instances there is no built-in shelves, drawers and cabinets. Performed in the style of ottoman would be best to look in the hallway.
- Wood.
These types of products are often very functional: with built-in drawers and cupboards. It will look great in the hallway, kitchen or living room.
- With backrest.
This small sofa immediately create an atmosphere of comfort, especially if it is to decorate the soft pillows, made in the same style. This is the most comfortable and convenient option.
- Collapsible.
This type is more functional: can quickly understand. All the elements are fixed to the bolts. Therefore, for quick disassembly, the design will be common, and not carrying a decorative feature.
- With drawers.
Very useful copy of the hallway, which saves space.
"Raw material" for products are wood-based materials.
For a flexible foam seats cut out a fragment of the desired size.
To manufacture the banquette, must also be found species with upholstery, which may be used during operation.
- The cloth.
Banquette can obtyanut silk, cotton, linen fabrics. Textile poufs undemanding in care. The variety of colors is an advantage of such an upholstery.
- Leather.
This material is not suitable for every interior, but will look very expensive and elegant. Among the shortcomings can be identified high price, complex care.
- Artificial leather.
This option is cheaper than the previous one. It will also look noble as poof of genuine leather. At the same time in the care of leather is not capricious. Although the life of it much less than the natural "brother."
Forged model or furniture with iron structure will require a much more serious skills and experience.
The easiest way to produce a banquette of old furniture or wood, as a model and having forged iron frame will require more serious master skills and experience.
Filling material, usually foam acts - it is sufficiently elastic and keeps its shape for a long time.
Attractive appearance legs ensure the use of manual cutters.
Necessary materials
To work you need to have the following materials.
- For pouf with feet need a wooden beam - 30 * 40, 30 * 50 mm. or, if available, you can use the old screw-in legs on a stool, table or bench.
- Plywood.
- Fastening materials: staples, screws.
- Varnish, stain or paint.
- High foam.
- Fabric or leather stitched.
- Fabric for finishing the invisible side of the seat.
- Buttons.
- Cloth cover (if required).
If constructed very soft seat, especially with Karetnaya tie, apart from foam used also sintepon.
If it is the model with legs that attach to the bottom of the 4 strips of wood so as to project the edges of 1-2 cm.
Required tools
To ensure that you have the following tools:
- drill, screwdrivers;
- screwdriver;
- hammer;
- staple gun;
- Sandpaper of different stiffness;
- Hand milling machine (if the base of the timber will pouf);
- level;
- thick thread and a large needle;
- scissors;
- roulette;
- a piece of chalk;
- sewing machine (if you want to sew a cover).
In addition, you may need paint or stain and varnish.
The first cut seat - its dimensions are the starting point, and all other details, if necessary, is adjusted for the seat.
If you do not have sufficient experience in the manufacture of furniture, the whole process is better to break for a few days, so that every detail has been given due attention.
Step 1: Finish the legs
If you have ready-made screw-in legs, then they must be restored. Sandpaper we clean the surface. Then apply the new paint or varnish and stain. It is better to apply two coats.
If the legs are ready you do not, then they must be made of timber. They will be attached to the seat by means of screws and parts. If possible, it is best to treat the timber with a hand cutter. Such a tool can make custom tabs, and the product will be more interesting. Bruce also cover the stain or paint.
Step 2: Plywood and foam
It is necessary to cut the desired size foam around the plywood. At the same time he must serve at 2-3 cm. from each side. The dimensions are selected individually.
Step 3: Mark up plywood
Glue the foam to the plywood, glue positioning closer to the edges. With the roulette and chalk markings traced on which henceforth sew buttons. We make a few holes in the plywood at the same distance. Foam at the same time trying not to offend.
Step 4: Collect the product, is sheathed in fabric or leather
Cut a square or rectangle of skin or shape of the object tissue. We must carefully calculate the size of the upholstery and fit them under the seat, leave 2-3 cm margin. from each side.
Next you need to carefully wrap the fabric and fix a stapler.
You can install buttons. With the needle thread is first threaded into a button, and then outputted to the opening of plywood under the seat. For better fixation of the thread you can fix brackets.
It is necessary to close a rough finish on the back side of the seat by a textile fabric. Sew a cut piece on the edge of the bottom.
If the legs were of different products, then choose a place to put them, fasten them with screws and the base is screwed. Feet of timber is secured using screws and corners of the seat.
The process consists of several stages. All of them are fairly easy to implement and require only the accuracy and due care.
It is not recommended to make all the necessary parts at a time, especially if the first experience in the manufacture of furniture.
decoration
Buttons is best to choose a color of the upholstery. The amount depends on personal preference. Diversify the banquette can be a decorative cover, which is also possible to make your own. It needs only the skill of working with a sewing machine.
If you do not have the skills of cutting, it is best to use one from the pattern products found on the Internet or watching a master class on self-manufactured.
Calculated banquettes capacity: one person occupies a plot with an area of 45 * 55 cm.
Details jigsaw cut, sanded edges.
For the interior in the Empire style or the Baroque can be made coach tie. This model looks very interesting and presentable.
The parameters of the hall and the maximum possible size of the product.
If a lot of details - partitions, shelves, back, it makes sense to make a mold, and then start cutting plywood sheet.
So you know what to do on their own banquette, with minimal carpentry skills, it is quite real. The main thing is not to hurry and to pay due attention to each step. Then the product will turn out flavorful and beautiful. This type of furniture is not only useful in terms of comfort and space savings, but will also be stylish and original addition to the interior.
Choose a model: with back - quite difficult to implement with a minimum of experience, with shelves, drawers, or on the legs with a support on the sides and so on.
Based on the size of the seat is determined parameters of the remaining elements and draw a sketch.
VIDEO: Making benches home
50 photo ideas how to make your own hands banquette
