Comfortable accommodation is associated in humans with the heat in winter and cool in the summer heat. Contribute to this well-formed and well-insulated exterior walls of the home. Products from the company Tehnoblok Standard Technonikol its technical characteristics are ideal for additional insulation of various building structures.
The article describes the plate and permitted uses.
appointment items
Tehnoblok Standard - mineral wool, manufactured using rock related to the basalt group.
Wool formed as separate plates that are convenient for assembly work.
What is used
Slabs of mineral wool according to the manufacturer's recommendations, was used as:
- Insulation of brick masonry, foam -, slag and lightweight aggregate concrete blocks. Sheets placed between the outer wall and the facing masonry.
- Soundproofing the walls of the same materials.
- Thermal and sound insulation of partition walls of different materials, to further finishing.
- The first layer of insulation in the walls, equipped for curtain wall technology.
- Soundproofing partitions.
Attention! Tehnoblok Standard is not intended for thermal insulation of facades of wet plaster. For these types of jobs manufacturer produces other types of plates.
General requirements for insulation materials
The choice of insulation affect its technical and consumer properties. "Good" insulation must meet the requirements of:
- Have a low coefficient of thermal conductivity for the conservation of heat in winter and prevents excessive heating of the wall in the summer.
- Environmental safety for the people living in the house. The material should not release toxic substances during heating and other adverse effects, and may not cause dustiness.
- Fire, be non-flammable and not melting when exposed to open flame.
- Ease of installation.
- Storing of basic physical mechanical characteristics during prolonged use. These include the preservation of the physical dimensions in the range of operating conditions, the plate should not be "slozhivatsya" over time.
- Resistance to decay, infection by fungi and bacteria, low adaptability to rodent life.
All of these properties are responsible produced and sold by the Corporation Technonikol basalt slabs called Tehnoblok standard.
properties of products
Plates Tehnoblok Standard produced by sintering of basalt rock, which leads to the beneficial properties of products and their practicality. Plates have:
- Gidrofobizatsionnymi properties - not absorb moisture.
- Resistant to open flame - the material is not flammable.
- High density promoting resistance to caking and facilitates assembly work. The material retains the structure by mechanical action.
- High strength compared with rolled materials.
- Long service life.
- Excellent thermal and sound insulating properties.
- It is not subject to damage by rodents and pests.
- Resistance to rot.
The disadvantages include the high cost of products, and the need for a mandatory exterior decoration and protection from direct sunlight and precipitation.
characteristics plates
Plates Tehnoblok Standard manufactured and subjected to the tests according to national standards.
The main parameters of products:
- The thermal conductivity of 0.037 to 0.040 W / m.
- Compression ratio (compressibility) of not more than 10%.
- The water vapor permeability of at least 0.3 mg / mh.
- Absorption of moisture by volume - no more than 1.5%.
- Humidity by weight of the sheet is not more than 0.5%.
- Flammability - not supported.
- The material density of 40 to 50 kg / m3.
Such indicators sufficient for thermal insulation of residential premises in accordance with the requirements of the guidance documents on most of the climatic zones of Russia.
Tehnoblok modification is marketed under the name Tehnoblok Prof. The main region of the delivery of the product Far East countries. Insulation has improved performance compared with the standard version and is more suited to the harsh climatic conditions. Thermal conductivity material professional 0,036-0,039 W / m. Compressibility of 8%, and Tehnoblok Prof. density is in the range 60-70 kg / m3.
The length and width of plates for standard and professional product 1200x600 mm.
Thickness Standard Tehnoblok sheet varies from 50 to 200 mm, and for Prof. range from 50 to 150 mm. Step product thickness of 10 mm.
Supply and storage
Tehnoblok Standard comes in packets, packaged in heat-shrinkable plastic film.
Manufacturer obliges merchants to store goods on pallets separated by product type. During storage is not allowed to find packages by precipitation.
Number of plates in the package depends on the geometric dimensions of the sheet. For example, at a thickness of 50 mm package will contain 8 sheets and insulation area is 5.76 m2Or 0.288 m3.
If the gain slab 100 mm thick is 6 units in their packaging., Total surface area of 4.32 m2While the volume of 0.432 m3.
Attention! Before buying a reconciliation at the number supplied in the packaging of products from the seller - may be variations in the configuration.
Proceeding from the above characteristics, opt for standard insulation Tehnoblok do when planned types of insulation in accordance with manufacturer's recommendations. Supplier guarantees 50 years of the life of the insulation without losing the main consumer properties, which makes the products popular in the market.