Cleaning silver at home: 7 effective ways and tips

For many years, silver products is very popular because in perfect harmony with any clothes, and have a high wear resistance. However, under high humidity and hydrogen sulfide present in the air, of the metal ornament begin to lose gloss and darken. To return them to original appearance it is recommended to use 7 silver cleaning methods at home.

Using ammonia

To clean silverware, you can use a special solution. To cook it you will need:

• 1 part ammonia;
• 10 parts of water.

These components should be mixed, prepared to plunge into a means of decoration for 15 minutes, and then rinse with water and wipe dry with a soft cloth. After this procedure, the product will once again shine like new.

You can do without soaking. In this case, wipe silver ring woolen cloth soaked in ammonia. Such treatment is not suitable for cleaning jewelery with pearls as ammonia can change the color of the gemstone.

Some jewelers silver is used for cleaning solution consisting of water, 3 drops of ammonia and the same amount of liquid soap.

The use of citric acid

This simple and affordable way for silver jewelry without stones. Necessary ingredients:

• 100 g of citric acid;
• 500 ml of water.

The enameled pan to pour liquid pour grenade, and then stir the solution and put in a water bath container. Then take a small piece of copper wire, put on her jewelry and put it into a tool for 20-30 minutes. After this time there will be only rinsed jewel in ordinary water and dry.

Processing toothpaste

it is recommended to use the cleaning agent to clean the contaminants from silver. Can carry out the procedure with a soft woolen cloth or toothbrush. Apply a small amount of paste dentifrice (without any impurities) in the product of silver, and then wait and gently rub it in a circular motion. Then rinse thoroughly with water and dry with a jewelry cloth. After this treatment, the silver shine again.

Mechanical cleaning leads to the fact that silver is starting to wear off, so the rings and bracelets with a beautiful subtle pattern so that it is not necessary to clean.

A paste may be replaced with tooth powder, diluted to pasty consistency.

The use of soda and foil

There is another easy way with which you can remove the black silver jewelry without stones and other inserts. For this purpose, 2 tbsp. l. soda should be diluted in 0.5 L of water, Put the soda solution on the fire and when it begins to boil, lower it and a small piece of silver foil food. After a quarter of an hour is required to remove the decoration of tools and wipe it with a soft cloth. When joining the reaction of soda and aluminum with silver sulfide disappears black, and the products begin to shine, like new.

Soaking in vinegar

Vinegar promotes elimination of black spots, which is often formed on the surface of the noble metal. To clean silver product from the mold, it is necessary to dip it in a warm solution of vinegar 9%, and after 10 minutes and get wiped with a cotton cloth. Jewelry, inlaid stones, it is recommended not to soak, just wipe with a soft cloth dipped in vinegar.

If the result is not clean enough, it can leave the product in acetic solution for another 3 minutes. Vinegar is also suitable for rings, bracelets and other things of gilded silver.

Polishing lipstick

Simple lipstick - good cleaning means for the noble metal because its composition contained titanium dioxide and fat. The first component cleans dirt, and the second - polishes silver thing to shine. To return the product to the original appearance, lubricate it with lipstick and rub squeaky with the help of cosmetic disc.

It should be noted that this method of cleaning may be used exclusively on smooth surfaces.

Rubbing products yolk

This method is an ancient, but very effective. To decoration of silver glittered as new, it is necessary to moisten a cotton pad in raw chicken egg yolk, rub them surface silver things, and then wait until it dries. This is followed by a well-washed, dried and sanded accessory with a napkin. This procedure helps not only to thoroughly clean silver, but also protect it from oxides that provoke browning.

Since the internal parts of the product accumulates a lot of fat and other contaminants, then the carrying out cleaning activities should pay particular attention to the back side of the ring either bracelet.